Four NF membranes were compared regarding arsenate rejection and their properties.Rejection of arsenate had no relationship with membrane pore size.A more negative surface charge was favorable for arsenate rejection at neutral pH.A severe membrane fouling could lead to a great reduction of arsenic rejection. Nanofiltration (NF) has a great potential in removing arsenate from contaminated water. The performance including arsenate rejection, water permeability and resistance to fouling could however differ substantially among NF membranes. This study was conducted to investigate the influence of membrane pore size and surface properties on these aspects of membrane performance. Four fully-aromatic NF membranes with different physicochemical properties were adopted for this study. The results showed that surface charge, hydrophobicity, roughness and pore size could affect water permeability and/or arsenate rejection considerably. A more negative surface charge was desirable to enhance arsenate rejection rates. NF90 and a non-commercialized membrane (M#1) demonstrated the best performance in terms of arsenate rejection and water permeability. The M#1 membrane showed less membrane fouling than NF90 when used for filtration of real arsenic-containing groundwater. This was mainly due to its distinct chemical composition and surface properties. A severe membrane fouling could lead to a substantial reduction of arsenic rejection. The M#1 membrane showed the best performance, which indicated that membrane modification could indeed enhance the overall membrane performance for water treatment. 相似文献
The distributions of ARGs were monitored in a WWTP in Harbin during six months.CASS had the best removal efficacy of ARGs compared to other processes in the WWTP.UV disinfection could effectively control the HGT.AGAC significantly remove ARGs and organics due to its high absorption capacity.Combination of ozone and AGAC significantly improve removal of ARGs and organics. Antibiotic resistance genes (ARGs) pose a serious threat to public health. Wastewater treatment plants (WWTPs) are essential for controlling the release of ARGs into the environment. This study investigated ARG distribution at every step in the treatment process of a municipal WWTP located in Harbin for six consecutive months. Changes in ARG distribution involved in two advanced secondary effluent treatment processes, ozonation and granular activated carbon (GAC) adsorption, were analyzed. Biological treatment resulted in the highest ARG removal (0.76–1.94 log reduction), followed by ultraviolet (UV) disinfection (less than 0.5-log reduction). Primary treatment could not significantly remove ARGs. ARG removal efficiency increased with an increase in the ozone dose below 40 mg/L. However, amorphous GAC (AGAC) adsorption with a hydraulic retention time (HRT) of 1 h showed better removal of ARGs, total organic carbon (TOC), total nitrogen (TN), and total phosphorus (TP) than ozonation at a 60 mg/L dose. UV treatment could efficiently reduce the relative ARG abundance, despite presenting the lowest efficiency for the reduction of absolute ARG abundance compared with GAC and ozone treatments. The combination of ozone and AGAC can significantly improve the removal of ARGs, TOC, TN and TP. These results indicate that a treatment including biological processing, ozonation, and AGAC adsorption is a promising strategy for removing ARGs and refractory organic substances from sewage. 相似文献
• Biochar enhanced the mobility and stability of zero-valent iron nanoparticles.• Particle performance was best when the BC:nZVI mass ratio was 1:1.• Bagasse-BC@nZVI removed 66.8% of BDE209. The addition of nano zero-valent iron (nZVI) is a promising technology for the in situ remediation of soil. Unfortunately, the mobility and, consequently, the reactivity of nZVI particles in contaminated areas decrease due to their rapid aggregation. In this study, we determined how nZVI particles can be stabilized using different types of biochar (BC) as a support (BC@nZVI). In addition, we investigated the transport behavior of the synthesized BC@nZVI particles in a column filled with porous media and their effectiveness in the removal of BDE209 (decabromodiphenyl ether) from soil. The characterization results of N2 Brunauer–Emmett–Teller (BET) surface area