Leaching behavior of heavy metals from municipal solid waste incineration bottom ash and its geochemical modeling

With the increase in the number of municipal solid waste incineration (MSWI) plants constructed in China recently, great attention has been paid to the heavy metal leaching toxicity of MSWI residues. In this study, the effects of various parameters, including extractant, leaching time, liquid-to-solid ratio, leachate pH, and heavy metal content, on the release properties of Cd, Cr, Cu, Ni, Pb, and Zn from MSWI bottom ash were investigated. Partial least-squares analysis was employed to highlight the interrelationships between the factors and response variables. Both experimental research and geochemical modeling using Visual MINTEQ software were conducted to study the pH-dependent leaching behavior of these metals in fresh and weathered bottom ash, considering precipitation/dissolution and surface complexation reactions (adsorption by hydrous ferric oxide and amorphous aluminum oxide/hydroxide). The results showed that leachate pH was the predominant factor influencing heavy metal leachability. The leaching of Cu, Pb, and Zn was mainly controlled by precipitation/dissolution reactions, whereas surface complexation had some effect on the leaching of Cr, Cd, and Ni for certain pH ranges. The modeling results aggreed well with the experimental results. Part of this work was presented at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)     

Modeling the Effects of Potential Salinity Shifts on the Recovery of Striped Bass in the Savannah River Estuary,Georgia–South Carolina,United States

Increased salinity in spawning and nursery grounds in the Savannah River estuary was cited as the primary cause of a 97% decrease in adult striped bass (Morone saxatilis) and a concomitant 96% decrease in striped bass egg production. Restoration efforts focused on environmental remediation and stock enhancement have resulted in restored salinity patterns and increased egg and adult abundances. However, future water needs or harbor development may preclude further recovery by reducing freshwater inflow or increasing salinity intrusion. To assess the effect of potential changes in the salinity regime, we developed models relating discharge, tidal phase, and salinity to striped bass egg and early larval survival and re-cast these in a quantitative Bayesian belief network. The model indicated that a small upstream shift (≤1.67 km) in the salinity regime would have the least impact on striped bass early life history survival, whereas shifts >1.67 km would have progressively larger impacts, with a 8.33-km shift potentially reducing our estimated survival probability by >28%. Such an impact could have cumulative and long-term detrimental effects on the recovery of the Savannah River striped bass population. The available salinity data were collected during average and low flows, so our model represents some typical and some extreme conditions during a striped bass spawning season. Our model is a relatively simplistic, “first-order” attempt at evaluating potential effects of changes in the Savannah River estuarine salinity regime and points to areas of concern and potential future research.     

城市垃圾预处理改善焚烧特性的探讨

针对目前我国城市垃圾的高水分、低热值的特性,提出了2种改善城市垃圾焚烧特性的有效措施:生物质垃圾源分类和生物干燥.在我国建立生物质垃圾源分类体系,将生物质垃圾源头分类后,剩余垃圾的热值可以提高约50%～120%,已适合直接入炉焚烧,同时分离出来的生物质垃圾也更易于好氧堆肥或厌氧消化.另外一项技术措施是在焚烧前利用生物干燥技术,降低城市垃圾的水分含量,提高入炉垃圾的热值,这种方法主要是利用生物反应热来干燥城市生活垃圾,只需要在垃圾投入焚烧炉前增加一个预处理步骤,不必改变目前的垃圾收运体系,而且进行生物干燥后的垃圾更易于分选其中的可回收物质.     

Co3O4/介孔分子筛催化剂对苯催化完全氧化的研究

分别以介孔分子筛MCM-41、MCM-48、SBA-15为载体,采用等体积浸渍法制备了氧化钴/介孔分子筛催化剂,利用N₂吸附、X射线衍射、程序升温还原等技术对催化剂进行了表征,考察了Co₃O₄的负载量及载体的孔结构对催化剂完全催化氧化苯的性能的影响。结果表明,Co₃O₄的负载量为20%时,催化剂的催化活性最好;载体的孔径和催化剂的可还原性能是影响催化活性的主要因素,催化剂活性顺序为Co₃O₄ /SBA-15> Co₃O₄ /MCM41> Co₃O₄ /MCM-48。     

有毒气体危害区域划分之临界浓度标准研究

通过研究毒物伤害准则进而界定有毒气体危害浓度,对有毒气体泄漏扩散后的危害区域进行分级划分,以采取相应的防护措施,最大限度的即时有效的减轻有毒气体对人员的伤害.最后,以氯为例,对比其在不同伤害准则下危害区域划分临界浓度标准值,数值差别较大,因此在使用时应根据实际情况加以判断,选择最适当的标准来划分危害区域.     

