基于两种再分析资料的一次四川盆地大气污染过程气象要素数值模拟研究

利用ECMWF-ERA5和NCEP-FNL再分析资料作为中尺度气象模式WRF(The Weather Research and Forecasting)初始场,对四川盆地2018年1月一次大气污染过程气象要素进行了模拟,对比分析了气温、风速、风向、相对湿度、边界层高度、温廓线的模拟效果,并结合大气超级站观测数据对模拟结果进行评估.结果表明:两种资料均能较好地模拟出气象要素的变化情况,但由于两套资料时空分辨率、采用的模式、同化方案、数据来源和质量控制方案存在一定区别,导致各要素模拟效果并不一致.与NCEP-FNL相比,ECMWF-ERA5模拟的平均相对湿度(59.23%)与观测值差异更小,且均方根误差、偏差较小,分别为9.83%和-0.83%,但NCEP-FNL模拟的平均气温(8.99℃)更接近观测值,且偏差值较小,为-0.04℃.两组模拟结果均显示盆地内部为模拟区域的低风速区,相对湿度模拟值在60%以上,气温高于西部山地地区.NCEP-FNL模拟的盆地内部气温、相对湿度、风速小于ECMWF-ERA5模拟值,但边界层高度模拟值较大.ECMWF-ERA5模拟的逆温强度相比较小,且温度露点差...     

水质监测频率与极端气候对高原湖泊入湖河流氮磷通量估算的影响

河流是流域氮磷营养盐的主要输出途径之一,准确掌握其通量变化和驱动因素对流域营养盐管理具有重要意义.本研究以滇池主要入湖河流宝象河为例,基于周水质观测数据和逐日水量数据,构建了河流氮磷通量LOADSET模型.估算了宝象河不同时间尺度(日、季、年)TN和TP的通量,评估了4种低频水质采样和极端气候指数对河流氮磷通量计算的影响.结果表明:(1)2018年宝象河的TN和TP年通量分别为270.49 t和11.19 t,存在显著的年内差异,夏季是通量最高的季节,分别占TN和TP年通量的40.78%和41.96%.(2)基于LOADEST模型的低频水质采样的氮磷估算结果与高频采样差异较小,宝象河TN、TP通量估算受采样频率影响较小.(3)宝象河的TN和TP通量变化受连续5日最大降水量、平均最低气温、平均最高气温、最低气温、最低气温极大值、最高气温极小值和平均温差7种极端气候指数的显著影响.     

涂料制造行业挥发性有机物排放成分谱及影响

采用不锈钢采样罐对华东地区8家涂料制造企业生产车间排口进行采集,运用气相色谱-质谱联用技术(GC-MS)测定了106种VOCs组分,识别了VOCs排放特征,建立了溶剂型涂料和水性涂料VOCs排放成分谱,分析了VOCs对臭氧生成的贡献.结果表明,涂料制造行业VOCs特征组分主要为芳香烃和含氧烃,两者浓度范围在65.5%～99.9%,溶剂型涂料VOCs排放主要以芳香烃为主,占总VOCs的63.0%～94.0%;水性涂料VOCs排放主要以含氧烃为主,占总VOCs的54.5%～99.9%.间/对-二甲苯(32.4%)、乙苯(19.0%)和乙酸乙酯(12.1%)为溶剂型涂料源排放特征,乙酸乙酯(83.7%)与2-丁酮(8.0%)为水性涂料源排放特征.芳香烃和含氧烃是涂料制造行业的主要活性组分,对臭氧生成潜势(OFP)的总贡献率在92.9%～99.9%之间.源反应活性分析(SR)表明,水性涂料单位质量VOCs对臭氧的生成贡献低于溶剂型涂料,因此可显著降低臭氧的生成潜势.研究显示,针对涂料制造行业VOCs污染治理,应重点关注芳香烃和含氧烃中对臭氧生成潜势贡献较大的VOCs组分,进行源头和精细化控制.     

新乡市夏冬季节PM2.5稳定碳同位素特征分析

为了探究新乡市PM_2.5中δ¹³C比值的季节性变化特征及其对污染来源的指示作用,于2017年夏冬季节采集PM_2.5有效样品91个,并测定了样品中的总碳、水溶性离子和稳定碳同位素比值(δ¹³C).夏季和冬季的TC浓度平均值分别为11.78μg·m^-3和26.6μg·m^-3.夏季δ¹³C比值为-27.70‰～-25.22‰其中前14 d的δ¹³C比值波动较大平均值为-26.96‰,而后16d的δ¹³C比值相对稳定,平均值为-25.69‰,而且前半月和后半月火点数具有较大差异同时K_nss⁺浓度与TC质量浓度显著相关(R²=0.62,P<0.01)这说明夏收季节生物质燃烧可能对δ¹³C比值有显著影响.新乡地区冬季RH与TC/PM₂₅质量比值的显著负相关(R²=0....     

