炭素焙烧沥青烟气治理

采用生石灰吸附袋式除尘法治理炭素焙烧窑沥青烟气 ,具有很好的效果。治理前烟尘 114 8.7mg/ Nm3,沥青烟 480 .5mg/ Nm3,苯并 (a)芘 3 .462 mg/ Nm3;治理后烟尘 12 .8mg/ Nm3,沥青烟 11.0 mg/ Nm3,苯并 (a)芘 3 .0× 10 - 4m g/ Nm3。从运行效果来看 ,烟气的充分冷却和选用生石灰做吸附剂是治理成功的关键。     

基于WATER9模型的城镇污水处理中VOCs排放量研究

通过开展城镇污水处理模拟实验,与WATER9模拟结果比对和误差分析,使用优化后的WATER9模型模拟计算扬州汤汪污水处理厂一期工程的VOCs排放量,并分析各参数对VOCs排放量的影响.结果表明:WATER9模型满足城市污水处理厂污水处理过程中VOCs排放量的模拟要求,优化后的模拟值与实测值之间的相对偏差小于8％.实验结...     

A statistical analysis of the carbon dioxide capture process

Post combustion carbon dioxide (CO₂) capture is one of the most commonly adopted technologies for reducing industrial CO₂ emissions, which is now an important goal given the widespread concern over global warming. Research on amine-based CO₂ capture has mainly focused on improving effectiveness and efficiency of the CO₂ capture process. Our research work focuses on studying the relationships among the significant parameters influencing CO₂ production because an enhanced understanding of the intricate relationships among the parameters involved in the process is critical for improving efficiency of the CO₂ capture process. This paper presents a statistical study that explores the relationships among parameters involved in the amine-based post combustion CO₂ capture process at the International Centre for CO₂ Capture (ITC) located in Regina, Saskatchewan of Canada. A multiple regression technique has been applied for analysis of data collected at the CO₂ capture pilot plant at ITC. The parameters have been carefully selected to avoid issues of multicollinearity, and four mathematical models among the key parameters identified have been developed. The models have been tested, and accuracy of the models is found to be satisfactory. The models developed in this study describe part of the CO₂ capture process and can help to predict performance of the CO₂ capture process at ITC under different conditions. Some results from a preliminary validation process will also be presented.     

An integrated impact assessment and weighting methodology: evaluation of the environmental consequences of computer display technology substitution

Computer display technology is currently in a state of transition, as the traditional technology of cathode ray tubes is being replaced by liquid crystal display flat-panel technology. Technology substitution and process innovation require the evaluation of the trade-offs among environmental impact, cost, and engineering performance attributes. General impact assessment methodologies, decision analysis and management tools, and optimization methods commonly used in engineering cannot efficiently address the issues needed for such evaluation. The conventional Life Cycle Assessment (LCA) process often generates results that can be subject to multiple interpretations, although the advantages of the LCA concept and framework obtain wide recognition. In the present work, the LCA concept is integrated with Quality Function Deployment (QFD), a popular industrial quality management tool, which is used as the framework for the development of our integrated model. The problem of weighting is addressed by using pairwise comparison of stakeholder preferences. Thus, this paper presents a new integrated analytical approach, Integrated Industrial Ecology Function Deployment (I2-EFD), to assess the environmental behavior of alternative technologies in correlation with their performance and economic characteristics. Computer display technology is used as the case study to further develop our methodology through the modification and integration of various quality management tools (e.g., process mapping, prioritization matrix) and statistical methods (e.g., multi-attribute analysis, cluster analysis). Life cycle thinking provides the foundation for our methodology, as we utilize a published LCA report, which stopped at the characterization step, as our starting point. Further, we evaluate the validity and feasibility of our methodology by considering uncertainty and conducting sensitivity analysis.     

上海市工业区环境管理问题与对策浅析

在对上海市78家工业区进行抽样调查的基础上，分析了工业区环境管理目前存在的法规缺位，机构不健全，基础设施不健全、环评和规划实施不全面、信息沟通不畅、考核机制待改进等主要问题。并提出了加快环境管理法制建设、建立健全环境管理机构．建设和完善区域环境基础设施、全面实施区域环评和环保规划、加强与地方环保行政部门的信息沟通、建立完善环境监督和考核制度等对策和建议。     