废塑料处理技术进展与展望

文章介绍了解决废塑料污染的几种方法,分析了目前我国废塑料回收利用技术的现状,并介绍作者在这方面进行的一些新的研究工作：（1）使用自制的催化剂完成了聚烯烃类塑料催化热解回收燃料油的小试,获得了较好的效果;（2）通过实验对发泡聚苯乙烯热解回收苯乙烯单体的工艺流程提出了优化操作条件。根据国内外实际,文章最后对废塑料回收利用提出了几点建议。     

稻草制浆黑液生物＋混凝处理试验

通过对稻草制浆黑液厌氧、好氧、混凝处理组合工艺的试验研究,探索该工艺的可行性,考察了不同温度、不同有机负荷下,该类废水的生物处理效果以及后续混凝效果。结果表明：中温35℃是厌氧阶段最佳处理温度,好氧阶段不同负荷条件下,CODCr去除率基本相同;经厌氧－好氧处理,黑液CODCr和木质素去除率分别为80％和30％,色度去除不明显;混凝阶段CODCr和木质素去除率分别为70％和90％,色度去除率达90％以上,出水达到国家标准。     

双负载双金属催化剂催化有机卤化物水相脱卤研究

通过把起相转移作用的聚乙二醇链固载在硅胶上（SiO2-PEG600）,再将聚乙稀吡咯烷酮（PVP）络合双金属Pd-Cu(PVP-PdCl2-CuCl2)后负载其中,制成一种新型双负载双金属水相脱卤催化剂PVP－PdCl2-CuCl2/SiO2-PEG600。以甲酸钠为氢转移试制,在水相中催化有机卤化物脱卤,研究结果表明：反应温度为800℃,Pd∶Cu=2∶1（摩尔比）,反应介质pH≈11.7左右时,该催化剂对芳香氯化物及α－氯代酮、酯具有良好的催化脱氯和重复使用性能。     

阳离子表面活性剂十六烷基三甲基溴化铵对酞酸酯类化合物增溶性研究

用阳离子表面活性剂十六烷基三甲基溴化铵对六种酞酸酯类化合物(五种脂肪链酞酸酯和一种苯基酞酸酯)进行了增溶性实验．结果表明,在表观浓度(Ｃｓ)小于临界胶速浓度(ＣＭＣ)时,十六烷基三甲基溴化铵对四种酞酸酯(ＤＭＰ和ＤＰｈＰ除外)有一定程度的增溶作用;当Ｃｓ大于ＣＭＣ时,对六种化合物的增溶性显著增强．其增溶性(Ｓｔ/Ｓｗ)随Ｃｓ增大而线性递增:当Ｃｓ＜ＣＭＣ时,Ｓｔ/Ｓｗ＝ａ＋Ｋｍｎ·Ｃｓ,ｒ＞０．９０,ｎ＝５;当Ｃｓ＞ＣＭＣ时,Ｓｔ/Ｓｗ＝ａ＋Ｋｍｃ·Ｃｓ,ｒ＞０．９９,ｎ＝５． 各化合物增溶系数随各自固有水溶性(Ｓｗ)减小而增大(苯基酞酸酯有所反常),ｌｇＫｍｎ和ｌｇＫｍｃ与各自ｌｇｌ/Ｓｗ具有良好的线性正相关性．本文进一步对增溶机理进行了分析解释．     

垃圾堆肥场堆肥废气环境影响评价分析

垃圾堆肥场的建设将改变目前垃圾任意堆放的局面 ,堆肥产品可用于林业使垃圾得到无害化处理 ,并变废为宝。尽管如此在垃圾堆肥过程中还将释放出有害气体和垃圾渗透液等影响环境质量。针对堆肥所产生的大气污染物进行源强确定、扩散计算 ,分析其影响范围并推算卫生防护距离。