联用技术在砷形态分析中的研究进展

摘要：目前用于元素砷的形态分析技术主要是色谱与原子光谱、质谱等的联用,最常用的是HPLC与ICP—OES、ICP—MS的联用,方法准确可靠,灵敏度高,但是不能提供砷化合物的分子结构信息。因此以色谱一电喷雾质谱（ESI—MS）的联用作为定性分析的主要手段,但是ESI—MS灵敏度低,易受基体干扰,因此需要复杂的前处理技术。     

Adsorption of mercury on laterite from Guizhou Province, China

The adsorption behaviors of Hg(Ⅱ) on laterite from Guizhou Province,China,were studied and the adsorption mechanism was discussed.The results showed that different mineral compositons in the laterite will cause differences in the adsorption capacity of laterite to Hg(Ⅱ).Illite and non-crystalloids are the main contributors to enhancing the adsorption capacity of laterite to Hg(Ⅱ).The pH of the solution is an important factor affecting the adsorption of Hg(Ⅱ) on laterite.The alkalescent environment (pH 7-9) ...     

焦化污水焚烧技术的可行性及前景分析

随着西部大开发的脚步,北方地区焦化行业的日渐壮大,很多小焦化企业纷纷关停,取而代之的是大规模的焦化企业。大规模焦化企业的发展可以以新带老,改善超标排放的现状,对保护当地环境起到积极作用,对焦化行业的规范运行也是个好的开始。然而不管规模如何壮大,焦化行业始终面临的一个严峻的问题就是污水排放问题。以前老套的污水处理难度大,效果差。现在出现了一种新的焦化废水处理工艺-污水焚烧技术。它作为处理焦化废水的另一种方法,其效果与可行性很具有研究价值。     

丙烯腈催化剂生产过程危害因素识别与控制

介绍了丙烯腈催化剂生产过程中的危害因素识别过程,并依据其危害的风险度提出应对措施,控制和减少丙烯腈催化剂生产过程中的风险.     

水质模型参数识别与验证的探讨

参数识别与模型验证是水质模型应用的两个重要步骤。在对模型参数的本质含义进行辨析的基础上,对模型参数的时变性、集成性和可识别性进行了分析。采用科学哲学的方法,对水质模型验证的必要性和不足进行了讨论,指出虽然模型验证必不可少,但也不能证实模型本身就是实际物理和生化过程的反映,因此应充分地意识到“经过验证的”模型在预测中的风险。     

粒状电介质形态对介质阻挡放电特性的影响

选取自制高岭土颗粒和氧化铝颗粒作为介质阻挡放电的电介质,并将其作为板-板式气体放电填充床反应器的填充材料,通过对反应器放电特性的实验研究。研究了电场强度、李萨如图形、放电功率以及电流脉冲情况,初步探讨了粒状电介质阻挡放电机制。并从粒径、成分、排序三个角度进行了结果分析,进而总结这三方面因素对气体放电的影响规律。     

膜生物反应器内污泥增长规律的研究

研究了不同进水有机物浓度下MBR反应器的污泥增长和活性变化的规律,并确定了本系统三个运行阶段活性污泥增长的动力学系数（Yg和ms）。结果表明,MBR长时间不排泥和低负荷的运行方式会使污泥的活性下降和微生物种群的改变,在低负荷下运行时会出现污泥的负增长。根据经典的微生物能量代谢理论并结合各个运行阶段污泥浓度的变化情况计算得到进水COD300、180和120mg／L下MBR的Yg和ms的值,分别为0．42、0．39、0．24（gVSSgCOD^-1）和0．11、0．06、0．08（gCODgVSS^-1day^-1）。     

金属尾矿制备生物陶粒的研究

阐述了利用江西某金属矿的尾矿、炉渣、粉煤灰制备一种多孔滤料陶粒的方法。实验结果表明：粒径5—30mm、粒子密度1．5-2．5g．／cm^3堆积密度0．65-1．3g／cm^3、比表面积7．2-13．5m^2／g、酸可溶率〈0．7％、筒压强度6．5-9．1MPa、吸水率0．1％～5％的陶粒质轻多孔,比表面积大,附着的微生物量大,孔隙率高,微生物挂膜快,老化生物膜易脱落。     

Prospering Revolution of Resource Efficiency in Northeast Industrial Area in China

Abstract

Despite its strong advantages in resource, technology and human resource, China's Northeast Industrial Area is also experiencing problems of unreasonable industrial structure, environmental pollution, and the degradation of ecological condition, etc., which prevent this area from achieving a sustainable development. Through analyzing the resource problem, the present paper proposed a strategy of circular economy for the prosperity of this are, discussed the theories of circular economy and resource recycling, and finally concluded that improving resource productivity is at the core of circular economy.     

Empirically Analysis of the CO2 Emissions Embodied in Exports of China

Abstract

In this paper, using the input-output model, the author first calculated the CO₂ emissions embodied in exports of China in 2002 and 2007. Then, the author empirically analyzed problems existing in the composition of exported products and analyzed its possible reasons. The research results of this paper are as follows: Since China’s entry into WTO, the CO₂ emissions embodied in exports of China have been increasing rapidly; the value of exported products of high-carbon emissions industries accounts for a relatively higher proportion to China’s total exports value because China’s carbon intensive products have a certain competitive advantage. Additionally, this paper has put forward relevant suggestions based on these results.