酸雨损害农作物的对策研究——喷水消除酸雨对农作物的损害

经模拟酸雨处理植物的试验表明,酸雨对植物叶片的直接损害是由于酸雨水滴滞留在叶面引起的。若在雨后2h内喷水(pH7.0±0.2)以驱除滞留在叶面的水滴,叶片则无受害症状,叶绿素含量、生物产量和经济产量所受的影响也将减轻甚至完全不受影响。     

Detection of polycyclic aromatic hydrocarbons using a high performance-single particle aerosol mass spectrometer

The real-time detection of the mixing states of polycyclic aromatic hydrocarbons (PAHs) and nitro-PAHs in ambient particles is of great significance for analyzing the source, aging process, and health effects of PAHs and nitro-PAHs; yet there is still few effective technology to achieve this type of detection. In this study, 11 types of PAH and nitro-PAH standard samples were analyzed using a high performance-single particle aerosol mass spectrometer (HP-SPAMS) in lab studies. The identification principles ‘parent ions’ and ‘mass-to-charge (m/z) = 77’ of each compound were obtained in this study. It was found that different laser energies did not affect the identification of the parent ions. The comparative experiments of ambient atmospheric particles, cooking and biomass burning emitted particles with and without the addition of PAHs were conducted and ruled out the interferences from primary and secondary organics on the identification of PAHs. Besides, the reliability of the characteristic ions extraction method was evaluated through the comparative study of similarity algorithm and deep learning algorithm. In addition, the real PAH-containing particles from vehicle exhaust emissions and ambient particles were also analyzed. This study improves the ability of single particle mass spectrometry technology to detect PAHs and nitro-PAHs, and HP-SPAMS was superior to SPAMS for detecting single particles containing PAHs and nitro-PAHs. This study provides support for subsequent ambient observations to identify the characteristic spectrum of single particles containing PAHs and nitro-PAHs.     

我国中小城市大气污染总量控制研究

本文提出了一套适合于我国中小城市大气污染总量控制研究的技术路线和模型。通过环境容量规划和污染综合治理规划的有机结合，从而达到以优化的方式协调经济发展与环境保护的矛盾。对镇江市的应用结果表明，本文提出的技术路线和模型是合理可行的。所给出的总量控制方案既能符合经济发展的需要，又能经济有效地控制并改善区域的大气环境质量。     

膨胀珍珠岩负载TiO2光催化脱色性能的研究

以钛酸四丁酯为原料 ,膨胀珍珠岩为载体 ,用溶胶 -凝胶法制备可漂浮于水面的负载型TiO2 。利用该负载型TiO2 对罗丹明B(RB)进行光催化脱色实验 ,结果表明 ,浸渍 3次的负载型TiO2 光催化活性最高 ,催化剂最佳用量为 5 0 0mg/10 0mLRB ,经 5h光照 ,对 10 0mL浓度为 1mg/L和 2 .5mg/LRB脱色率分别为 76 .6 7%和 4 7.2 7% ;该催化剂使用寿命长 ,2 5h后催化剂脱色性能没有减弱 ,可重复使用 ;经 8h光照 ,染料废水脱色效果好。     

Estimation of organic carbon blank values and error structures of the speciation trends network data for source apportionment

Because the particulate organic carbon (OC) concentrations reported in U.S. Environment Protection Agency Speciation Trends Network (STN) data were not blank corrected, the OC blank concentrations were estimated using the intercept in particulate matter < or = 2.5 microm in aerodynamic diameter (PM2.5) regression against OC concentrations. The estimated OC blank concentrations ranged from 1 to 2.4 microg/m3 showing higher values in urban areas for the 13 monitoring sites in the northeastern United States. In the STN data, several different samplers and analyzers are used, and various instruments show different method detection limit (MDL) values, as well as errors. A comprehensive set of error structures that would be used for numerous source apportionment studies of STN data was estimated by comparing a limited set of measured concentrations and their associated uncertainties. To examine the estimated error structures and investigate the appropriate MDL values, PM2.5 samples collected at a STN site in Burlington, VT, were analyzed through the application of the positive matrix factorization. A total of 323 samples that were collected between December 2000 and December 2003 and 49 species based on several variable selection criteria were used, and eight sources were successfully identified in this study with the estimated error structures and min values among different MDL values from the five instruments: secondary sulfate aerosol (41%), secondary nitrate aerosol (20%), airborne soil (15%), gasoline vehicle emissions (7%), diesel emissions (7%), aged sea salt (4%), copper smelting (3%), and ferrous smelting (2%). Time series plots of contributions from airborne soil indicate that the highly elevated impacts from this source were likely caused primarily by dust storms.     

