连续式自清洁蓝藻收集设备的中试研究

近年来湖泊富营养化日益加重,各种除藻技术层出不穷,以机械捞藻法、滤网式收集法、排气分离式收集法等为代表的蓝藻收集方法迅速出现。为了进一步提高蓝藻的收集效率,开发了一种新型的连续式自清洁蓝藻收集设备,以叶绿素a含量为主要指标,判断蓝藻去除效果。在进水泵频率30 Hz,进水压力0.11 MPa的条件下,每间隔30 min洗...     

Human hair as a potential biomonitor for assessing persistent organic pollutants

To explore human biomonitor of persistent organic pollutants (POP) for public health risk assessment, extractable organohalogens (EOX), extractable persistent organohalogens (EPOX) and some selected organochlorine pesticides (OCP) and polychlorinated biphenyls (PCB) in children hair from urban and rural regions of Beijing, China, were measured by instrumental neutron activation analysis (INAA) and gas chromatography-electron capture detector (GC-ECD). The results indicated that about 96% of the total halogens existed as water-soluble polar compounds; about 25 to 50% of EOX were sulfuric acid-resistant EPOX; organochlorines were the major fraction of the organohalogens; and 88 to 99.6% of extractable persistent organochlorines (EPOCl) cannot be attributed to the selected OCP and PCB. HCH, DDT and 2-5CB were the major contributors to hair OCP and PCB. Further, gamma-HCH, p,p'-DDE, p,p'-DDT and PCB-52 were the predominant individuals of HCH, DDT and 2-5CB, respectively. The concentration distributions of EPOCl, HCH, DDT and PCB in children hair were generally in the order of urban>rural and girls>boys, except for PCB congeners with random distributions between genders. Pearson positive correlations between hair lipid and the detected parameters of hair gamma-HCH (p<0.01), DDT (p<0.01), EOCl (p<0.05), as well as EPOCl (p<0.05) were observed. Also, the ratios of hair alpha/gamma and p,p'-DDE/p,p'-DDT suggested that fresh input of HCH and DDT might exist in Beijing area. Hair can reflect body's integral exposure to POP from endogenous and exogenous sources, which, thus, can be used as a potential biomonitor in assessing POP exposure for public health purposes.     

酚类化合物抑制斜生栅藻生长的毒性效应

本文运用评价化学品对藻类毒性的标准实验方法,得出苯酚,邻氯苯酚、２,４－二氯苯酚和五氯酚抑制斜生栅藻生长的９６ｈ－ＥＣ５０分别为３４１．８５,２５和１．５ｍｇ·１＾－１,实验结果表明,在３００,３５０和４００ｍｇ·ｌ＾－１三种本酚初始浓度下,斜生栅藻都不具备降解苯酚的能力,即使在培养基中基本没有无机碳源的情况下,斜生栅藻仍不具备降解苯酚的能力。     

Use of waste ash from palm oil industry in concrete

Palm oil fuel ash (POFA), a by-product from the palm oil industry, is disposed of as waste in landfills. In this study, POFA was utilized as a pozzolan in concrete. The original size POFA (termed OP) was ground until the median particle sizes were 15.9 microm (termed MP) and 7.4 microm (termed SP). Portland cement Type I was replaced by OP, MP, and SP of 10%, 20%, 30%, and 40% by weight of binder. The properties of concrete, such as setting time, compressive strength, and expansion due to magnesium sulfate attack were investigated. The results revealed that the use of POFA in concretes caused delay in both initial and final setting times, depending on the fineness and degree of replacement of POFA. The compressive strength of concrete containing OP was much lower than that of Portland cement Type I concrete. Thus, OP is not suitable to be used as a pozzolanic material in concrete. However, the replacement of Portland cement Type I by 10% of MP and 20% of SP gave the compressive strengths of concrete at 90 days higher than that of concrete made from Portland cement Type I. After being immersed in 5% of magnesium sulfate solution for 364 days, the concrete bar mixed with 30% of SP had the same expansion level as that of the concrete bar made from Portland cement Type V. The above results suggest that ground POFA is an excellent pozzolanic material and can be used as a cement replacement in concrete. It is recommended that the optimum replacement levels of Portland cement Type I by MP and SP are 20% and 30%, respectively.     

生活垃圾可持续化填埋

通过对中国填埋场现状分析,提出了"可持续填理"的概念.认为生活垃圾填埋场将从单纯的最终处置场所演变为填埋与中转相结合的场所.填埋场的可持续发展也将从两方面得到体现:一为垃圾降解过程及其副产品处理中以能量形式得到利用,另一方面为稳定化后的垃圾及填埋场本身空间得到再一次的利用.     

玉米淀粉废水的处理技术

本文介绍玉米淀粉废水的特性,废水处理工艺路线,工艺设计中应着重考虑的问题及设计参数的选择。     

Conversion relationship between groundwater and surface water in the Taizi River Basin in China based on geochemical and isotopic characteristics

Environmental Science and Pollution Research - Stable isotopes (δDVSMOW and δ18OVSMOW) and hydrochemical characteristics were analyzed to determine the groundwater and surface water...     

A comparative study of abiological granular sludge (ABGS) formation in different processes for zinc removal from wastewater

Abiological granular sludge (ABGS) formation is a potential and facile strategy for improving sludge settling performance during zinc removal from wastewater using chemical precipitation. In this study, the effect of pH, seed dosage, and flocculant dosage on ABGS formation and treated water quality was investigated. Results show that settling velocity of ABGS can reach up to 4.00 cm/s under optimal conditions, e.g., pH of 9.0, zinc oxide (ZnO) seeds dosage of 1.5 g/l, and polyacrylamide (PAM) dosage of 10 mg/l. More importantly, ABGS formation mechanism was investigated in NaOH precipitation process and compared with that in bio-polymer ferric sulfate (BPFS)–NaOH precipitation process regarding their sludge structure and composition. In the NaOH precipitation process, ABGS formation depends on some attractions between particles, such as van der Waals attraction and bridging attraction. However, during the BPFS–NaOH sludge formation process, steric repulsion becomes dominant due to the adsorption of BPFS on ZnO seeds. This repulsion further causes extremely loose structure and poor settling performance of BPFS–NaOH sludge.     

Study on the optical property and surface morphology of N doped TiO2 film deposited with different N2 flow rates by DCPMS

N doped TiO₂ films were deposited by direct current pulse magnetron sputtering system at room temperature. By using UV-Vis spectrophotometer and atomic force microscope, we studied the influence of N₂ flow rate on the optical property and surface morphology of films. The results indicate that the optical property and surface morphology of N doped TiO₂ film was dominated by the N₂ flow rate. The mean absorbency in visible range of pure TiO₂ films is near to 0%, which means that the pure TiO₂ could hardly display the photocatalytic property in visible range. When N₂ flow rate is 2 sccm, the mean absorbency in visible range of N doped TiO₂ film could reach at 24%. In this case, the film could be used as photocatalyst induced by visible light. While with increasing N₂ flow rate, the mean absorbency in visible range of N doped TiO₂ film decreased abruptly. Especially when N₂ flow rate exceeded 8 sccm, the mean absorbency in visible range of N doped TiO₂ film decreased to about 0%, which is like pure TiO₂ fimls.