Uptake of weakly hydrophobic nitroaromatics from water by semipermeable membrane devices (SPMDs) and by goldfish (Carassius auratus)

Semipermeable membrane devices (SPMDs) filled with triolein, and goldfish (Carassius auratus) were simultaneously exposed to nine weakly hydrophobic nitroaromatics in a laboratory continuous-flow experiment. The results showed that the device concentrated the compounds in most cases to a larger extent than fish and that the overall uptake rate constants (Kmu) and average pollutant sampling rates (R(S)) were similar. We conclude that the SPMDs may be used to determine the levels of weakly hydrophobic nitroaromatics in water. It is obvious, however, that more researches at laboratory in order to establish kinetic database for a wide spectrum of compounds varying in lipophilicity and other properties are needed to elucidate various theoretical and practical aspects of the use of membranes in the environmental research and for related practical applications.     

Characterizing effects of uncertainties in MSW composting process through a coupled fuzzy vertex and factorial-analysis approach

A coupled fuzzy vertex and factorial-analysis approach was developed in this study for systematically characterizing effects of uncertainties in a municipal solid waste composting process. A comprehensive composting process model was also embedded into the system framework and used to address substrate decomposition and biomass growth, as well as the interactions between moisture contents, temperatures, and oxygen concentrations. The applicability of the proposed method was verified through a custom-made pilot-scale composting system. Results from fuzzy simulation indicated that the fuzzy vertex method could effectively communicate implicit knowledge into dynamic simulations and thus provide valuable information for enhancing composting process control under uncertainty. The factorial analysis was effective in quantifying the proportion to which the uncertainty of each single or interactive effect of model parameters contributes to the overall uncertainty of the system outcomes. Thus, sensitive parameters that may lead to errors or unreasonable predictions can be determined. The proposed study system could not only be used in characterizing combined effects of uncertainties for composting processes, but was also applicable to many other environmental modelling systems.     

Assessing the Geographic Representativeness of Genebank Collections: the Case of Bolivian Wild Potatoes

Abstract: Genebank collection databases can be used for ecogeographical studies under the assumption that the accessions are a geographically unbiased sample. We evaluated the representativeness of a collection of wild potatoes from Bolivia and defined and assessed four types of bias: species, species-area, hotspot, and infrastructure. Species bias is the sampling of some species more often than others. Species-area bias is a sampling that is disproportionate to the total area in which a species is found. Hotspot bias is the disproportionate sampling of areas with high levels of diversity. Infrastructure bias is the disproportionate sampling of areas near roads and towns. Each of these biases is present in the Bolivian wild potato collection. The infrastructure bias was strong: 60% of all wild potato accessions were collected within 2 km of a road, as opposed to 22%, if collections had been made randomly. This analysis can serve as a guide for future collecting trips. It can also provide baseline information for the application of genebank data in studies based on geographic information systems.     

Genetic protein variation in red mullet (Mullus barbatus) and striped red mullet (M. surmuletus) populations from the Mediterranean Sea

Starch-gel electrophoresis of allozymes was used to differentiate the two red mullet species (Mullus barbatus L. and M. surmuletus L.) in the Mediterranean Sea and, further, to investigate the genetic stock structure of M. barbatus in the eastern Mediterranean area. Twenty putative enzyme-coding loci were examined in eight M. barbatus samples caught in the Aegean and Ionian Seas (Greece) and in the Gulf of Lion (France), and two M. surmuletus samples caught in the Aegean and Gulf of Lion. A high degree of genetic polymorphism was found in both species. Species-specific electrophoretic patterns were found in PGI* and PGM*. Estimates of variance of allele frequencies among samples (F _ST) and ² analyses both revealed significant differences (P < 0.05) among the M. barbatus samples. Most of the genetic variation was among samples regardless of region. The mean value of Nei's genetic distance between the two species was 0.329. Genetic distance among M. barbatus samples was low (maximum Nei's D = 0.012), with the sample from Platania differing most from other M. barbatus samples. This is probably be due to founder effects existing at this area. These results suggest that allozyme analysis may provide important information on the genetic structure of the red mullet to ensure sustainable management of this species. Received: 7 May 1997 / Accepted: 13 October 1997     

