Monitoring method for airborne glymes and its application in fuel exhaust emission measurement.

A monitoring method based on solvent extraction of adsorbed target glymes followed by gas chromatograph-mass spectrometry GC-MS analysis was developed for seven glymes, namely ethylene glycol dimethyl ether, propylene glycol dimethyl ether, ethylene glycol diethyl ether, diethylene glycol dimethyl ether, diethylene glycol diethyl ether, triethylene glycol dimethyl ether, and tetraethylene glycol dimethyl ether. The best recoveries of target glymes were achieved when using a combination of sample collection medium of graphitised carbon black (GCB) with a solvent mixture of methylene chloride and methanol (95/5, v/v). Method detection limits ranged from 1.5 microg/m3 for diethylene glycol diethyl ether to 13.2 microg/m3 for ethylene glycol diethyl ether based on a sample volume of 3.4 1. Using this method, diethylene glycol dimethyl ether and diethylene glycol diethyl ether were detected and measured successfully in diluted vehicle exhausts in diesel fuel engine tests.     

Effect of external potassium (K) supply on the uptake of 137Cs by spring wheat (Triticum aestivum cv. Tonic): a large-scale hydroponic study.

A large-scale hydroponic experiment was carried out in a non-controlled greenhouse. Spring wheat plants were grown to maturity at four levels of external K concentration (2, 4, 20 and 40 mgl(-1)) and one concentration of radiocaesium (8 Bqml(-1)). Concentrations of K and radiocaesium in the growth solution were closely monitored, and replenishments were made upon depletion. K effectively competed with radiocaesium in terms of root uptake. Activity concentrations of radiocaesium in plants differed significantly between the four K treatments; the activity concentration at the lowest external K concentration being 100 times higher than that at the highest K level. The relationship between radiocaesium uptake and external K level could be described by a negative power function; this showed that when the K level reached around 12 mgl(-1), further increases in the external K level resulted only in slight changes in its inhibitory effect. As a result of this inhibitory effect of potassium supply, concentrations of radiocaesium in plant tissues, grains in particular, were greatly reduced at high external K concentration. Mechanisms involved in Cs-K interaction in root uptake are also discussed.     

水库溃坝损失及其计算方法研究

主要研究水库渍坝损失及其计算方法．分析了水库溃坝及其损失的特点，提出了溃坝洪水淹没损失的直接经济损失的实物型损失与收益型损失、间接经济损失、非经济损失的内容及其计算方法，并探讨了库区坍岸损失与清决工程损失计算方法．     

增强信心不辱使命--记全国安全生产工作会议

2002年1月15日至16日,全国安全生产工作会议在北京西郊宾馆召开。国务院副总理、国务院安全生产委员会主任吴邦国为大会做了批示:2002年安全生产任务更十分艰巨悄有松懈,安全事故又会大幅度上升。大会安排了新闻发布会,国家安全生产监督管理局局长张宝明、副局长闪淳昌等领导同志回答了记者提问。     

China''''s CDM Policies and Their Development Implications:Major Concerns for CDM Implementation

Most CDM (Clean Development Mechanism) opportunities exist in some large industrializing developing countries. For instance, China is estimated to take 48% of the world potential for CDM project activities. In reality, however, the share by China over the CDM projects registered and CDM projects in the pipeline is less than 10% as of Auguest 2005. This paper will examine the reasons behind, as reflected in China's CDM policies. Further investigation will be made into the use of these policies to boost the country's sustainable development, the sustainable development implications and effects of these policies. In addition, it is noted that incompatibility of some other Chinese laws and policies can be responsible for the low level and slow pace of CDM implementation in China and some suggestions are offered for promoting CDM project activities in China. There also exist barriers at the international level that impedes implementation of CDM project activities. A conclusion is drawn that CDM policies in a developing country like China aim mainly at promotion of sustainable development and to a lesser extent the generation of CERs.     

Rapid decolorization of Acid Orange II aqueous solution by amorphous zero-valent iron

Some problems including low treatment capacity, agglomeration and clogging phenomena, and short working life, limit the application of pre-treatment methods involving zero-valent iron (ZVI). In this article, ZVI was frozen in an amorphous state through a melt-spinning technique, and the decolorization effect of amorphous ZVI on Acid Orange II solution was investigated under varied conditions of experimental variables such as reaction temperature, ribbon dosage, and initial pH. Batch experiments suggested that the decolorization rate was enhanced with the increase of reaction temperature and ribbon dosage, but decreased with increasing initial solution pH. Kinetic analyses indicated that the decolorization process followed a first order exponential kinetic model, and the surface-normalized decolorization rate could reach 2.09 L/(m². min) at room temperature, which was about ten times larger than any previously reported under similar conditions. Recycling experiments also proved that the ribbons could be reused at least four times without obvious decay of decolorization rate and efficiency. This study suggests a tremendous application potential for amorphous ZVI in remediation of groundwater or wastewater contaminated with azo dyes.     

Three-dimensional hydrodynamic and water quality model for TMDL development of Lake Fuxian, China

Lake Fuxian is the largest deep freshwater lake in China. Although its average water quality meets Class I of the China National Water Quality Standard (CNWQS), i.e., GB3838-2002, monitoring data indicate that the water quality approaches the Class II threshold in some areas. Thus it is urgent to reduce the watershed load through the total maximum daily load (TMDL) program. A three-dimensional hydrodynamic and water quality model was developed for Lake Fuxian, simulating flow circulation and pollutant fate and transport. The model development process consists of several steps, including grid generation, initial and boundary condition configurations, and model calibration processes. The model accurately reproduced the observed water surface elevation, spatiotemporal variations in temperature, and total nitrogen (TN), total phosphorus (TP), and chemical oxygen demand (COD) concentrations, suggesting a reasonable numerical representation of the prototype system for further TMDL analyses. The TMDL was calculated using two interpretations of the water quality standards for Class I of the CNWQS based on the maximum instantaneous surface and annual average surface water concentrations. Analysis of the first scenario indicated that the TN, TP and COD loads should be reduced by 66%, 68% and 57%, respectively. Water quality was the highest priority; however, local economic development and cost feasibility for load reduction can pose significant issues. In the second interpretation, the model results showed that, under the existing conditions, the average water quality meets the Class I standard and therefore load reduction is unnecessary. Future studies are needed to conduct risk and cost assessments for realistic decision-making.     

AMBBR工艺处理城市污水

通过对厌氧移动床生物膜反应器处理南方热带亚热带地区城市生活污水的试验研究,采用好氧-厌氧两个阶段进行挂膜试验以缩短挂膜时间,探讨了水力停留时间(HRT)、pH值、填料填充率对反应器处理效果的影响。试验结果表明:在HRT为12 h,进水ρ(COD)为300 mg/L,ρ(氨氮)为15 mg/L,50%的填料填充率,pH=7的工艺条件下,装置对COD去除率为51.2%,对氨氮去除率为40.8%,对TN去除率为38.1%。