电渗析技术的新进展

电渗析技术是膜分离技术之一 ,由于具有高效、低能耗等特点已经被多个行业广泛使用。本文阐述了几种新的电渗析技术 ,包括无隔板电渗析、填充床电渗析、双极膜电渗析等 ,并探讨和综述其研究现状和发展前景。     

Cornstarch explosion experiments and modeling in vessels ranged by height/diameter ratios

Height to diameter (H/D) ratio is one of the important parameters affecting premixed particle–air combustion characteristics. This paper focuses on the behavior of cornstarch combustion in closed vessels with changed H/D ratios and fixed volumes; and a combustion model is employed to simulate the experiments. An Eulerian–Lagrangian approach for two-phase flows was used in the model and conservation equations of unsteady turbulent two-phase reacting flows were solved in two-dimensional domains. Heat loss to the vessel walls was taken into consideration in the model. The simulation results have a good agreement with those of experiments. Further simulations were carried out for higher H/D ratios from 8 to 15. These results show that H/D=8 is a changing point. When H/D<8, the maximum pressure and the rate of maximum pressure rise decrease with increasing H/D ratios. While H/D>8, the both have an increasing tendency with increasing H/D ratios.     

贯彻“预防为主”的方针加强安全生产管理及职能转变的思考

为认真贯彻落实“安全第一 ,预防为主”的思想和安全生产工作方针 ,从坚持“以防为主”树立大安全思想等 6个方面进行论述 ;力求促进健全完善适应市场经济的现行安全生产管理体制 ,在宏观与微观 ,群管与专管、理论与实践的结合上 ,强化管理 ,取得实效。     

南京市不同功能区PM10中多环芳烃的污染特征

PM10是衡量大气环境质量好坏的重要指标之一;多环芳烃(PAHs)是具有强烈致癌性的有机污染物,大多吸附在粒径小于10 μm颗粒物上.利用长期定位实验采集了南京市两典型功能区--大厂地区和山西路的PM10样品,对其PAHs质量浓度进行了分析测定,研究了不同功能区PM10中PAHs的时空污染特性.研究结果表明:南京市PM10污染比较严重,其质量浓度变化范围在0.1157 mg·m-3～0.3913 mg·m-3之间;经分析PM10中16种优控多环芳烃(PAHs)发现,全年大厂地区的PAHs的质量浓度与山西路PAHs的质量浓度没有明显的高低之分;PAHs总质量浓度的空间变化不明显,时间变化也没有规律性;比较PM10与PAHs的月平均质量浓度变化趋势,两者之间的变化没有相关性,各自的质量浓度变化也没有规律性,分析其结果可能是由于PAHs的不稳定性造成的.     

Capacity of transportation and spread of COVID-19—an ironical fact for developed countries

Environmental Science and Pollution Research - The widespread epidemic of the COVID-19 in developed countries such as Europe and the USA has sparked many speculations. What factors caused the rapid...     

千岛湖配水工程的环境成本估算——基于调水区支付意愿调查

由于水资源分布不均、水污染日趋严重,调水工程已不仅用以解决城市资源型缺水,也成为一些地区缓解水质型缺水问题的途径,但是这些耗资巨大的调水工程往往对周围自然生态环境可能产生巨大影响,可能带来的环境成本不容忽视。以千岛湖配水工程为例,通过在调水地进行实地调研和问卷调查,运用Tobit模型分析影响居民支付意愿的因素,基于意愿调查法(CVM)分析了建德市人民对千岛湖配水工程的生态环境影响的支付意愿,并以此估算该工程的环境成本。结果表明,调水地居民对恢复和改善可能破坏的生态环境的平均支付意愿约为每人每年377.6～542.1元,按照年配水量9.78亿 m³可以计算每吨水的环境成本约为0.15～0.21元。由此估算,工程期内千岛湖配水工程可能造成的环境成本总计约为5.80～8.28亿元,高于2014年公布的《杭州市第二水源千岛湖配水工程环境影响报告书》(下文简称《报告书》)中对该工程的环境经济影响评价3.70亿元。千岛湖配水工程的环境成本不容忽视,必须建立科学的生态补偿机制,加强监管;同时受水地也应积极加强污染治理和节约用水,共同解决城市水质型缺水问题。     

