Sources and patterns of polycyclic aromatic hydrocarbons pollution in kitchen air,China

Twelve polycyclic aromatic hydrocarbons, multi-ringed compounds known to be carcinogenic in air of six domestic kitchens and four commercial kitchens of China were measured in 1999-2000. The mean concentration of total PAHs in commercial kitchens was 17 microg/m3, consisting mainly of 3- and 4-ring PAHs, and 7.6 microg/m3 in domestic kitchens, where 2- and 3-ring PAHs were predominant, especially naphthalene. The BaP levels in domestic kitchens were 0.0061-0.024 microg/m3 and 0.15- 0.44 microg/m3 in commercial kitchens. Conventional Chinese cooking methods were responsible for such heavy PAHs pollution. The comparative study for PAH levels in air during three different cooking practices: boiling, broiling and frying were conducted. It was found that boiling produced the least levels of PAHs. For fish, a low-fat food, frying it produced a larger amount of PAHs compared to broiling practice, except pyrene and anthracene. In commercial kitchens, PAHs came from two sources, cooking practice and oil-fumes, however the cooking practice had a more predominant contribution to PAHs in commercial kitchen air. In domestic kitchens, except for cooking practice and oil-fumes, there were other PAHs sources, such as smoking and other human activities in the domestic houses, where 3-4 ring PAHs mainly came from cooking practice. Naphthalene (NA, 2-ring PAHs) was the most predominant kind, mostly resulting from the evaporation of mothball containing a large quantity of NA, used to prevent clothes against moth. A fingerprint of oil-fumes was the abundance of 3-ring PAHs. Heating at the same temperature, the PAHs concentrations in different oil-fumes were lard > soybean oil > rape-seed oil. An increase in cooking temperature increased the levels of PAHs, especially acenaphthene.     

Incorporating sorption/desorption of organic pollutants into river water quality model

Preliminary research was conducted about how to incorporate sorption/desorption of organic pollutants with suspended solids and sediments into single-chemical and one-dimensional water quality model of Jinghang Canal.Sedimentation-resuspension coefficient k3 was deduced; characteristics of organic pollutants, concentrations and components of suspended solids/sediments and hydrological and hydraulic conditions were integrated into k3 and further into river water quality model; impact of sorption/desorption of organic pollutants with suspended solids and sediments on prediction function of the model was discussed. Results demonstrated that this impact is pronounced for organic pollutants with relatively large Koc and Kow, especially when they are also conservative and foc of riversuspended solids/sediments is high, and that incorporation of sorption/ desorption of organic pollutants into river water quality model can improve its prediction accuracy.     

Multi-process and multi-pollutant control technology for ultra-low emissions in the iron and steel industry

The iron and steel industry is not only an important foundation of the national economy, but also the largest source of industrial air pollution. Due to the current status of emissions in the iron and steel industry, ultra-low pollutant emission control technology has been researched and developed. Liquid-phase proportion control technology has been developed for magnesian fluxed pellets, and a blast furnace smelting demonstration project has been established to use a high proportion of fluxed pellets (80%) for the first time in China to realize source emission reduction of SO₂ and NO_x. Based on the characteristics of high NO_x concentrations and the coexistence of multiple pollutants in coke oven flue gas, low-NO_x combustion coupled with multi-pollutant cooperative control technology with activated carbon was developed to achieve efficient removal of multiple pollutants and resource utilization of sulfur. Based on the characteristics of co-existing multiple pollutants in pellet flue gas, selective non-catalytic reduction (SNCR) coupled with ozone oxidation and spray drying adsorption (SDA) was developed, which significantly reduces the operating cost of the system. In the light of the high humidity and high alkalinity in flue gas, filter materials with high humidity resistance and corrosion resistance were manufactured, and an integrated pre-charged bag dust collector device was developed, which realized ultra-low emission of fine particles and reduced filtration resistance and energy consumption in the system. Through source emission reduction, process control and end-treatment technologies, five demonstration projects were built, providing a full set of technical solutions for ultra-low emissions of dust, SO₂, NO_x, SO₃, mercury and other pollutants, and offering technical support for the green development of the iron and steel industry.     

微机上冲裁CAD系统的开发

此文介绍了一套在微机上开发的冲裁CAD系统。它以Foxbase作为数据库管理系统,Trubo C为编程语言,能进行冲裁件图形输入与显示、工艺性分析、优化单排排样和选择板材规格、冲裁件尺寸识别和模具刃口尺寸计算、冲裁力和压力中心计算、以及凹模周界尺寸计算等。本系统主界面为下拉式菜单界面,全中文提示,人机界面友好,具有较好的可扩充性和容错性。     

齿形零件的冷摆辗成形

介绍了摆辗成形工艺的基本原理,综述了齿形零件冷摆辗精密成形和摆动辗压设备研制的概况.指明用压力加工方法,特别是冷摆辗工艺.加工精密齿形可提高零件机械性能,节能节材.     

Scanning proton microprobe microanalysis for the assessment of homogeneity of IAEA urban dust reference materials

In order to develop new reference materials for microanalytical nuclear techniques, scanning proton microprobe(SPM) technique was used to determine homogeneity level within 100x200 μm2 micro-area on the small pieces of IAEA urban dust reference materials. The experimental methods were described in detail. The results show that IAEA-396A/M Vienna urban dust is homogeneous enough for small sample analysis of standard reference material (SRM).     

环境保护纳入小康和现代化评价指标体系探析

结合江苏省实例，对环境保护具体纳入小康和现代化评价指标体系的机遇，难点和方法进行了探讨。     

常压非平衡等离子体条件下CO2的转化

研究常温常压下,脉冲电晕等离子体对温室气体ＣＯ２的活经与轮,分别考究了纯ＣＯ２气体,ＣＯ２－Ｈ２,ＣＯ２－ＣＨ４体系中ＣＯ２的轮。纯ＣＯ２气体放电,ＣＯ２主要分解为ＣＯ和Ｏ２,ＣＯ的选择性在７０％以上,随着脉冲电压峰值的增加,ＣＯ２转化率,ＣＯ２产率有所提高。     

皮革废水物化处理工艺整改的试验研究

在扬州某皮革厂原有的废水处理设施基础上，采用浓淡分流，药剂调整等方法。对其物化处理部分进行整改。结果表明，用Fe2SO4作混凝剂处理浓废水及用复合混凝剂处理淡废水，效果较好。处理后，可减少排放废水CODcr约1252t／a。处理成本从原来的4.03元／t降到1.30元／t。同时，降低了加药量的控制难度与加药频率，减轻了工人的劳动强度。     

Deriving freshwater quality criteria of sulphocyanic sodium for the protection of aquatic life in China

ＤｅｒｉｖｉｎｇｆｒｅｓｈｗａｔｅｒｑｕａｌｉｔｙｃｒｉｔｅｒｉａｏｆｓｕｌｐｈｏｃｙａｎｉｃｓｏｄｉｕｍｆｏｒｔｈｅｐｒｏｔｅｃｔｉｏｎｏｆａｑｕａｔｉｃｌｉｆｅｉｎＣｈｉｎａＺｈａｎｇＴｏｎｇＤｅｐａｒｔｍｅｎｔｏｆＥｎｖｉｒｏｎｍｅｎｔａｌＥ...