Mg3MnxAl1-xCO3类水滑石衍生NSR催化剂的制备及其性能评价

采用共沉淀法合成了三元类水滑石Mg_3Mn_xAl_(1-x)CO_3,通过高温煅烧得到其衍生氧化物Mg_3Mn_xAl_(1-x)O_m,再经浸渍负载Pt或BaO后制得新型NO_x存储/再还原(NSR)催化剂。XRD及SEM表征结果显示,当Mn与Al的摩尔比(Mn/Al)大于1时所制备的Mg_3Mn_xAl_(1-x)O_m有杂晶相出现且发生团聚,结合NO_x存储性能评价结果,确定最优Mn/Al为1。BaO负载不利于NO_x的存储,而当Pt负载量为1%(w)时NO_x存储性能最优,250℃条件下的存储量由负载前的0.52 mmol/g提升至0.61 mmol/g。CO_2与NO_x之间存在较强的竞争吸附。负载1%Pt催化剂的NSR性能评价结果表明,8个稀燃-富燃循环后NO_x的去除率为68%,表明催化剂的还原性能仍需加强。     

磁性生物炭负载Mg-Fe水滑石的制备及其吸附水中Cd（Ⅱ）和Ni（Ⅱ）的性能

合成了一种高吸附容量的磁性生物炭负载Mg-Fe水滑石复合材料（L-BC）,并用于去除水中的Cd²⁺和Ni²⁺。表征结果表明,采用浸渍联合热解法成功制备了磁性生物炭（M-BC）,水热合成法成功地将Mg-Fe水滑石负载在M-BC上。动力学研究结果表明,Cd²⁺和Ni²⁺吸附符合伪二级动力学模型,化学吸附为速率控制步骤。等温吸附研究结果表明,L-BC对Cd²⁺和Ni²⁺的吸附符合Langmuir模型,为单分子层化学吸附,最大吸附量分别为263.156 mg/g和43.291 mg/g。吸附机理主要为Mg-Fe水滑石层间CO₃^2-和表面羟基与Cd²⁺和Ni²⁺产生表面共沉淀。L-BC具有良好的吸附和重复利用性能,是一种很有前景的去除Cd²⁺和Ni²⁺的吸附材料。     

水质凯氏氮标准样品的研究

提出了水质凯氏氮标准样品的研究方法。在研究过程中，完成了样品的配制、均匀性、稳定性等工作。经过多家实验室协作定值，确定了样品的标准值及不确定度，并提供使用。     

负载TiO2浮石对污水处理厂二沉池出水的矿化与灭菌研究

城市污水处理厂第二沉淀池出水的污染物浓度较低,经过矿化及灭菌等深度处理后可以回用,从而减轻对淡水资源的需求。本实验采用溶胶-凝胶法制备了负载TiO2的浮石光催化剂,对城市污水处理厂第二沉淀池出水进行了矿化及灭菌处理研究。采用低压汞灯对处理水样照射2h,有机物降解率可以达到50％,灭菌效率达到100％。处理后的水可以作为农作物灌溉、城市绿化和娱乐用水。负载在浮石表面的TiO2薄膜经过10次的光催化循环实验后,没有明显破损,可以再次循环使用。TiO2浮石具有质轻、机械性能好和价格低等优点,该方法处理废水的适用浓度低,可以广泛应用于微污染水和城市污水处理厂出水的深度处理。     

A highly resolved temporal and spatial air pollutant emission inventory for the Pearl River Delta region, China and its uncertainty assessment

A highly resolved temporal and spatial Pearl River Delta (PRD) regional emission inventory for the year 2006 was developed with the use of best available domestic emission factors and activity data. The inventory covers major emission sources in the region and a bottom–up approach was adopted to compile the inventory for those sources where possible. The results show that the estimates for SO₂, NO_x, CO, PM₁₀, PM_2.5 and VOC emissions in the PRD region for the year 2006 are 711.4 kt, 891.9 kt, 3840.6 kt, 418.4 kt, 204.6 kt, and 1180.1 kt, respectively. About 91.4% of SO₂ emissions were from power plant and industrial sources, and 87.2% of NO_x emissions were from power plant and mobile sources. The industrial, mobile and power plant sources are major contributors to PM₁₀ and PM_2.5 emissions, accounting for 97.7% of the total PM₁₀ and 97.2% of PM_2.5 emissions, respectively. Mobile, biogenic and VOC product-related sources are responsible for 90.5% of the total VOC emissions. The emissions are spatially allocated onto grid cells with a resolution of 3 km × 3 km, showing that anthropogenic air pollutant emissions are mainly distributed over PRD central-southern city cluster areas. The preliminary temporal profiles were established for the power plant, industrial and on-road mobile sources. There is relatively low uncertainty in SO₂ emission estimates with a range of −16% to +21% from power plant sources, medium to high uncertainty for the NO_x emissions, and high uncertainties in the VOC, PM_2.5, PM₁₀ and CO emissions.     