大气污染物综合排放标准的编制技术方法

我国《大气污染综合排放标准》规定了33种大气污染物的排放限值和执行要求。标准提出了一个污染源必须同时遵守最高允许排放浓度;最高允许排放速率和无组织排放监控浓度限值三项限制指标。以众多企业的排放数据和“最佳实用治理技术”为依据制定排放浓度限值;以环境质量要求和全国大部分地区的中性气象条件为依据,经计算后确定排放速率限值;以污染源周界环境空气浓度达到质量标准要求确定无组织排放限值。经过一定范围的调查检验后,表明该标准具有基本适宜的宽严程度。     

应用LDN-1氮氧化物脱除剂实现催化再生烟气NOx达标排放

独山子炼油厂催化裂化装置再生烟气中NOx含量达到1300-1400mg／m3(国家排放标准<420mg／m3),对周围环境造成严重影响。应用LDN-1氮氧化物脱除剂后,催化再生烟气中的NOx含量由1300-1400 mg／m3降至420 mg／m3以下,实现了达标排放。     

Characterization of a fenpropathrin-degrading strain and construction of a genetically engineered microorganism for simultaneous degradation of methyl parathion and fenpropathrin

A gram-negative fenpropathrin-degrading bacterial strain Sphingobium sp. JQL4-5 was isolated from the wastewater treatment sludge of an insecticide factory. Strain JQL4-5 showed the ability to degrade other pyrethroid insecticides, but it was not able to degrade methyl parathion. To enhance its degrading range of substrate, a methyl parathion hydrolase gene (mpd) was successfully introduced into the chromosome of strain JQL4-5 with a mini-Tn-transposon system. A genetically engineered microorganism (GEM) named JQL4-5-mpd resulted, which was capable of simultaneously degrading methyl parathion and fenpropathrin. Soil treatment results indicated that JQL4-5-mpd is a promising multifunctional bacterium in the bioremediation of multiple pesticide-contaminated environments.     

Influence of glucose feeding on the ligninolytic enzyme production of the white-rot fungus Phanerochaete chrysosporium

The present work studied the influence of glucose feeding on the ligninolytic enzyme production of Phanerochaete chrysosporium in a nitrogen-limited (C/N ratio is 56/8.8 mmol/L) medium. Several sets of shaking flask experiments were conducted. The results showed that 2 g/L glucose feeding on the first day of the culture (24 h after the inoculation) simulated both fungal biomass growth and enzyme production. The manganese peroxidase (MnP) activity was 2.5 times greater than that produced in cultures without glucose feeding. Furthermore, the glucose feeding mode in fed-batch culture was also investigated. Compared to cultures with glucose feeding every 48 h, cultures with glucose feeding of 1.5 g/L (final concentration) every 24 h produced more enzymes. The peak and total yield of MnP activity were 2.7 and 3 times greater compared to the contrast culture, respectively, and the enzyme was kept stable for 4 days with an activity of over 200 U/L. Translated from Acta Scientise Circumstantiae, 2007, 27(3): 363–368 [译自: 环境科学学报]     

太湖地区3种水稻土不同温度培养中有机碳库变化及其对升温的响应

全球变暖下土壤有机碳储存的变化是土壤与全球变化研究的热点问题.本研究选择了3种太湖地区代表性水稻土的表层土壤,分别进行20℃和25℃的室内恒温培养,监测培养过程中总有机碳、溶解性有机碳和微生物量碳的变化动态,试图了解这些土壤的有机碳分解过程对全球变暖的响应特点.结果表明,这些土壤培养中总有机碳变化可以用一级衰变动力学方程或对数衰减方程描述,但动力学特征依培养温度的不同而异.升温大大促进了铁渗水耕人为土和潜育水耕人为土中有机碳的分解与呼吸损失,而铁聚水耕人为土没有显著变化.供试土壤总有机碳损失的Q₁₀系数分别为:潜育水耕人为土(11.1～14.1)＞铁渗水耕人为土(4.4～6.4)＞铁聚水耕人为土(0.63～0.73).这一方面说明温度敏感性在同一地带的不同土壤间的差异超过文献上报道的不同气候带的差异,但另一方面揭示了水稻土可能是一类对全球升温敏感响应的人为土.溶解性有机碳和微生物量的碳的变化还提示不同温度培养下水稻土微生物群落结构可能改变,因而影响到土壤有机碳库的生物有效性在温度条件下的变化.可以认为,土壤升温下有机碳的变化不但与土壤有机碳的性质有关,而且与土壤性质控制下的生物条件的改变有关.故土壤升温下有机碳的损失不仅仅是温度对分解过程的反应速度的影响.当然,对于不同土壤间的这种差异还需从有机碳-土壤环境-土壤生物的相互关系上做进一步的工作.