生物过滤技术在大气污染控制中的应用

生物过滤是控制大气污染的经济有效技术,具有较好的发展前景。本文介绍了生物过滤技术处理废气的研究,应用历史,现状,和生物过滤理论,分析了工艺的使用范围,设计及运行控制要点,列举了应用的范例。     

玉米中四种镰刀菌毒素系统检测方法的研究

本文用气相色谱仪同步检测霉变玉米中脱氧雪腐镰刀菌烯醇、二乙酰氧基镳草镰刀菌烯醇、Ｔ－２毒素和玉米赤霉烯酮四种镰刀菌毒素,并筛选出较理想的衍生化试剂和衍生化条件。确定从玉米中对极性不同的四种毒素都有较高回收率的萃取、净化程序。建立了玉米中四种毒素的系统检测方法。本方法对四种毒素的回收率均达到８０％以上。     

活性碳纤维吸附废气中的丙烯酸和甲苯

采用动态吸附法探讨了在活性碳纤维对模拟废气中丙烯酸和甲苯的吸附过程中,各因素对活性碳纤维穿透吸附量和饱和吸附量的影响。实验结果表明,在模拟废气中丙烯酸质量分数为0.2%、双柱塞泵流量为6.1mL/h、载气流量为1.60L/min的条件下,穿透时间为10min,活性碳纤维的穿透吸附量为227.5mg/g,饱和吸附时间为40min,活性碳纤维的饱和吸附量为460.0m g/g。     

水合肼生产盐渣中氮化合物的去除

将水合肼生产盐渣分离碳酸钠后,通过吹脱、氧化等工艺降低饱和盐溶液的氮含量(以氨质量浓度计),以达到电解法制备氢氧化钠工艺对原料氯化钠的使用要求。中试试验结果表明:氧化反应最佳工艺条件为以次氯酸钠为氧化剂,次氯酸钠溶液中氢氧化钠质量浓度9.2g/L,次氯酸钠与初始氨的质量比为13,溶液pH 7～8,反应温度30～35℃;在此条件下氧化处理饱和盐溶液,处理后氨质量浓度由350.0 mg/L降至2.1 mg/L。将处理后的饱和盐溶液用于电解法制备氢氧化钠的生产过程,不仅可创造一定的经济效益,而且还解决了水合肼生产中的环境污染问题。     

Characteristics of large cooking oil pool fires and their extinguishment by water mist

Large cooking oil pool fires, occurring in industrial oil cookers, present a severe hazard to food processing plants due to their size and the large amount of hot oil involved. This paper reports a series of full-scale fire experiments conducted in a large industrial oil cooker mock-up. The characteristics of large cooking oil pool fires and the effect of oil depth and hood position in the oil cooker on fire growth were studied. The use of water mist for extinguishing large oil pool fires and their extinguishing performance under different discharge pressure and with different types of water mist systems were investigated. Experimental results showed that the cooking oil underwent a substantial expansion in volume during heating. The fires developed quickly once the oil auto-ignited. The fire growth rate was affected by the oil depth in the pan and the hood position in the oil cooker. The water mist fire suppression systems effectively extinguished large cooking oil fires and prevented them from re-igniting. Their extinguishing performance was determined by the type of water mist system, discharge pressure and hood position in the oil cooker.     

Enhanced NOx removal from flue gas by an integrated process of chemical absorption coupled with two-stage biological reduction using immobilized microorganisms

An integrated process of metal chelate absorption coupled with two stage bio-reduction using immobilized cultures has been proposed to continuously removal of NO_x, and the effects of SO₂, NO and O₂ concentration, gas/liquid flow rate on NO_x removal efficiency were investigated. Although nitrogen-containing components, such as Fe(II)EDTA-NO, NO₂^? and NO₃^? in the scrubbing solution, inhibited the bio-reduction of Fe(III)EDTA obviously, it was feasible to abate the inhibition effect by using the two stage bio-reduction system, and thus to improve NO_x removal efficiency. The removal efficiency decreased slowly with the increase of SO₂, O₂, NO concentration and gas flow rate, and increased with the increase of liquid flow rate. Continuously operating for 18 days, a high removal efficiency around 95% was reached by using the two-stage bio-reduction system with immobilized microorganisms, while the value decreased to 85% after 5 days of operation by using the suspended microorganisms, at a constant gas flow rate of 60 L/h containing 424–450 mg/m³ NO, 2428–2532 mg/m³ SO₂ and 3% O₂.