WHO-IRC和IAEA-AQCS国际比对样品的γ谱分析

报道了本实验室１９９１－１９９４年间参加ＷＨＯ－ＩＲＣ和ＩＡＥＡ－ＡＱＣＳ组织的环境样品放射性测量国际化对工作。用２台ＨＰＧｅγ谱仪,相对方法和效率曲线方法测量了土壤样品,用自吸收校正方法测量了生物样品。对ＷＨＯ－ＩＲＣ Ｎｏ．５７Ｖｉ３００号样品,在２８个报出实验室中,本实验室测量值与推荐值的平均相对偏差最小,为３．０４％。     

秋季典型光化学污染过程的分析

通过一个月的Ｏ３－ＮＯｘ同步观测和有关气象资料的分析,研究了光化学污染特点和及其和气象的关系,发现秋季的光化学污染过程,既有冬夏两季局地源产生和积累的机制,也有春季外来源造成的高浓度Ｏ３污染特点。Ｏ３的最大浓度和日最大值平均浓度分别为１６８．７μｇ／ｍ＾３和１１４．８μｇ／ｍ＾３。     

机物料中溶解性有机质对土壤吸附除草剂的抑制作用

溶解性有机质(DOM)是陆地及水生生态系统中十分活跃的组分,对有机污染物质的环境行为 (如毒性、迁移转化及生物可降解性等)有着重要的影响,而施用有机物料会释放大量的DOM.采用批量平衡法研究了水稻秸秆腐解产生的溶解性有机质对苄嘧磺隆(BSM)在土壤中吸附行为的抑制作用.结果表明,线性方程能很好地描述BSM在土壤中的吸附行为;添加DOM降低了BSM在土壤中的分配系数即logKd值,其logKd值与对照(不加DOM)间存在极显著差异(P<0.01),秸秆腐解时间越长,logKd值越小;亲水组分和疏水组分在DOM抑制土壤吸附BSM中起着不同的作用;BSM在土壤上的吸附自由能小于40 kJ·mol-1,推测BSM在土壤上主要以物理吸附为主,吸附机理可能有范德华力、疏水键、氢键和偶极键力,不存在化学键吸附作用.     

珠三角城市群典型城市土壤邻苯二甲酸酯污染特征

选择了经济相对发达的珠江三角洲城市群中的典型中小城市的菜园和果园表层土壤(0～20 cm)进行调查取样,采用气相色谱法,对土壤样品中的16种邻苯二甲酸酯(PAEs)进行了测定,分析了其分布特征,并初步探讨了本区域的PAEs的污染控制问题.结果表明:在珠三角城市中,东莞土壤的PAEs含量最高,各地土壤中的PAEs均值高低顺序依次为东莞＞深圳(珠海)＞中山(惠州);菜园土壤中的平均PAEs含量比果园高37%左右;从珠三角城市菜地和果园的平均PAEs分布来看,东莞和深圳的菜地PAEs明显高于果园;珠海、中山和惠州菜地的平均PAEs与果园基本持平.16种PAEs类化合物在珠江三角洲不同城市的分布的差异非常大,不同城市所受到的主要PAEs化合物污染的种类不同;与美国土壤PAEs控制标准相比,珠三角城市果园和菜地土壤的PAEs主要为DEP和DnBP超标,这两类PAEs化合物应该成为重点的污染控制对象.     

Discovery of emerging organic pollutants in the atmosphere through an omics approach

● We review the framework of discovering emerging pollutants through an omics approach. ● High-resolution MS can digitalize atmospheric samples to full-component data. ● Chemical features and databases can help to translate untargeted data to compounds. ● Biological effect-directed untargeted analyses consider both existence and toxicity. Ambient air pollution, containing numerous known and hitherto unknown compounds, is a major risk factor for public health. The discovery of harmful components is the prerequisite for pollution control; however, this raises a great challenge on recognizing previously unknown species. Here we systematically review the analytical techniques on air pollution in the framework of an omics approach, with a brief introduction on sample preparation and analysis, and in more detail, compounds prioritization and identification. Through high-resolution mass spectrometry (HRMS, typically coupled with chromatography), the complicated environmental matrix can be digitalized into “full-component” data. A key step to discover emerging compounds is the prioritization of compounds from massive data. Chemical fingerprints, suspect lists and biological effects are the most vital untargeted strategies for comprehensively screening critical and hazardous substances. Afterward, compressed data of compounds can be identified at various confidence levels according to exact mass and the derived molecular formula, MS libraries, and authentic standards. Such an omics approach on full-component data provides a paradigm for discovering emerging air pollutants; nonetheless, new technological advancements of instruments and databases are warranted for further tracking the environmental behaviors, hence to evaluate the health risk of key pollutants.     