广州李坑生活垃圾填埋场周围植被现状调查与影响分析

为对垃圾填埋场封场后如何进行生态恢复研究提供基础资料，对超负荷运转中的广州市李坑生活垃圾填埋场周围的植被现状进行了调查，测算了物种量、覆盖度、污染状况等。同时运用植被覆盖度、结构、物种量和相对物种量等级评价以及对Zn、Cd等6种污染物的质量指数进行了评价。结果表明，所调查填埋场场区及灌区内有轻度污染，而场外与灌区外则相对较轻或无污染。     

Performance of the Button Personal Inhalable Sampler for the measurement of outdoor aeroallergens

No personal aerosol sampler has been evaluated for monitoring aeroallergens in outdoor field conditions and compared to conventional stationary aerobiological samplers. Recently developed Button Personal Inhalable Aerosol Sampler has demonstrated high sampling efficiency for non-biological particles and low sensitivity to the wind direction and velocity. The aim of the present study was to evaluate the Button Sampler for the measurement of outdoor pollen grains and fungal spores side-by-side with the widely used Rotorod Sampler. The sampling was performed for 8 months (spring, summer and fall) at a monitoring station on the roof of a two-storied office building located in the center of the city of Cincinnati. Two identical Button Samplers, one oriented towards the most prevalent wind and the other towards the opposite wind and a Rotorod Sampler were placed side-by-side. The total fungal spore concentration ranged from 129 to 12,980 spores m(-3) (number per cubic meter of air) and the total pollen concentration from 4 to 4536 pollen m(-3). The fungal spore concentrations obtained with the two Button Samplers correlated well (r = 0.95; p<0.0001). The pollen data also showed positive correlation. These findings strongly support the results of earlier studies conducted with non-biological aerosol particles, which demonstrated a low wind dependence of the performance of the Button Sampler compared to other samplers. The Button Sampler's inlet efficiency was found to be more dependent on wind direction when sampling larger sized Pinaceae pollen grains (aerodynamic diameter approximately 65 mum). Compared to Rotorod, both Button Samplers measured significantly higher total fungal spore concentrations. For total pollen count, the Button Sampler facing the prevalent wind showed concentrations levels comparable to that of the Rotorod, but the Button Sampler oriented opposite to the prevalent wind demonstrated lower concentration levels. Overall, it was concluded that the Button Sampler is efficient for the personal sampling of outdoor aeroallergens, and is especially beneficial for aeroallergens of small particle size.     

用磁选与浮选实现碱洗废液的净化与再用

碱洗是硅钢生产的重要环节。碱洗液随使用时间的延长 ,其中会累积大量杂质 ,造成碱液清洗效率下降而失效。本文使用磁选与浮选联合法去除碱液中的杂质 ,达到了提高碱洗效率并实现碱液的循环再用     

中国污水治理的一个新思考

本文通过对中国地形及气候特征的讨论 ,提出沙漠治水 ,水治沙漠的观点 ,为中国及其他国家的污水治理 ,提供一种新的思路和建议     

Experimental study on the removal of PAHs using in-duct activated carbon injection

This paper presents the incineration tests of municipal solid waste (MSW) in a fluidized bed and the adsorption of activated carbon (AC) on polycyclic aromatic hydrocarbons (PAHs). An extraction and high performance liquid chromatography (HPLC) technique was used to analyze the concentrations of the 16 US EPA specified PAHs contained in raw MSW, flue gas, fly ash, and bottom ash. The aim of this work was to decide the influence of AC on the distribution of PAHs during the incineration of MSW. Experimental researches show that there were a few PAHs in MSW and bottom ash. With the increase of AC feeding rate, the concentrations of three- to six-ring PAHs in fly ash increased, and the concentration of two-ring PAH decreased. The total-PAHs in flue gas were dominated by three-, and four-ring PAHs, but a few two-, five-ring PAHs and no six-ring PAHs were found. PAHs could be removed effectively from flue gas by using in-duct AC injection and the removal efficiencies of PAHs were about 76-91%. In addition, the total toxic equivalent (TEQ) concentrations of PAH in raw MSW, bottom ash, fly ash, and flue gas were 1.24 mg TEQ kg-1, 0.25 mg TEQ kg-1, 6.89-9.67 mg TEQ kg-1, and 0.36-1.50 microg TEQ Nm-3, respectively.