锰铜铈氧化物催化剂氧化NO性能及动力学研究

实验以TiO2为载体采用浸渍法制备CuOx/TiO2、CeOx/TiO2、CuCeOx/TiO2和MnCuCeOx/TiO2催化剂,考察这些催化剂氧化NO活性,探究Cu、Ce摩尔比和添加Mn元素对CuCeOx/TiO2催化剂氧化NO活性的影响,使用扫描电镜观察催化剂表面结构。研究发现,Cu、Ce元素配合后的CuCeOx/TiO2催化剂氧化活性明显好于单独含Cu、Ce的催化剂,当Cu、Ce摩尔比为Cu:Ce=1∶2时,CuCeOx/TiO2催化剂氧化活性最好,在NO浓度500×10-6,O210%,空速为24 000 h-1,350℃时,NO氧化度为0.62;添加Mn元素可以提高CuCeOx/TiO2催化剂低温氧化活性,250℃时,MnCuCe/Ti-3和MnCuCe/Ti-5催化剂氧化度为0.53和0.69,300℃时,MnCuCe/Ti-3和MnCuCe/Ti-5催化剂氧化度均为0.76;此外,实验还研究了NO在MnCuCe/Ti-3催化剂上反应的动力学方程。     

丝状菌污泥膨胀及其致密过程中菌丝体演替规律

为了探索丝状菌的致密途径、解决丝状菌污泥膨胀的难题,从丝状菌的自身特点及外部条件出发研究了其在污泥膨胀及致密过程中菌丝体的演替规律。研究发现,致密生长的大絮体对丝状菌的种类是有选择性的,那些丝体较弯曲、丝体强度较大、贮存能力强的菌丝体更利于形成聚集态生长。另外,研究表明,不同种类丝状菌的生长势和存贮能力不同,对底物的利用上亦存在着竞争关系。实验中存在的几个菌种对PHB颗粒的存贮能力由高到低依次为:Nostocoida limicolaⅡ、Type 1851、Type 0701、Type 021N型菌体。     

粉煤灰的改性及对刚果红的吸附

分别采用沸水浸泡、酸浸、碱浸和加热的方法对粉煤灰进行改性处理,利用FTIR仪和XRD仪对改性粉煤灰的成分和官能团进行了分析,并利用改性粉煤灰对模拟刚果红废水进行脱色。实验结果表明：碱改性粉煤灰中含有大量官能团,以及NaPl型沸石类物质,能够明显提高粉煤灰对刚果红的吸附性能;与活性炭相比,碱改性粉煤灰具有更高的性价比;在初始刚果红质量浓度为20mg/L、碱改性粉煤灰加入量为50g/L的条件下,废水的脱色率可达87.52%;碱改性粉煤灰对刚果红的吸附过程遵循二级反应动力学,较好地符合Langmuir等温式和Freundlich等温式。     

高电压电容吸附法处理模拟含盐废水

针对电容吸附除盐法的缺点,通过对电极进行绝缘处理,开发了一种新型高电压电容吸附除盐技术。实验结果表明：增大外加电压,有利于除盐效率的提高;外加电压为60V时,NaCl去除率可达90%以上;增大废水流速对吸附效果不利;反应温度对处理效果的影响不大;在NaCl质量浓度为80mg/L、外加电压为60V、反应温度为25℃、废水流速为36m/s、反应时间为30min的条件下,经一级处理和二级处理后出水的NaCl质量浓度分别为39mg/L和16mg/L,NaCl去除率分别为51.3%和80.0%。     

用Ti/SnO2-RuO2电极处理黑索金废水

利用刷涂法制备了Ti/SnO2-RuO2电极,并通过SEM、XRD等测试手段对其进行形貌及结构表征。利用该电极为阳极处理黑索金(RDX)废水,考察了电解质种类、电解质质量浓度、废水pH、电流密度以及电解时间等对RDX电催化氧化效果的影响。实验结果表明,当处理100 mL质量浓度为50 mg/L的RDX废水时,以Na2SO4为电解质、Na2SO4质量浓度为5.0 g/L、废水pH为7、电流密度为15 mA/cm2、电解时间为300 min的条件下,RDX去除率达到82.55%,COD去除率达到55.41%。     

地面浓度反推法计算石化企业无组织排放源强

对某石化企业储罐区和原油脱酸装置区的无组织排放非甲烷总烃进行监测,对监测数据进行Pearson相关分析,运用地面浓度反推法计算源强。实验结果表明：原油脱酸装置区各采样线浓度间的相关性好,反推出的源强较为准确,50,100,150 m采样线的反推源强非常接近,分别为21.68,21.60,19.76 t/a;而储罐区监测浓度的相关性不佳,该区域的非甲烷总烃无组织排放源可能不单一,不适用地面浓度反推法计算其源强。     

