N2O profiles in the enhanced CANON process via long-term N2H4 addition: minimized N2O production and the influence of exogenous N2H4 on N2O sources

Environmental Science and Pollution Research - Production of the greenhouse gas nitrous oxide (N2O) from the completely autotrophic nitrogen removal over nitrite (CANON) process is of growing...     

CO2资源化利用的现状及前景

介绍了CO2分离捕集最新工艺——电化学法、膜法、化学循环燃烧法的研究进展。评述分析了CO2的各种资源化应用前景：CO2气体用作生物碳源、辅助注射成型剂及有机物（如氨基甲酸酯、表面活性剂）合成原料等;液态CO2用于人造金刚石、热泵干燥、超临界CO2萃取及固体干冰冷喷射清洗等。CO2作为一种潜在的丰富碳源,应不断研发其新的应用领域,加快其工业化应用。     

原料含水率及成型直径对秸秆成型燃料耐久性的影响

原料含水率及成型直径对秸秆成型燃料耐久性具有重要影响,通过试验发现含水率对秸秆固化成型(SDBF)技术的抗渗水性影响很显著,原料含水率10%～15%(质量分数,下同)范围内得到的SDBF渗水分解超过4 h;原料含水率也显著影响SDBF的抗跌碎性,含水率不大于15%的SDBF失重率一般不超过5%,能满足规模化技术的应用.对于HPB-成型机生产的SDBF,成型直径大的SDBF抗渗水性时间较长,随着成型直径减小抗渗水性时间减少,抗渗水性能降低.     

Distribution,source, and environmental risk assessment of phthalate esters (PAEs) in water,suspended particulate matter,and sediment of a typical Yangtze River Delta City,China

Phthalates (PAEs) in drinking water sources such as the Yangtze River in developing countries had aroused widespread concern. Here, the water, suspended particulate matter (SPM), and sediment samples were collected from 15 sites in wet and dry seasons in Zhenjiang, for the determination of six PAEs (DMP, DEP, DIBP, DBP, DEHP, and DOP) using the solid-phase extraction (SPE) or ultrasonic extraction coupled with gas chromatography-mass spectrometry (GC-MS). The total concentrations of six PAEs (Σ₆PAEs) spanned a range of 2.65–39.31 μg L^?1 in water, 1.97–34.10 μg g^?1 in SPM, and 0.93–34.70 μg g^?1 in sediment. The partition coefficients (K_d1) of PAEs in water and SPM phase ranged from 0.004 to 3.36 L g^?1 in the wet season and from 0.12 to 2.84 L g^?1 in the dry season. K_d2 of PAEs in water and sediment phase was 0.001–9.75 L g^?1 in the wet season and 0.006–8.05 L g^?1 in the dry season. The dominant PAEs were DIBP, DBP, and DEHP in water and SPM, DIBP, DEHP, and DOP in sediment. The concentration of DBP in water exceeded the China Surface Water Standard. The discharge of domestic sewage and industrial wastewater might be the main potential sources of PAEs. The risk quotient (RQ) method used for the risk assessment revealed that DBP (0.01 < RQ < 1) posed a medium risk, while DIBP and DEHP (RQ > 1) posed a high environmental risk in water, DIBP (RQ > 1) also showed a high risk in sediment.

     

膜过滤-气相色谱法测定涂料中的苯系物、环己酮和甲苯二异氰酸酯

采用膜过滤-气相色谱法测定涂料中的苯系物、环己酮和甲苯二异氰酸酯（TD I）。用7种规格的石英毛细管色谱柱对混合标准溶液和涂料试样进行了分析实验,实验结果表明,不同属性的涂料试样添加固定量的正十四烷作内标物,经膜过滤净化后,苯系物、环己酮和TD I可采用DB-1-3或DB-1-2色谱柱同时分离并测定。测试数据经多级校准曲线处理后涂料试样中苯系物、环己酮和TD I的加标回收率为98.6%～101.8%,各组分分析结果的变异系数均小于2.0%,检出限均小于1.50×10^-5g。     

Estimating ‘rhizosphere priming effect’: Comparison of the indirect <Emphasis Type="Italic">y</Emphasis>-intercept regression approach and direct bare plot Approach

