油气管道风险评价研究

管道风险评价作为管道风险管理的基础,其目的是通过计算某段管道或整条管道系统的风险值对各个管段(或各条管道)进行风险排序,以识别高风险的部位,确定那些最大可能导致管道事故和有利于潜在事故预防的至关重要的因素,确定管段维护的优先次序,为维护活动经济性的决策提供依据,最终使管道的运行管理更加科学化。本文对油气管道风险评价现状及评价方法进行描述,并提出我国油气管道风险评价技术的对策。     

硫化矿床自燃发火实验研究

金属矿山特别是硫化矿山,在开采过程中曾多次发生过矿石自燃火灾事故,给国家造成了巨大的经济损失.我国矿山企业中,有许多硫化矿山.本文综述了国内外在硫化矿床自燃发火实验研究方面的研究进展,指出我国至今还没有出台一套完整成熟的硫化矿床自燃倾向性实验室鉴定标准.     

串联毛细管柱气相色谱分析石脑油中微量甲基叔丁基醚

应用Agilent 6890 plus 气相色谱仪(配有FID),把一根50 m×0.25 mm×0.5 μm PEG-20M毛细管色谱柱和一根100 m×0.25 mm×0.5 μm HP-1毛细管色谱柱串接,使得甲基叔丁基醚(MTBE)能和石脑油中其它组分完全分离,解决了石脑油中微量MTBE的测定难题.方法的标准偏差是0.20%,回收率为100%.     

装置级突发事故应急预案编制的思考与对策

结合石化企业装置生产特点,分析装置级突发事故应急预案编制中存在的不足和问题,并对应急预案编制的思路和处置对策进行了深入地探讨.     

现场安全监督是安全工作的核心

随着石油工业的发展和科学技术的进步,在油气开发和加工的生产中已形成了一套完善、先进的工艺技术,但在生产现场的安全管理方面仍存在着许多薄弱环节和诸多不安全因素.这些不安全因素将导致各类事故的发生,直接威胁着油田的安全生产.     

石化行业职业健康危害因素影响与控制

石化行业生产过程高温、高压、易燃、易爆、易腐蚀,生产工艺伴有毒有害气体、烟尘、工业粉尘、噪声等职业健康危害因素,生产原料、中间产品、最终产品、副产品大多为危险化学品,劳动环境中存在许多职业健康危害因素,作业人员急性职业中毒和慢性职业病多发.因此,做好职业健康防护,杜绝和减少职业健康事故发生将是石化企业一项长期而艰巨的任务.     

有机磷农药降解方法及应用研究新进展

现代农业的发展和有机磷农药的使用密切相关,所造成的严重的农产品和环境污染是农业发展有待解决的关键问题之一。介绍了超声波技术、吸附、洗涤和辐照等物理方法,微生物、降解酶和工程菌等生物方法,水解、氧化分解和光化学降解等化学方法对有机磷农药的降解作用及其相关的应用研究。     

Removal of copper ions from aqueous solution by calcium alginate immobilized kaolin

Kaolin has been widely used as an adsorbent to remove heavy metal ions from aqueous solutions. However, the lower heavy metal adsorption capacity of kaolin limits its practical application. A novel environmental friendly material, calcium alginate immobilized kaolin (kaolin/CA), was prepared using a sol-gel method. The e ects of contact time, pH, adsorbent dose, and temperature on Cu2+ adsorption by kaolin/CA were investigated. The Langmuir isotherm was used to describe the experimental adsorption, the maximum Cu2+ adsorption capacity of the kaolin/CA reached up to 53.63 mg/g. The thermodynamic studies showed that the adsorption reaction was a spontaneous and endothermic process.     

Effects of Cu（Ⅱ） and humic acid on atrazine photodegradation

This work was designed to explore the characteristics of photodegradation of herbicides in the copper-polluted water body. The results showed that Cu(II) alone could induce a photo Fenton-like reaction to enhance the degradation of atrazine, in which hydroxyl radical ( OH) was a main active species. Humic acids restrained atrazine degradation, nevertheless, when introducing Cu(II), the photodegradation was accelerated, in which singlet oxygen (1O2) replaced OH acting as the prevailing species. A feasible mechanism for the photochemical process was also proposed, which is helpful for better understanding the environmental photochemistry of atrazine in the copper-polluted water.     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.