顶空气相色谱法测定水和废水中的邻二氯苯

采用顶空采样,填充柱分离,ECD测定水和废水中的邻二氯苯,在柱温150℃,进样室温200℃,ECD温300％下,邻二氯苯的保留时间为3．78min,该方法灵敏度高,最低检出浓度为0．02μg／L;精密度好,对标准样品六次测定的相对标准偏差小于3．9％;准确度高,加标回收率在95％～104％之间。操作简便、测定快速,克服了萃取法烦琐、有毒、易污染色谱柱等缺点。     

赤泥和污泥对土壤锌化学形态转化的影响

通过土壤室内培养实验,研究了赤泥和污泥对土壤中Zn化学形态转化的影响。研究表明:单独使用赤泥可以有效降低土壤中植物可利用态Zn含量,促进可交换态(EXC)、碳酸盐结合态(CA)、有机结合态(OM)转化为残渣态(RES),而污泥对Zn的固稳效果是暂时的。赤泥和污泥的一起使用较单独使用赤泥或污泥固稳Zn的效果好,既能促进有效态重金属Zn转化为不可利用态Zn,又能增加土壤肥力。     

Effect of bulk density of coking coal on swelling pressure

Coking coals are the important raw materials for the iron and steel industries and play an important role on its sustainable development, especially on the stamp-charging coke making with the characteristics of increasing the bulk density. There is a significance on the reasonable usage of the coking coal resource with the reduced production cost, improved efficiency of the economy to develop the stamp-charging coke making technology. Important effects of the density of coking coal on the coking and caking properties were investigated. In the article, the maximum values of swelling pressure and variation of Laowan gas coal and Xinjian 1/3 coking coal, Longhu fat coal and Didao coking coal, which were mined at Shenyang and Qitaihe respectively, were investigated under different bulk densities during the coking. The results showed that when the values of density increased from 0.85 ton/m³ to 1.05 ton/m³, for the Laowan gas coal, swelling pressure variation and even the maximum value changed slightly. The swelling pressure was 3.63 KPa when the density was improved to 1.05 ton/m³; for the Xinjian 1/3 coking coal, the values of swelling pressure changed significantly and the maximum values was 82.88 KPa with the density improved to 1.05 when the coal was heated to 600℃. The coke porosity, which was investigated by automatic microphotometer, decreased from 47.4% to 33.1% with the increasing of the density from 0.85 ton/m³ to 1.05 ton/m³, and the decreased value was 14.3%. Meanwhile, the pore structures of four cokes were characterized by an optical microscope.     

Effect of mass fraction of long flame coal on swelling pressure and microstructures of cokes

Long flame coal are abundant and widely distributed in China, but the resource utilization is quite low, the production efficiency is not high. Stamp-charging coke making technology can bend some long flame coal, which can reduce production cost and expand the coking coal resources. The long flame coal of different mass fraction is added into prime coking coal including fat coal from Longhu, 1/3 coking coal from Xinjian and coking coal from Didao in experiment. The swelling pressure is tested on-line detection using pressure sensor in coke making process, and the pores are observed by scanning electron microscopy. The results show that, the swelling pressure first increase and then decrease with the temperature increased and the maximum swelling pressure reduces gradually with mass fraction of the Long flame coal from Shenmu increased in coke making process. The SEM images of resultant coke display that the coke get more and more loose and the amount of pores is increased with mass fraction of the long flame coal from Shenmu increased. The amount pores and the pore diameter both is minimum for coking coal from Didao as prime coking coal under the same fraction of long flame coal.