降低FCC再生烟气NOx排放助剂的实验室评价

通过采用ACE装置与烟气NOx分析仪器联用的实验室评价方法,可在更接近实际催化裂化反应-再生过程的条件下,评价助剂对再生烟气中NOx的催化转化性能,同时还可考察助剂的加入对催化裂化产品分布的影响。采用该方法对几种降NOx助剂的性能进行了评价,结果表明,在催化剂体系中含有Pt基CO助燃剂的情况下,加入4％的RDNO;助剂后,烟气NOx降低幅度约30％～40％,且催化裂化产品分布基本不受影响。     

碱激发胶凝材料及其固化Pb^2＋的试验研究

对碱激胶凝材料（碱-偏高岭土、碱-矿渣和碱-粉煤灰）与水-水泥体系固化Ph^2＋进行了试验研究,其中水-水泥体系为对比样。结果表明：对于相同稠度的碱激发胶凝材料,即使Pb^2＋含量达到2．4％,除了碱-粉煤灰的抗压强度略低外,其他都达到30MPa以上,满足填埋或做建筑基材的使用要求;与水泥相比,碱激发胶凝材料能显著降低重金属离子（Ph^2＋）浸出浓度,其规律性与其NH4交换容量大小的规律性一致,与其固化体的抗压强度的大小没有相关性。     

Characterization of PM2.5-bound polycyclic aromatic hydrocarbons in Atlanta—Seasonal variations at urban,suburban, and rural ambient air monitoring sites

Twenty-eight polycyclic aromatic hydrocarbons (PAH) and methylated PAHs (Me-PAH) were measured in daily PM_2.5 samples collected at an urban site, a suburban site, and a rural site in and near Atlanta during 2004 (5 samples/month/site). The suburban site, located near a major highway, had higher PM_2.5-bound PAH concentrations than did the urban site, and the rural site had the lowest PAH levels. Monthly variations are described for concentrations of total PAHs (∑PAHs) and individual PAHs. PAH concentrations were much higher in cold months than in warm months, with average monthly ∑PAH concentrations at the urban and suburban-highway monitoring sites ranging from 2.12 to 6.85 ng m^?3 during January–February and November–December 2004, compared to 0.38–0.98 ng m^?3 during May–September 2004. ∑PAH concentrations were found to be well correlated with PM_2.5 and organic carbon (OC) within seasons, and the fractions of PAHs in PM_2.5 and OC were higher in winter than in summer. Methyl phenanthrenes were present at higher levels than their un-substituted homologue (phenanthrene), suggesting a petrogenic (unburned petroleum products) input. Retene, a proposed tracer for biomass burning, peaked in March, the month with the highest acreage and frequency of prescribed burning and unplanned fires, and in December, during the high residential wood-burning season, indicating that retene might be a good marker for burning of all biomass materials. In contrast, potassium peaked only in December, indicating that it might be a more specific tracer for wood-burning.     

氧化亚铁硫杆菌浸出废弃线路板中铜的研究

对废弃线路板中的铜进行了细菌浸出、只有硫酸亚铁环境下的浸出及酸浸出实验,研究了不同条件对比浸出效果,研究结果表明,细菌浸出比只有硫酸亚铁存在的浸出和酸浸要快得多。研究了在线路板粉末浓度12、24、40、60和120 g/L下浸出速率的变化,结果表明, 在考察范围内,浸出速度随着加入的废弃线路板粉末浓度的升高而降低,当线路板粉末的浓度＞60 g/L时,浸出速度维持在较低水平,选取24 g/L作为浸出的线路板粉末的浓度。分别在细菌培养0、24、48和72 h时加入线路板粉末24 g/L进行浸出实验,结果表明,细菌培养时间长,使得浸出过程进行得也更快。     

蜂窝煤燃烧氟污染的控制

以碳酸钙为固氟添加剂,以炉渣及粉煤灰等低氟材料取代全部或部分粘土作为粘结剂来制作蜂窝煤,进行了燃煤降氟的试验研究.结果表明,添加碳酸钙能有效降低蜂窝煤燃烧时候的氟排放,当煤:粘土:CaCO3的质量比为70:17:13时,碳酸钙的固氟效果最佳,氟的排放率可降低64.1%.以炉渣为粘结剂制作蜂窝煤能够显著降低燃烧时向外界排放的氟化物量,当煤:炉渣:CaCO3为80:8:12时,蜂窝煤燃烧排氟量较小且趋于稳定.已拌有一定剂量粉煤灰粘结剂的煤中添加15%的粘土后碳酸钙的固氟效果明显改善,当煤:粘土:粉煤灰:CaCO3为70:15:9:6时固氟效果最佳,此时蜂窝煤氟逸出率仅为18.2%,氟的减排率达到77.9%,显著优于未添加粘土时碳酸钙的固氟效果,蜂窝煤添加碳酸钙固氟剂进行高效固氟时,需同时适当增加粉煤灰加入量,以稳定固氟剂的高温固氟效果.