环介导等温扩增技术(LAMP)检测人星状病毒方法的建立及其在再生水检测中的应用

为快速高效地检测人星状病毒,建立了一种新的试验方法——环介导等温扩增技术(loop-mediated isothermal amplification technology,LAMP),并对人星状病毒LAMP反应条件进行了优化.结果表明,镁离子终浓度为4 mmol·L-1、甜菜碱终浓度为1mol.L-1的25μL体系下...     

Assessment of heavy metals in some wild edible mushrooms collected from Yunnan Province, China

Eight heavy metals (Cu, Zn, Fe, Mn, Cd, Cr, Ni, and Pb) in 14 different wild-growing edible mushroom species (Coprinus comatus, Voluariella volvacea, Pleurotus nebrodensis, Hypsizigus marmoreus, Hericium erinaceus, Agrocybe aegerita, Lenfinus edodes, Collybia velutipes, Agaricus bisporus, Russula albida, Clitocybe conglobata, Pleurotus eryngii, Lepista sordida, and Pleurotus ostreatus) collected from Yunnan province, China, were determined by inductively coupled plasma-atomic emission spectrometry after microwave digestion. All element concentrations were determined on a dry weight basis. The ranges of element concentrations for copper, zinc, iron, manganese, cadmium, chromium, nickel, and lead were 6.8-31.9, 42.9-94.3, 67.5-843, 13.5-113, 0.06-0.58, 10.7-42.7, 0.76-5.1, and 0.67-12.9 mg/kg, respectively. In general, iron content was higher than other metals in all mushroom species. The levels of zinc, cadmium, and lead in some edible mushroom samples were found to be higher than legal limits. The relative standard deviations were found below 10%. The accuracy of procedure was confirmed by certified reference material.     

Spectrophotometric determination of persulfate by oxidative decolorization of azo dyes for wastewater treatment

Persulfate can efficiently decolorize azo dyes through oxidizing these compounds, which enabled us to develop a method of rapid spectrophotometric determination of persulfate for monitoring the wastewater treatment on the basis of the oxidation decolorization of azo dyes. Four azo dyes with different molecular structures were investigated as probes, and the influences of operation parameters including reaction time, solution pH, initial dye concentration, and initial concentration of activator Fe(2+) were checked on the determination of persulfate. Under optimum conditions, the decolorization degree of the dyes responded linearly with persulfate concentration for all the four azo dyes, and the linear range and detection limit were found to be 2.0-150 μmol L(-1) and 0.62 μmol L(-1) for rhodamine B, 2.0-100 μmol L(-1) and 0.42 μmol L(-1) for methylene blue, 4.0-150 μmol L(-1) and 0.50 μmol L(-1) for methyl violet, and 20-150 μmol L(-1) and 8.1 μmol L(-1) for orange II. A persulfate treatment of a spiked wastewater sample was satisfactorily monitored with the new method.     

Characterization of ambient black carbon and wood burning particles in two urban areas

Previously it has been suggested that certain organic aerosol components of wood smoke have enhanced ultraviolet absorption at 370 nm relative to 880 nm in two-wavelength aethalometer measurements. This enhanced absorption could serve as an indicator of wood burning particles. Two-wavelength (370 nm and 880 nm) aethalometer measurements were made at urban sites in Rochester, New York and Laredo, Texas from August 1 to December 31, 2009 and from December 23, 2007 to January 2, 2008, respectively. In Rochester, Delta-C (UVBC(370 nm)- BC(880 nm)) values were higher by a factor of 3 during the night than during the day in November and December when residential wood burning was common. In Laredo, particularly high Delta-C values were observed on Christmas Eve and New Year's Eve and were attributed to biomass burning and firework emissions. Exponential decay was found to be a good estimator for predicting BC concentrations at different wind speeds regardless of wind directions.     

