Metabolic uncoupler, 3,3′,4′,5-tetrachlorosalicylanilide addition for sludge reduction and fouling control in a gravity-driven membrane bioreactor

• Effects of metabolic uncoupler TCS on the performances of GDMBR were evaluated. • Sludge EPS reduced and transformed into dissolved SMP when TCS was added. • Appropriate TCS increased the permeability and reduced cake layer fouling. • High dosage aggravated fouling due to compact cake layer with low bio-activity. The gravity-driven membrane bioreactor (MBR)system is promising for decentralized sewage treatment because of its low energy consumption and maintenance requirements. However, the growing sludge not only increases membrane fouling, but also augments operational complexities (sludge discharge). We added the metabolic uncoupler 3,3′,4′,5-tetrachlorosalicylanilide (TCS) to the system to deal with the mentioned issues. Based on the results, TCS addition effectively decreased sludge ATP and sludge yield (reduced by 50%). Extracellular polymeric substances (EPS; proteins and polysaccharides) decreased with the addition of TCS and were transformed into dissolved soluble microbial products (SMPs) in the bulk solution, leading to the break of sludge flocs into small fragments. Permeability was increased by more than two times, reaching 60–70 L/m²/h bar when 10–30 mg/L TCS were added, because of the reduced suspended sludge and the formation of a thin cake layer with low EPS levels. Resistance analyses confirmed that appropriate dosages of TCS primarily decreased the cake layer and hydraulically reversible resistances. Permeability decreased at high dosage (50 mg/L) due to the release of excess sludge fragments and SMP into the supernatant, with a thin but more compact fouling layer with low bioactivity developing on the membrane surface, causing higher cake layer and pore blocking resistances. Our study provides a fundamental understanding of how a metabolic uncoupler affects the sludge and bio-fouling layers at different dosages, with practical relevance for in situ sludge reduction and membrane fouling alleviation in MBR systems.     

Functional wastepaper-montmorillonite composite aerogel for Cd2+ adsorption

Environmental Science and Pollution Research - In this study, a composite aerogel (WP-MMT) composed of wastepaper (WP) and montmorillonite (MMT) was prepared by ambient pressure drying technology...     

N2O profiles in the enhanced CANON process via long-term N2H4 addition: minimized N2O production and the influence of exogenous N2H4 on N2O sources

Environmental Science and Pollution Research - Production of the greenhouse gas nitrous oxide (N2O) from the completely autotrophic nitrogen removal over nitrite (CANON) process is of growing...     

基于灾害风险评估的山地城市固定避难场所布局优化研究——以东川区为例

研究以各区域灾害风险评估系数作为权重系数,对山地小城市各区域避难场所进行优化布局。首先,通过风险值=危险性*脆弱性/抗灾救灾能力机理表达式构建灾害风险评估指标体系,并以模糊综合评价法得出灾害风险评估数值,在此基础上通过多目标选址优化模型来构建山地城市避难场所的优化模型,其中灾害风险评估系数作为影响布局的权重因素纳入其中。最后,以东川区为研究对象,对其固定避难场所进行优化布局研究,结果表明:东川区城区固定避灾场所数量可在接近最优解的情况下达到效果最优。     

A5000型换流阀晶闸管击穿故障处理方案优化

晶闸管击穿故障为换流阀常见故障之一,现有±800 kV特高压换流站A5000型换流阀晶闸管击穿故障处理方案存在耗时不稳定、处理环节复杂等问题,进而造成换流阀停电时间延长,影响直流输电系统功率输送能力,针对A5000型换流阀晶闸管击穿故障处理方案进行优化,提高了该型号换流阀晶闸管击穿故障的处理效率,缩短了换流阀停电时间,可进一步保障直流输电系统功率输送能力。     

气相色谱法直接测定水中微量有机胺

用配有氢火焰离子化检测器（FID）的气相色谱仪直接测定水中多种微量有机胺。试样经过滤后直接进样,在气相色谱仪上使用CP7448毛细管柱,用外标法测定水中微量甲胺、二甲胺、一乙胺、二乙胺的含量。在所选择的色谱操作条件下,甲胺、二甲胺、一乙胺、二乙胺的质量浓度分别在一定范围内与峰面积呈良好的线性关系。4种组分的回收率分别为96.7％,99．0％,101．2％,99．2％;精密度分别为4．3％,3．7％,5．5％,3．1％;检出限分别为2．0,2．0,1．5,1．5mg/L。该方法操作简便,回收率、精密度高。     

生物还原-化学沉淀法自烟气中的SO2制备ZnS

采用生物还原—化学沉淀法自烟气中的SO2制备ZnS,将含有Zn(OH)2杂质的粗品ZnS通过化学提纯制得高纯度ZnS。实验结果表明,采用NH4C l-NH3.H2O混合液对含有Zn(OH)2杂质的粗品ZnS进行提纯的优化条件为:每500m g粗品ZnS加入NH4C l与NH3.H2O摩尔比为1∶1、两组分浓度均为3.0m o l/L的10mLNH4C l-NH3.H2O混合液。X射线衍射分析表明,提纯后的产物粉末全部为ZnS,其纯度与ZnS标准试样相当。     

CO2资源化利用的现状及前景

介绍了CO2分离捕集最新工艺——电化学法、膜法、化学循环燃烧法的研究进展。评述分析了CO2的各种资源化应用前景：CO2气体用作生物碳源、辅助注射成型剂及有机物（如氨基甲酸酯、表面活性剂）合成原料等;液态CO2用于人造金刚石、热泵干燥、超临界CO2萃取及固体干冰冷喷射清洗等。CO2作为一种潜在的丰富碳源,应不断研发其新的应用领域,加快其工业化应用。     

原料含水率及成型直径对秸秆成型燃料耐久性的影响

原料含水率及成型直径对秸秆成型燃料耐久性具有重要影响,通过试验发现含水率对秸秆固化成型(SDBF)技术的抗渗水性影响很显著,原料含水率10%～15%(质量分数,下同)范围内得到的SDBF渗水分解超过4 h;原料含水率也显著影响SDBF的抗跌碎性,含水率不大于15%的SDBF失重率一般不超过5%,能满足规模化技术的应用.对于HPB-成型机生产的SDBF,成型直径大的SDBF抗渗水性时间较长,随着成型直径减小抗渗水性时间减少,抗渗水性能降低.     

人工浮床栽培7种植物在富营养化水体中的生长特性研究

本研究利用人工浮床在富营养化水体栽培了7种植物,成活率都在70%以上,2个月的生长期内生物的生长量都超过20kg鲜重/m2.浮床栽培芦苇的净化效果最好,每平方米的芦苇浮床可以使117.93 m3的水从V类水质净化为Ⅲ类水质(以总磷计),其次分别为荻、水稻、蕹菜、牛筋草、香蒲和美人蕉.对蕹菜和水稻植株的检测表明,分别作为蔬菜和青饲料完全符合国家有关卫生标准.