Water Management Applications for Satellite Precipitation Products: Synthesis and Recommendations

This article is an assessment of the current state of the art and relative utility of satellite precipitation products (SPPs) for hydrologic applications to support water management decisions. We present a review of SPPs, their accuracy in diverse settings including the influence of geography, topography, and weather systems, as well as the pros and cons of their use for different water management applications. At the end of this broad synthesizing effort, recommendations are proposed for: (1) SPP developers to improve the quality, usability, and relevance of precipitation products; and (2) SPP users to improve the reliability of their predictions and hydrologic applications to better support water management.     

A Recourse‐Based Interval Fuzzy Programming Model for Point‐Nonpoint Source Effluent Trading under Uncertainty

In this study, a recourse‐based interval fuzzy programming (RIFP) model is developed for tackling uncertainties expressed as fuzzy, interval, and/or probabilistic forms in an effluent trading program. It can incorporate preregulated water‐pollution control policies directly into its optimization process, such that an effective linkage between environmental regulations and economic implications (i.e., penalties) caused by improper policies due to uncertainty existence can be provided. The RIFP model is applied to point‐nonpoint source effluent trading of the Xiangxi River in China. The efficiency of trading efforts between water quality improvement and net system benefit under different degrees of satisfying discharge limits is analyzed. The results are able to help support (1) formulation of water‐pollution control strategies under various economic objectives and system‐reliability constraints, (2) selection of the desired effluent trading pattern for point and nonpoint sources, and (3) generation of tradeoffs among system benefit, satisfaction degree, and pollutant mitigation under multiple uncertainties. Compared with the traditional regulatory approaches, the results demonstrate that the water‐pollution control program can be performed more cost‐effectively through trading than nontrading.     

Blowing Smoke in Yellowstone: Air Quality Impacts of Oversnow Motorized Recreation in the Park

Snowmobile use in Yellowstone National Park has been shown to impact air quality, with implications for the safety and welfare of Park staff and other Park resource values. Localized impacts have been documented at several high-use sites in the Park, but the broader spatial variability of snowmobile emissions and air quality was not understood. Measurements of 87 volatile organic compounds (VOCs) were made for ambient air sampled across the Park and West Yellowstone, Montana, during 2 days of the 2002–2003 winter use season, 1 year before the implementation of a new snowmobile policy. The data were compared with similar data from pristine West Coast sites at similar latitudes. Backward trajectories of local air masses, alkyl nitrate-parent alkane ratios, and atmospheric soundings were used to identify the VOC sources and assess their impact. Different oversnow vehicle types used in the Park were sampled to determine their relative influence on air mass pollutant composition. VOCs were of local origin and demonstrated strong spatiotemporal variability that is primarily influenced by levels of snowmobile traffic on given road segments at different times of day. High levels of snowmobile traffic in and around West Yellowstone produced consistently high levels of benzene, toluene, and carbon monoxide.     

A process integration approach to industrial water conservation: a case study for a Chinese steel plant

A systematic approach to optimizing water network has traditionally been utilized to exam and plan water conservation in industrial processes. In the present case study, water-pinch technology was used to analyze and optimize the water network of a steel plant near China's Zhangjiakou city. A system design was developed and a limiting constraint (Cl(-) concentration) was identified based on investigations of water quality then the minimum freshwater and wastewater targets were determined without considering water losses. The analysis was then extended by calculating the additional input of freshwater required to balance the actual water losses. A nearest-neighbor algorithm (NNA) was used to distribute the freshwater and recycled water among each of the plant's operations. The results showed that with some reconstruction of the water network, the flow rates of freshwater and wastewater could be decreased by 57.5% and 81.9%, respectively.     

Economic assessment of the health effects related to particulate matter pollution in 111 Chinese cities by using economic burden of disease analysis

With China's rapid economic development, environmental problems have become more and more serious. Particulate air pollution is terrible in cities with large and dense population. It may lead to adverse health effects and economic costs. In this study, we calculated the health effects of pollution caused by particulate matter with aerodynamic diameters less than 10mum (PM(10)) in 111 Chinese cities in 2004 according to statistical data and epidemiological exposure-response functions. Using economic burden of disease analysis, an economic assessment of these health risks was also presented. In contrast to many previous studies that have examined individual cities, this study covered most large and medium-sized cities in China, which accounted for more than 70% gross domestic product (GDP) of China in 2004. The total economic cost caused by PM(10) pollution was estimated as approximately US$ 29,178.7 million. Mega cities such as Beijing, Shanghai, and Tianjin contribute relatively more to the total costs. The results will help policy makers in formulating more effective countermeasures and increasing public awareness to enhance environmental protection.     