Multi-process and multi-pollutant control technology for ultra-low emissions in the iron and steel industry

The iron and steel industry is not only an important foundation of the national economy, but also the largest source of industrial air pollution. Due to the current status of emissions in the iron and steel industry, ultra-low pollutant emission control technology has been researched and developed. Liquid-phase proportion control technology has been developed for magnesian fluxed pellets, and a blast furnace smelting demonstration project has been established to use a high proportion of fluxed pellets (80%) for the first time in China to realize source emission reduction of SO₂ and NO_x. Based on the characteristics of high NO_x concentrations and the coexistence of multiple pollutants in coke oven flue gas, low-NO_x combustion coupled with multi-pollutant cooperative control technology with activated carbon was developed to achieve efficient removal of multiple pollutants and resource utilization of sulfur. Based on the characteristics of co-existing multiple pollutants in pellet flue gas, selective non-catalytic reduction (SNCR) coupled with ozone oxidation and spray drying adsorption (SDA) was developed, which significantly reduces the operating cost of the system. In the light of the high humidity and high alkalinity in flue gas, filter materials with high humidity resistance and corrosion resistance were manufactured, and an integrated pre-charged bag dust collector device was developed, which realized ultra-low emission of fine particles and reduced filtration resistance and energy consumption in the system. Through source emission reduction, process control and end-treatment technologies, five demonstration projects were built, providing a full set of technical solutions for ultra-low emissions of dust, SO₂, NO_x, SO₃, mercury and other pollutants, and offering technical support for the green development of the iron and steel industry.     

Programmed cell death induced by modified clay in controlling Prorocentrum donghaiense bloom

Modified clay (MC), an effective material used for the emergency elimination of algal blooms, can rapidly reduce the biomass of harmful algal blooms (HABs) via flocculation. After that, MC can still control bloom population through indirect effects such as oxidative stress, which was initially proposed to be related to programmed cell death (PCD) at molecular level. To further study the MC induced cell death in residual bloom organisms, especially identifying PCD process, we studied the physiological state of the residual Prorocentrum donghaiense. The experimental results showed that flocculation changed the physiological state of the residual cells, as evidenced by growth inhibition and increased reactive oxygen species production. Moreover, this research provides biochemical and ultrastructural evidence showing that MC induces PCD in P. donghaiense. Nuclear changes were observed, and increased caspase-like activity, externalization of phosphatidylserine and DNA fragmentation were detected in MC-treated groups and quantified. And the mitochondrial apoptosis pathway was activated in both MC-treated groups. Besides, the features of MC-induced PCD in a unicellular organism were summarized and its concentration dependent manner was proved. All our preliminary results elucidate the mechanism through which MC can further control HABs by inducing PCD and suggest a promising application of PCD in bloom control.     

Isolation and characterization of a strain with high microbial attachment in aerobic granular sludge

Aerobic granule is a special microbial aggregate associated with biofilm structure. The formation of aerobic granular sludge is primarily depending on its bacterial community and relevant microbiological properties. In this experiment, a strain with high microbial attachment was isolated from aerobic granular sludge, and the detailed characteristics were examined. Its high attachment ability could reach 2.34 (OD_600nm), while other low attachment values were only around 0.06-0.32, which indicated a big variation among the different bacteria. The strain exhibited a very special morphology with many fibric fingers under SEM observation. A distinctive behaviour was to form a spherical particle by themselves, which would be very beneficial for the formation and development of granular sludge. The EPS measurement showed that its PN content was higher than low attachment bacteria, and 3D-EEM confirmed that there were some different components. Based on the 16S rRNA analysis, it was identified to mostly belong to Stenotrophomonas. Its augmentation to particle sludge cultivation demonstrated that the strain could significantly promote the formation of aerobic granule. Conclusively, it was strongly suggested that it might be used as a good and potential model strain or chassis organism for the aerobic granular sludge formation and development.     

气相色谱／质谱（GC／MS）联用在我国大气有机污染监测中的应用

概述ＧＣ／ＭＳ联用在我国大气有机污染监测中的应用，介绍大气中有机污染物，如多环芳烃、硝基多环芳烃、多氯二苯并二恶英、多氯二苯并呋喃、碳氢化合物、苯系物、恶臭、有机硫化合物、多组分有机污染物的测定。     

基于SBR反应器的ANAMMOX工艺的启动运行

采用SBR反应器,接种好氧硝化污泥,在142 d内于较高负荷下成功启动了厌氧氨氧化反应器.反应器总氮容积负荷(以N计)为0.43 kg/m3·d,总氮去除率最高达到93.3%,平均为80.5%;氨氮和亚硝酸盐氮的去除率最高达到93.9%和99.8%,平均去除率为81.2%和85.7%.在稳定运行阶段,氨氮去除量、亚硝酸盐氮去除量、硝酸盐氮生成量三者之间的比值为1:1.38:0.18.反应器启动过程中,出水、进水pH差值的变化趋势由负到正,然后稳定在一定范围内;且污泥性状有较大变化,污泥中微生物所占比率有所提高,整个反应器中适应厌氧氨氧化运行方式的菌种增殖较快.