含铝酸性农药废水合成聚合硫酸铝混凝剂

采用农药三唑醇生产过程中产生的含铝酸性废水为原料,合成了聚合硫酸铝(PAS)液体混凝剂,并用于厂区污水站好氧池出水的混凝处理。考察了碱化剂用量、聚合温度、聚合时间等合成条件及PAS加入量、混凝pH等混凝条件对混凝效果的影响,并比较了PAS与商售聚合氯化铝(PAC)的混凝效果。实验结果表明:在n(碱化剂)∶n(硫酸铝)为2.1∶1、聚合温度为80℃、聚合时间为60 min的条件下,所得PAS液体混凝剂产品的w(Al2O3)为7.8%~9.0%,盐基度为45%~60%,pH为3.5~4.0,产量为0.75 t/t(以废水计);在PAS加入量为2.0 m L/L、混凝pH为10.0时,COD和SS的去除率则分别达到14.6%和83.0%;该PAS可替代厂区常规使用的商售PAC,日节约废水处理成本5 922元。     

水坝建设影响下澜沧江中游沉积物重金属形态分析及污染指数研究

采集了漫湾库区和大朝山库区25个采样断面的沉积物样品.每个库区均从上游到下游分为河流区、过渡区和湖泊区,研究了沉积物中As、Cd、Cr、Cu、Mn、Ni、Pb、Zn元素的含量和赋存形态差异,利用次生相与原生相分布比值法(RSP)分析重金属元素的污染水平.结果表明,各库区从上游到下游沉积物中的重金属元素和碳氮元素均呈现出增加的趋势,而沉积物的中值粒径呈现出减小的趋势.漫湾库区的As、Cd、Zn元素平均含量均高于大朝山库区;大朝山库区的Cr、Mn、Ni、Pb元素平均含量均高于漫湾库区.在重金属赋存形态中,Cd和Mn元素以可交换态和残渣态为主;Cu、Pb以有机质态和残渣态为主;其余重金属元素均以残渣态为主.沉积物中的可交换态在有机碳的络合作用下转化成有机质态.在水坝建设的影响下沉积物中细颗粒和有机质含量明显上升,重金属在细颗粒物和有机质的共同作用下蓄积于坝前的沉积物中.PSR分析结果表明,在水坝运行影响下,各库区湖泊区和过渡区的污染水平均高于河流区.其中,Cd元素所有地区处于重度污染水平;Mn和Pb大部分区域处于中度污染水平;Cu元素大部分区域处于轻度污染水平;其余元素基本无污染.     

我国大陆地区电器电子产品报废量预测研究

随着我国电器电子产品的报废量不断增长,准确预测报废量及其分布对回收网络体系规划研究十分关键.本文利用Gompertz模型及保有量系数法对我国电器电子产品报废量进行建模,在验证预测模型及结果准确性的前提下,对全国31个省2003—2020年电视机、电冰箱、洗衣机、空调及电脑的报废量进行预测,并对5种家用电器报废总量构成、时间序列及空间分布进行分析.结果表明,到2020年,我国5种家用电器报废量将达到20.3亿台,广东省以1794万台报废量列居全国首位,上海市以1083台·km~(-2)的报废密度列居首位;按现有回收处理规模,2014年全国仍存在103万t待处理缺口.最后对废旧电器电子产品拆解处理产能布局提出了合理化建议,为我国的家用电器回收网络规划提供参考.     

The local bird trade and its conservation impacts in the city of Guiyang,Southwest China

Regional Environmental Change - China has a history and reputation of substantial exploitation of wildlife, and the harvest and trade of wild birds are common throughout the country, both for...     

The production of sexual and asexual larvae within single broods of the scleractinian coral, Pocillopora damicornis

The genotypic compositions of two populations of the brooding coral, Pocillopora damicornis, were studied by exhaustive sampling of adult colonies on a fine scale in southern Taiwan. In addition, 100 larvae were randomly selected among more than 1,000 brooded larvae collected from a single broodparent within each population. Using 7 polymorphic microsatellite markers, both populations were found to be highly clonal, and 7 clonal lineages were characterized. One clonal lineage (C1) dominated both study areas and comprises 54.9% of all colonies sampled, while any of the other 6 clonal lineages represented no more than 5%. Among the 100 larvae randomly selected for genotyping from each broodparent, the extent of clonal reproduction was high, and only 29 and 6 larvae, respectively, were found to be genotypically different from their broodparent. Among the 35 genotypically distinct larvae, 33 were thought to be derived from sexual reproduction, and 2 were assumed to be clonal propagules that had undergone somatic mutations. Two genotypically identical larvae were also found in one of the 2 sexually derived larva arrays, indicating the possible existence of polyembryony. The high proportions of clonality in both adult colonies and brooded larvae suggest that asexually produced larvae might significantly contribute to the recruitment of local populations. The dense clonal population of P. damicornis in the study area favors the quick recolonization view of clonal propagules after disturbances.     

Expansion of Urban Space and Land Use Control in the Process of Urbanization: an Overview

Urban expansion brought by the rapid progress of urbanization has caused many problems in China. It is a significant issue to evaluate the extent of urban expansion and to make appropriate controls over the sprawl of urban areas. With a comparative study of international experiences, this article analyzed the mechanism and consequences of urban expansion, reviewed the typical planning and financial policies adopted by other countries for controlling urban sprawl, and discussed the suitable densities of urba...     

氚钛靶放射源在离子迁移气相色谱仪中的应用及其电离辐射环境影响分析

本文以成都科亿达自动化工程有限公司气象色谱实验室GC-2000离子迁移气相色谱仪为例,简要分析了氚钛靶放射源在气象色谱实验中的应用,并通过监测数据分析其电离辐射环境影响.     

起重机械作业人员职业适性检测指标研究

采用Ｄｅｌｐｈｉ法对起重机械作业人员职业适性指标进行了研究。咨询专家就各备择指标对工作重要性及发生事故的关系进行了评估。结果表明：专家积极程度与意见集中程度良好；事故重要性与工作重要性排序一致性良好，两者呈高度正相关。依据专家对“重要性”的排序，再通过专家会议与现场考证等方法，最终确定了起重机械作业人员职业适性检测指标体系。