吸附增效低温等离子体法去除甲苯废气的研究

采用150Hz中频高压交流电源作为低温等离子体发生源,选用典型的微孔γ-Al2O3球形颗粒吸附剂(以下简称γ-Al2O3)作为等离子体反应器填充材料,协同低温等离子体法催化降解甲苯废气。考察了在不同条件下,γ-Al2O3的甲苯吸脱附效果和吸附增效低温等离子体法的甲苯去除效果。结果表明,甲苯降解反应主要发生在γ-Al2O3的表面,甲苯的去除率在一定的浓度范围内与γ-Al2O3表面吸附的甲苯量成正比关系;填充γ-Al2O3有利于提高甲苯去除率及等离子体反应器能量利用率;γ-Al2O3对臭氧的降解表现出一定的促进作用。     

加油站地下储油罐压力管理系统的相关研究

在当前普遍采用的加油站真空辅助式第二阶段油气回收系统中,为了避免回收到地下储油罐中的油气再次通过P/V阀排空,必须对其中气相空间的压力实施有效控制。从国外的发展情况来看,地下储油罐的压力管理系统主要分为基于膜分离技术、基于弹性气囊和基于活性炭吸附三大类,其中膜法油气回收装置在国内已经得到了较多关注。首次系统介绍了气囊式压力管理系统的工作原理及其主要结构设计,具体包括管线布局、钢制压力容器壳体、位于容器顶部封头上的接口组件和全部位于容器内的气囊等;同时对另外一种可行方案进行了分析。     

改性氧化铝微波诱导催化氧化处理高浓度苯酚废水的研究

采用微波诱导催化氧化技术,以改性氧化铝为催化剂,对高浓度模拟苯酚废水进行氧化处理。考察了微波功率、催化剂投加量、H202投加量、废水pH值和微波反应时间等因素对苯酚去除效果的影响。实验结果表明,处理30mL质量浓度为1 100mg/L的苯酚模拟废水,在微波功率500W,催化剂加入量1 g(液固比30∶1),30％双氧水...     

Elevated atmospheric deposition and dynamics of mercury in a remote upland forest of southwestern China

Mt. Gongga area in southwest China was impacted by Hg emissions from industrial activities and coal combustion, and annual means of atmospheric TGM and PHg concentrations at a regional background station were 3.98 ng m⁻³ and 30.7 pg m⁻³, respectively. This work presents a mass balance study of Hg in an upland forest in this area. Atmospheric deposition was highly elevated in the study area, with the annual mean THg deposition flux of 92.5 μg m⁻² yr⁻¹. Total deposition was dominated by dry deposition (71.8%), and wet deposition accounted for the remaining 28.2%. Forest was a large pool of atmospheric Hg, and nearly 76% of the atmospheric input was stored in forest soil. Volatilization and stream outflow were identified as the two major pathways for THg losses from the forest, which yielded mean output fluxes of 14.0 and 8.6 μg m⁻² yr⁻¹, respectively.     

Nationwide monitoring of atmospheric PCDD/Fs and dioxin-like PCBs in South Korea

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) were measured in ambient air samples collected from different parts of South Korea in 2008, and the measured levels were used for assessing the spatial and temporal distribution of atmospheric PCDDFs and DL-PCBs in South Korea. The average concentrations of atmospheric PCDD/Fs and DL-PCBs among the 37 sites were 28 fg I-TEQ m⁻³ (ND ∼ 617) and 1 fg WHO-TEQ m⁻³ (ND ∼ 0.016). Elevated atmospheric levels of PCDD/Fs and DL-PCBs observed at residential/industrial sites and in the north-west of Korea, indicated a potential contribution and impacts of anthropogenic sources of PCDD/Fs and DL-PCBs. These levels were similar or lower than those previously reported in other ambient air surveys. Average concentrations of PCDD/Fs showed small seasonal variations (ANOVA analysis, p = 0.144). The highest concentrations of PCDD/Fs were observed during winter, followed by spring, autumn and summer. Atmospheric PCDD/Fs and DL-PCBs in South Korea rapidly decreased during the last 10 years (1998-2008), demonstrating the efficiency of stricter regulations and the application of best available technologies/best environmental practices at emission sources. Comparison of the congener profiles and principal component analysis showed that current atmospheric PCDD/Fs are mostly influenced by industrial sources and PCBs from old commercial PCB uses. Nationwide POPs monitoring will continue and allows an effective evaluation of the implementation of the Stockholm Convention on POPs.