Adsorption-desorption characteristics of mercury in paddy soils of China

Mercury (Hg) has received considerable attention because of its association with various human health problems. Adsorption-desorption behavior of Hg at contaminated levels in two paddy soils was investigated. The two representative soils for rice production in China, locally referred to as a yellowish red soil (YRS) and silty loam soil (SLS) and classified as Gleyi-Stagnic Anthrosols in FAO/UNESCO nomenclature, were respectively collected from Jiaxin County and Xiasha District of Hangzhou City, Zhejiang Province. The YRS adsorbed more Hg(2+) than the SLS. The characteristics of Hg adsorption could be described by the simple Langmuir adsorption equation (r2 = 0.999 and 0.999, P < 0.01, respectively, for the SLS and YRS). The maximum adsorption values (Xm) that were obtained from the simple Langmuir model were 111 and 213 mg Hg(2+) kg(-1) soil, respectively, for the SLS and YRS. Adsorption of Hg(2+) decreased soil pH by 0.75 unit for the SLS soil and 0.91 unit for the YRS soil at the highest loading. The distribution coefficient (kd) of Hg in the soil decreased exponentially with increasing Hg(2+) loading. After five successive desorptions with 0.01 mol L(-1) KCl solution (pH 5.4), 0 to 24.4% of the total adsorbed Hg(2+) in the SLS soil was desorbed and the corresponding value of the YRS soil was 0 to 14.4%, indicating that the SLS soil had a lower affinity for Hg(2+) than the YRS soil at the same Hg(2+) loading. Different mechanisms are likely involved in Hg(2+) adsorption-desorption at different levels of Hg(2+) loading and between the two soils.     

Estimating Forest Ecosystem Evapotranspiration at Multiple Temporal Scales With a Dimension Analysis Approach1

Abstract:  It is critical that evapotranspiration (ET) be quantified accurately so that scientists can evaluate the effects of land management and global change on water availability, streamflow, nutrient and sediment loading, and ecosystem productivity in watersheds. The objective of this study was to derive a new semi‐empirical ET modeled using a dimension analysis method that could be used to estimate forest ET effectively at multiple temporal scales. The model developed describes ET as a function of water availability for evaporation and transpiration, potential ET demand, air humidity, and land surface characteristics. The model was tested with long‐term hydrometeorological data from five research sites with distinct forest hydrology in the United States and China. Averaged simulation error for daily ET was within 0.5 mm/day. The annual ET at each of the five study sites were within 7% of measured values. Results suggest that the model can accurately capture the temporal dynamics of ET in forest ecosystems at daily, monthly, and annual scales. The model is climate‐driven and is sensitive to topography and vegetation characteristics and thus has potential to be used to examine the compounding hydrologic responses to land cover and climate changes at multiple temporal scales.     

A study on oxidative degradation of polyacrylamide in wastewater with UV/FENTON/C4H4O62−

The degradation of polyacrylamide (PAM) in simulate wastewater was studied in UV/Fenton/C₄H₄O₆^2? system. The factors such as molecular ratio of H₂O₂/Fe²⁺/C₄H₄O₆^2?, pH, and the dosage of Fenton reagent that could affect the PAM degradation in the UV/Fenton/C₄H₄O₆^2? system were investigated. The experimental results showed that adding C₄H₄O₆^2? to UV/Fenton system could form photosensitive ferrous complexes, which led to higher degradation efficiency of PAM. The degradation rate of PAM could be up to 95.2% under the following conditions: the concentration of H₂O₂, Fe²⁺, and C₄H₄O₆^2? were 22.5, 2.25, and 2.25 mmol/L, respectively (i.e., molecular ratio of H₂O₂/Fe²⁺/C₄H₄O₆^2? was 10:1:1), the pH value was 3.0.     

The determination and matching analysis of pinch point temperature difference in evaporator and condenser of organic rankine cycle for mixed working fluid

Exergo-economic analysis of the pinch point temperature difference (PPTD) in both evaporator and condenser of sub-critical organic Rankine cycle system (ORCs) are performed based on the first and second laws of thermodynamics. Taking mixture R13I1/R601a as a working fluid and the annual total cost per net output power Z as exergo-economic performance evaluation criterion, the effects of PPTD in evaporator ΔT_e, and the PPTD ratio of condenser to evaporator y, on the exergo-economic performance of ORCs are analyzed. Moreover, how some other parameters influence the optimal PPTD in evaporator ΔT_e,opt and the optimal PPTD ratio of condenser to evaporator y_opt are also discussed. It has been found that the exergo-economic performance of ORCs is remarkably influenced by ΔT_e and y, and there exists ΔT_e,opt and y_opt. In addition, ΔT_e,opt and y_opt are affected by heat transfer coefficient ratio of condenser to evaporator ß, the temperature of working fluid at dew point in condenser T_1a, and composition of R13I1/R601a: larger ß and T_1a lead to lower ΔT_e,opt and y_opt; by contraries, larger mass fraction of R13I1 makes ΔT_e,opt and y_opt increase, and y_opt increases linearly. The effects of the temperature of working fluid at bubble point in evaporator T_3a, mass flow rate of exhaust flue gas m_g, and inlet temperature of exhaust flue gas T_gi on ΔT_e,opt and y_opt are very slight. For comparison, three additional working fluids, namely R601a, R245fa, and 0.32R245fa/0.68R601a, are also taken into account.     

Structure optimization and annual performance analysis of the lens-walled compound parabolic concentrator

The primary lens-walled compound parabolic concentrator (lens-walled CPC) has a significant advantage of a larger half acceptance angle as a static solar concentrator, but it also has a drawback of a low optical efficiency. In order to overcome this drawback, in this article, series of structure parameters were investigated and compared to further improve the optical efficiency within the half acceptance angle combined with the material properties. The average optical efficiencies of the improved lens-walled CPCs could achieve more than 82% within the half acceptance angle of 35?. Experiments were adopted to verify the credibility and validity of the simulation. Moreover, annual performance of the lens-walled CPCs comparison with that of the mirror CPC for Nottingham was analyzed. Results show that the improved lens-walled CPC has a higher optical performance for actual building application.