Structure and Properties of Cocoons and Silk Fibers Produced by Attacus atlas

Silk fibers in the three layers of Attacus atlas (A. atlas) cocoons have morphological structure and tensile properties similar to that of Bombyx mori silk. Attempts are being made to produce silk for commercial applications from cocoons of relatively unknown wild insects due to the unique properties of the fibers and as a source of income and employment. In this research, A. atlas cocoons were used to study the chemical composition, morphology, physical structure and tensile properties of the silk fibers in the cocoons and ability of the fibers to support the attachment and proliferation of mouse fibroblast cells. It was found that A. atlas cocoons consists of outer, intermediate and inner layer with average breaking tenacity of 4.1, 4.3 and 3.6 g/den, respectively similar to that of B. mori silk (4.3–5.2 g/den). The heavier cocoons, less restrictive rearing conditions and good properties of the fibers compared to B. mori silk makes A. atlas a potential alternative to common silks for commercial scale silk production. A. atlas fibers had about 80 % higher optical densities of cells and extensive growth of F-actin compared to B. mori silk fibers.     

Catalytic hydrolysis of urea from wastewater using different aluminas by a fixed bed reactor

In order to find an effective method for treating urea wastewater, the experiments on the hydrolysis of urea in wastewater were conducted in a fixed bed reactor with different aluminas (α-Al₂O₃, γ-Al₂O₃, and η-Al₂O₃) as catalysts respectively in contrast with inert ceramic particle. The results indicate that the three alumina catalysts show obvious catalytic activity for urea hydrolysis at 125 °C. The order of activity is η-Al₂O₃?>?γ-Al₂O₃?>?α-Al₂O₃, and the activity difference increases with increasing temperature. According to the characterization results, surface acidity has little impact on the activity of catalyst. However, it was found that surface basicity of alumina catalyst plays an important role in catalytic hydrolysis of urea, and the activity of catalyst may be also influenced by the basic strength. With η-Al₂O₃ as catalyst, the urea concentration in wastewater is reduced to 4.96 mg/L at a temperature of 165 °C. Moreover, the η-Al₂O₃ shows a good stability for urea hydrolysis. The hydrolysis of urea over η-Al₂O₃ catalyst can evidently reduce the reaction temperature and is promising to replace industrial thermal hydrolysis process.     

Behavior and mechanism of arsenate adsorption on activated natural siderite: evidences from FTIR and XANES analysis

Activated natural siderite (ANS) was used to investigate its characteristics and mechanisms of As(V) adsorption from aqueous solution. Batch tests were carried out to determine effects of contact time, initial As(V) concentration, temperature, pH, background electrolyte, and coexisting anions on As(V) adsorption. Arsenic(V) adsorption on ANS well-fitted pseudo-second-order kinetics. ANS showed a high-adsorption capacity of 2.19 mg/g estimated from Langmuir isotherm at 25 °C. Thermodynamic studies indicated that As(V) adsorption on ANS was spontaneous, favorable, and endothermic. ANS adsorbed As(V) efficiently in a relatively wide pH range between 2.0 and 10.0, although the removal efficiency was slightly higher in acidic conditions than that in basic conditions. Effects of background electrolyte and coexisting anions were not significant within the concentration ranges observed in high As groundwater. Results of XRD and Fe K-edge XANES analysis suggested ANS acted as an Fe(II)/(III) hybrid system, which was quite effective in adsorbing As from aqueous solution. There was no As redox transformation during adsorption, although Fe(II) oxidation occurred in the system. Two infrared bands at 787 and 872 cm^?1 after As(V) adsorption suggested that As(V) should be predominantly adsorbed on ANS via inner-sphere bidendate binuclear surface complexes.     

粉末活性炭对三烯丙基异氰脲酸酯的吸附性能简

用静态吸附法考察粉末活性炭对水中三烯丙基异氰脲酸酯（CAIC）的吸附行为,采用单因素分析法对活性炭吸附化工废水中TAIC的工艺条件进行研究。实验结果表明,在TAIC模拟废水中,其TAIC初始浓度为800 mg/L,pH为7,在温度为298 K、转速为150 r/min的条件下,当活性炭的投加量达到4.4 g/L,吸附反应时间为50 min时,TAIC的去除效率最高为96.17%;对于实际废水,其TAIC初始浓度为1 500 mg/L,溶液pH为3,在温度为298 K、转速为150 r/min的条件下,当活性炭投加量达到10 g/L,吸附反应时间为2 h时,TAIC的去除效率最高为46.8%。这也是由于实际废水组分复杂,其他有机物存在一定的吸附竞争机制。