Determined the contribution of root derived CO₂ efflux to total CO₂ efflux (including root and non-root derived CO₂ efflux) is import to grope the mechanism of CO₂ efflux, however, becaused of ‘rhizoshere priming effect’ (RPE), it is difficult to achieve in practice. In this study, we attempted to estimate the RPE via comparing basal soil respiration (R_b) achieved by two different methods namely, y-intercept regression and direct bare plot approach in an arid cotton field, central Asia. On the basis of the y-intercept of linear regressions between below-ground respiration (BGR) and root biomass, R_b was indirectly calculated. Comparing with the first approach, the second approach involved direct measurements of soil respiration from bare plots. R_b estimated by y-intercept method contained the component of RPE whereas direct bare plot did not. We found that RPE showed a phenological trend with highest value in flowering stage at 0.145 g CO₂ m^–2 h^–1 and lowest at budding stage (0.007 g CO₂ m^–2 s^–1), even after the data had been corrected for the influence of soil temperature. We concluded that RPE needed to be considered when R_b was estimated by y-intercept approach.     

The key elements analysis of Guangdong & Shenzhen ETS & tips for China national ETS construction

The only joint effort area of provincial and municipal governments resides in Guangdong Province and Shenzhen City in China’s carbon emission trading system (ETS) pilots, which characterize the national carbon ETS plots. The present study on the operating experience from this area has important reference value for the national carbon ETS. Analysis and comparison of the key elements show many differences in coverage, total allowance, allowance allocation, and MRV mechanism between Guangdong and Shenzhen carbon ETS. The present study provides the following explanation: (1) the design characteristics of carbon ETS (e.g. coverage, total quotas, the allocation, and MRV mechanism) depend on the local geographical conditions and policy goals. The differences of economic structure in Guangdong Province and Shenzhen City result in different coverage, which then result in differences in other management elements. (2) The operating state of the carbon market is affected by overall design of carbon ETS: in the case of tighter total allowance, lower proportion of China Certified Emission Reductions, and harsher punishment, the carbon market is relatively active, which intends to produce carbon financial market. Based on deep analysis of operation characteristics of carbon ETS in Guangdong and Shenzhen, the present study suggests that (1) the allowance should be allocated freely at the beginning stage and then gradually transited to the voluntary paid auction; (2) the allowances assigned to companies shall be linked up with their energy-saving objectives; (3) the output fluctuations and economic influence on the allowance allocation should be properly handled to maintain the fairness and consistence of allowance allocation standards; (4) stable public expectation is one of the key elements to maintain the regular operation of carbon ETS; (5) constrained carbon emission behavior outside ETS can contribute to social justice; and (6) the improvement of professional skills of relevant personnel in the enterprise and independent third party can enhance carbon emissions data reliability.     

烟草烟雾对室内空气颗粒物浓度的影响

采用电称冲击低压系统(ELPI)将无烟室和吸烟室内的空气颗粒物(0.03～10.00 μm)分成12级,对其粒子数和质量浓度进行测定.结果表明,吸烟室PM0.03～10.00的日平均粒子数和质量浓度分别是无烟室的1.50、1.13倍.烟草烟雾对室内颗粒物粒子数的影响集中在0.03～1.00 μm粒径段;对室内颗粒物质量浓度的影响表现为双模态结构,峰值分别在0.20～0.70、5.00～8.20 μm粒径段.烟草烟雾颗粒物的粒子数和质量浓度随烟雾消散时间的增加而减少,粒径越小,减小的越明显;烟草烟雾颗粒物在室内消散缓慢,会在长时间内造成影响,应引起足够关注.     

双水相气浮浮选光度法处理环境水样中痕量土霉素残留物

建立了一种新型分离方法--双水相气浮浮选光度法,使其处理环境水样中痕量土霉紊(OTC)残留物,研究了其工作原理,并用高效液相色谱法对该方法的可靠性进行了验证.利用自制的双水相气浮浮选装置,选择四氢呋喃作亲水有机溶剂、质量分数为10%的NaCl溶液作分相剂,NaOH溶液调节pH,将Cu2+与OTC形成的疏水配合物浮选至有机相,实现OTC与水样分离.浮选完毕后,经紫外-可见分光光度法分析,线性回归方程为A=1.532×105c+0.1230(其中:A为有机相的吸光度;c为水样的OTC摩尔浓度,mol/L),相关系数为0.9998,该方法的线性范围为4.8×10-7～7.3×10-5 mol/L,OTC加标回收率为99.5%～100.1%.