受限空间环境压力对三元锂离子电池热失控影响

为研究三元锂离子电池在空运低压环境中的安全性,通过自主设计搭建的封闭式变压实验舱开展相关实验,对不同荷电状态(SOC)下的三元锂离子电池在不同压力环境(101,80,60,40 kPa)下的热失控特性进行研究,采集电池热失控过程中的温度以及实验舱内的压力变化,并对热失控后实验舱内的气体成分进行分析.结果表明:三元锂离子...     

化学消毒法与医疗废物处理

本文介绍了医疗废物化学消毒处理技术和标准要求,并对采用该方法处理医疗废物在我国的应用提出了相关建议。     

汶川大地震宏观震中问题的讨论

采用大地震诱发崩塌滑坡特点与地面破坏程度相结合,以及极震区几何中心方法,定性判定了汶川大地震的宏观震中位置。判定结果是汶川大地震应该有2个宏观震中,一是映秀镇牛圈沟为映秀极震区宏观震中,坐标位置:31.045 6°N,103.455 6°E;二是北川老县城为北川极震区宏观震中,坐标位置:31.863 7°N,104.361 0°E。两种判定方法相比,前者更符合山区特殊地质地貌环境下的地震破坏规律。     

Hawaiian Residents’ Preferences for Miconia Control Program Attributes Using Conjoint Choice Experiment and Latent Class Analysis

Invasive species control or eradication is an important issue. On the islands of Hawaii, this problem is exceedingly evident when it comes to Miconia calvescens (Miconia). Adequate funding is needed to control or eradicate this invasive plant, but with the limited amount of funding available for the fight against Miconia, it is important to make sure that the fund is being spent in a way that addresses the needs or preferences of the Hawaiian residents. Using the conjoint choice experiment method, we designed a survey that would measure the Hawaiian residents’ willingness to support Miconia control program attributes. The attributes focused on were cost, biodiversity loss, extent of spread and soil erosion. Latent class approach was used to assess the surveyed population to see the different preferences by individual classes. The results show three different classes or groups of individuals with varying preferences for a control program of which cost and erosion were the top preferred attributes among the classes. These groups were defined by their socio-demographics of income, the length of residency and exposure to farming/gardening activities. Even with a preference for lower cost, a group showed willingness to pay more ($2.40) for a program that reduces erosion from high to low. Finally, the biodiversity attribute had very low consideration from a majority of the respondents showing the need for educating the public regarding its importance in preserving the unique environment in Hawaii.     

Assessment of popular techniques for co-processing municipal solid waste in Chinese cement kilns

• Municipal solid waste (MSW) was fermented, screened, gasified, then co-processed. • Co-processing MSW in cement kilns could cause excessive pollutant emissions. • Bypass flue gas can be disposed of through the main flue system. • Popular MSW co-processing methods do not affect cement quality. Cement kiln co-processing techniques have been developed in the past 20 years in China, and more than 60 factories now use fermentation, screening, and gasification pre-treatment techniques to co-process municipal solid waste (MSW). There three complete MSW pre-treatment techniques, co-processing procedures, and environmental risk assessments have been described in few publications. In this study, we assessed the effectiveness of each technique. The results suggested that the pollutant content released by each pre-treatment technology was lower than the emission standard. To reveal the mechanisms of pollutant migration and enrichment, the substances in the kiln and kiln products are investigated. The input of co-processing materials (Co-M) produced by fermentation caused formation of polychlorinated dibenzo-p-dioxins and dibenzofuran (PCDD/Fs) in the bypass flue gas (By-gas) in excess of the regulatory standard. The Co-M input produced by the screening and gasifier technologies caused the total organic carbon (TOC) concentration to exceed the standard. In addition, the NO_x, TOC, and PCDD/Fs in the By-gas exceeded the regulatory standard. Raw meal was the primary chlorine and heavy metals input stream, and clinker (CK) and cement kiln dust (CKD) accounted for>90% of the total chlorine output stream. Flue gas and CKD were the primary volatile heavy metal (Hg) output streams. Greater than 70% of the semi-volatile heavy metals (Cd, Pb, Tl and Se) distributed in hot raw meal and bypass cement kiln dust. The low-volatility heavy metals were concentrated in the CK. These results indicated that co-processing techniques used in China still require improvement.     

COUNTERMEASURES AGAINST LANDSLIDE GEOLOGICAL DISASTERS IN TIBET

Ｔｈｅｄｅｖｅｌｏｐｍｅｎｔａｎｄｄｉｓｔｒｉｂｕｔｉｏｎｏｆｌａｎｄｓｌｉｄｅｓ　Ｔｉｂｅｔ,ｔｈｅｍａｉｎｂｏｄｙｏｆｔｈｅＱｉｎｇｈａｉ ＸｉｚａｎｇＰｌａｔｅａｕ ,ｉｓｏｆｔｅｎｃａｌｌｅｄ“ｔｈｅｒｉｄｇｅｏｆｔｈｅｒｏｏｆｏｆｔｈｅｗｏｒｌｄ” .Ｉｔｈａｓａｂｒｏａｄｔｅｒｒｉｔｏｒｙａｎｄｖｅｒｙｃｏｍｐｌｅｘａｎｄｄｉｖｅｒｓｉｆｉｅｄｌａｎｄｆｏｒｍｓ,ｗｉｔｈａｎａｖｅｒａｇｅａｌｔｉｔｕｄｅｏｆｏｖｅｒ 4 0 0 0ｍ .Ｔｈｅｃｌｉｍａｔｅｉｓｓｐｅｃｉａｌｈｅｒｅ,ｖａｒｙｉｎｇｄ…     

基于生命周期评价的氮肥温室气体排放研究

采用生命周期评价方法研究硝酸铵、磷酸二铵、复合肥、尿素、碳酸氢铵5种不同含氮量的氮肥温室气体排放,为碳足迹标识评价提供借鉴和数据基础。分析优选有利于控制温室气体排放的氮肥种类。生命周期温室气体排放评价结果表明:硝酸铵6.3543kg CO2eq/kg,磷酸二铵14%含氮率和17%含氮率分别为2.4416kg CO2eq/kg、2.7792kg CO2eq/kg,复合肥7%含氮率和13%含氮率分别为1.9721kg CO2eq/kg、2.6473kg CO2eq/kg,尿素9.2627kg CO2eq/kg,碳酸氢铵4.0132kg CO2eq/kg;相同含氮量情况下,磷酸二铵生命周期温室气体排放相对较少,是控制氮肥生命周期温室气体排放的最优选对象。     

钻井工程安全技术与岗位安全操作规程

地质钻井工程作业属高度流动分散的艰苦行业,其工作条件多变、环境恶劣、危险程度较高。因此,加强钻探工人、钻井机长、班长的安全教育培训,提高从业人员的安全知识与技能,努力改善工作环境,把事故的风险降到最低点是一项长期性的工作任务。     

EBZ160 掘进机常见故障分析

本文在机械方面、液压方面分析了EBZ160掘进机的常见故障,为进一步研究掘进机提供了帮助。