扩散电化学法现场测定高湿度烟气中低浓度二氧化硫能力的 研究

根据目前定电位电解法出现的问题,对扩散电化学法测定固定污染源高湿度烟气中低浓度二氧化硫的能力展开研究。结果显示,扩散电化学法测定值与参比值保持较好的一致性,说明该方法不受固定污染源烟气浓度、湿度以及负压等因素的影响,对高湿烟气中低浓度二氧化硫具备较强测定能力,非常适合该状况下SO₂的现场测定。但是方法也受传感器制约,适用范围受到限制。     

Optimization of low-temperature drying of laying-hen manure using response surface methodology

ABSTRACT

Manure-drying system using exhausted air from laying hen houses or ambient air has been extensively used in China to dewater the manure for easy transportation and to reduce pathogen levels prior to land application. Due to the climate influence or inappropriate setting of technological parameters, there are some issues in this manure-drying system, such as low dehydration rate, high energy consumption, and high ammonia emission. A purpose-designed experimental drying apparatus was set up to simulate the commercial manure drying system. Drying experiments were carried out to assess the impacts of hot air temperature (15–35°C), air velocity (0.6–1.8 m/s) and manure layer thickness (60–140 mm) on fan’s energy consumption, dehydration rate, and nitrogen loss rate. The response surface analysis method and sub-stepping method was used to analyze the relationships between the response variables and the influence factors. The drying curves were drawn, and the quadratic regression mathematical models that described the relations between the experimental indices and the influence factors were established. The optimal combination of technological parameters for drying laying-hen manure was obtained through conducting a multi-objective function optimization by function-expected optimization. The optimal parameters are as follows: hot air temperature of 35°C, air velocity of 1.60 m/s, and manure layer thickness of 85 mm. The results also indicate that raising the hot air temperature increased the value of synthesis objective function when the hot air temperature was in 26–35°C. The results can provide a theoretical basis for low-temperature drying of laying-hen manure in actual production.

Implications: A large amount of poultry manure is produced yearly in China, which has become a tremendous pressure on the environment when it cannot be utilized as resources. A more sustainable solution using the residual heat from the poultry house ventilation or ambient hot air has been widely used in China. This drying method can significantly reduce energy consumption compared to the traditional way. However, due to the influence of climate or inappropriate setting of technological parameters, issues such as high energy consumption and high ammonia emission still exist in this method. It is necessary to optimize the low-temperature drying process of laying-hen manure, to reduce energy consumption and nitrogen loss rate.     

Antibiotic contamination in a typical water-rich city in southeast China: a concern for drinking water resource safety

Abstract

The occurrence and distribution in the aquatic environment of Nanjing of 49 antibiotics from seven therapeutic classes were investigated using an improved analytical method developed for multiclass target analysis. The results showed that these antibiotics are widely present in the water bodies of this city, with a total concentration of up to 1.958?μg L^?1. The most abundant class was tetracyclines, contributing 43.7% to the total antibiotic burden. Lincomycin was detected in all samples, and the detection rate of clindamycin was 90.5%. An exploratory analysis of the data points was performed by unsupervised pattern recognition (hierarchical cluster analysis, HCA) in an attempt to clarify the pollution level in different sampling areas, and robust cluster solutions grouped the data according to their different antibiotic contaminant profiles. The safety of drinking water resources was emphasized, and the rivers, as the main receiving water body for treated and untreated wastewater in this city, were more seriously contaminated than the surrounding lakes and reservoir, not only in concentration but also in detection frequency, in our study as well as in similar research studies. A correlation analysis between the presence of antibiotics and the environmental factors was conducted, and it was found that antibiotic contamination and water quality were closely connected; the better the water quality, the lower the antibiotic contamination. Positive correlations existed between the antibiotics and tested heavy metals, as well as between antibiotics and boron and arsenic. However, whether these correlations resulted from their reaction or a common source was difficult to determine, and the mechanism requires further exploration.     

Pathways regulating nitrogen removal in constructed ditch wetlands: effects of different inflow ratios and artificial aeration

Environmental Science and Pollution Research - Constructed ditch wetland (CDW) is a combination of idle ditch and constructed wetland, which is typically used in rural areas to remove pollutants...     

Effect of first-stage aeration on treatment of domestic sewage in different hybrid constructed wetlands

Environmental Science and Pollution Research - Two sets of hybrid constructed wetlands (HCWs) with the first-stage aeration were used to treat actual domestic sewage in this paper, where the...     

Enrichment and characterization of an effective hexavalent chromium-reducing microbial community YEM001

Environmental Science and Pollution Research - Chromium (Cr) is one of the most widely used heavy metals in industrial processes, resulting in water and soil pollution that seriously threaten...