analyses, scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) indicated that nZVI was successfully loaded into the BC. The sedimentation test results and the experimental breakthrough curves indicated that all of the BC@nZVI composites manifested better stability and mobility than did the bare-nZVI particles, and the transport capacity of the particles increased with increasing flow velocity and porous medium size. Furthermore, the maximum concentrations of the column effluent for bagasse–BC@nZVI (B–BC@nZVI) were 19%, 37% and 48% higher than those for rice straw–BC@nZVI (R–BC@nZVI), wood chips–BC@nZVI (W–BC@nZVI) and corn stalks–BC@nZVI (C–BC@nZVI), respectively. A similar order was found for the removal and debromination efficiency of decabromodiphenyl ether (BDE209) by the aforementioned particles. Overall, the attachment of nZVI particles to BC significantly increased the reactivity, stability and mobility of B–BC@nZVI yielded, and nZVI the best performance. 相似文献
• Bi2O3 cannot directly activate PMS.• Bi2O3 loading increased the specific surface area and conductivity of CoOOH.• Larger specific surface area provided more active sites for PMS activation.• Faster electron transfer rate promoted the generation of reactive oxygen species.• 1O2 was identified as dominant ROS in the CoOOH@Bi2O3/PMS system. Cobalt oxyhydroxide (CoOOH) has been turned out to be a high-efficiency catalyst for peroxymonosulfate (PMS) activation. In this study, CoOOH was loaded on bismuth oxide (Bi2O3) using a facile chemical precipitation process to improve its catalytic activity and stability. The result showed that the catalytic performance on the 2,4-dichlorophenol (2,4-DCP) degradation was significantly enhanced with only 11 wt% Bi2O3 loading. The degradation rate in the CoOOH@Bi2O3/PMS system (0.2011 min−1) was nearly 6.0 times higher than that in the CoOOH/PMS system (0.0337 min−1). Furthermore, CoOOH@Bi2O3 displayed better stability with less Co ions leaching (16.4% lower than CoOOH) in the PMS system. These phenomena were attributed to the Bi2O3 loading which significantly increased the conductivity and specific surface area of the CoOOH@Bi2O3 composite. Faster electron transfer facilitated the redox reaction of Co (III) / Co (II) and thus was more favorable for reactive oxygen species (ROS) generation. Meanwhile, larger specific surface area furnished more active sites for PMS activation. More importantly, there were both non-radical (1O2) and radicals (SO4−•, O2−•, and OH•) in the CoOOH@Bi2O3/PMS system and 1O2 was the dominant one. In general, this study provided a simple and practical strategy to enhance the catalytic activity and stability of cobalt oxyhydroxide in the PMS system. 相似文献
• 1,4-Dioxane was degraded via the photo-Fenton reactive membrane filtration.• Degradation efficiency and AQY were both enhanced in photocatalytic membrane.• There is a tradeoff between photocatalytic degradation and membrane permeation flux.• Degradation pathways of 1,4-Dioxane is revealed by DFT analysis. The present study evaluated a photo-Fenton reactive membrane that achieved enhanced 1,4-Dioxane removal performance. As a common organic solvent and stabilizer, 1,4-Dioxane is widely used in a variety of industrial products and poses negative environmental and health impacts. The membrane was prepared by covalently coating photocatalyst of goethite (α-FeOOH) on a ceramic porous membrane as we reported previously. The effects of UV irradiation, H2O2 and catalyst on the removal efficiency of 1,4-Dioxane in batch reactors were first evaluated for optimized reaction conditions, followed by a systematical investigation of 1,4-Dioxane removal in the photo-Fenton membrane filtration mode. Under optimized conditions, the 1,4-Dioxane removal rate reached up to 16% with combination of 2 mmol/L H2O2 and UV365 irradiation (2000 µW/cm2) when the feed water was filtered by the photo-Fenton reactive membrane at a hydraulic retention time of 6 min. The removal efficiency and apparent quantum yield (AQY) were both enhanced in the filtration compared to the batch mode of the same photo-Fenton reaction. Moreover, the proposed degradation pathways were analyzed by density functional theory (DFT) calculations, which provided a new insight into the degradation mechanisms of 1,4-Dioxane in photo-Fenton reactions on the functionalized ceramic membrane. 相似文献