Real-time fluorescent quantitative immuno-PCR method for determination of fluoranthene in water samples with a molecular beacon

A reliable and sensitive competitive real-time fluorescent quantitative immuno-PCR (RTFQ-IPCR) assay using a molecular beacon was developed for the determination of trace fluoranthene (FL) in the environment. Under optimized assay conditions, FL can be determined in the concentration range from 1 fg/mL to 100 ng/mL, with y = 0.194x + 7.859, and a correlation coe cient of 0.967 was identified, with a detection limit of 0.6 fg/mL. Environmental water samples were successfully analyzed, recovery was between 90% and 116%, with intra-day relative standard deviation (RSD) of 6.7%–12.8% and inter-day RSD of 8.4%–15.2%. The results obtained from RTFQ-IPCR were confirmed by ELISA, showing good accuracy and suitability to analyze FL in field samples. As a highly sensitive method, the molecular beacon-based RTFQ-IPCR is acceptable and promising for providing reliable test results to make environmental decisions.     

Production of a newly isolated Paenibacillus polymyxa biocontrol agent using monosodium glutamate wastewater and potato wastewater

A phyllosphere bacterial strain EBL-06 was isolated from wheat leaves. The morphology, cultural characteristics, phospholipid fatty acids, physiological and antagonistic fungus activities of this strain were investigated. A phylogenetic tree was constructed by comparing with the published 16S rDNA sequences of the relevant bacteria. The results showed that the isolate EBL-06 was a strain of Paenibacillus polymyxa; this strain performed a high level of antagonistic fungus activity toward a broad spectrum of phytopathogens, such as Botrytis cinerea, Cladosporium cucumerinum, Fusarium spp. The isolate EBL-06 can grow well using monosodium glutamate wastewater (MGW) and potato wastewater (PW) as culture medium. The maximum yield of 6.5 × 10 9 CFU/mL of the isolate EBL-06 anti-fungus biocontrol agent was reached in 15 hr cultivation at 28°C, pH 6.0–7.5 using the mixture of MGW and PW (1:9).     

高等学校危险化学品的安全管理

为加强高等学校危险化学品的规范化管理,保证教学和科研实验工作安全有序地进行,根据已出现的实验室事故,结合近年来危化品智能化管理成果和已出台的安全管理规范,提出高等学校危险化学品规范化管理的建议和措施.采取切实可行的规范化管理制度、监管信息化平台和实质性的管控手段,必将大大降低危险化学品引起的风险,减少或杜绝事故的发生,保证教学和科研的有序进行.事实表明,以上措施可以大大提高实验室安全管控的水平.     

Numerical evaluation of the effectiveness of NO2 and N2O5 generation during the NO ozonation process

Wet scrubbing combined with ozone oxidation has become a promising technology for simultaneous removal of SO₂ and NO_x in exhaust gas. In this paper, a new 20-species, 76-step detailed kinetic mechanism was proposed between O₃ and NO_x. The concentration of N₂O₅ was measured using an in-situ IR spectrometer. The numerical evaluation results kept good pace with both the public experiment results and our experiment results. Key reaction parameters for the generation of NO₂ and N₂O₅ during the NO ozonation process were investigated by a numerical simulation method. The effect of temperature on producing NO₂ was found to be negligible. To produce NO₂, the optimal residence time was 1.25 sec and the molar ratio of O₃/NO about 1. For the generation of N₂O₅, the residence time should be about 8 sec while the temperature of the exhaust gas should be strictly controlled and the molar ratio of O₃/NO about 1.75. This study provided detailed investigations on the reaction parameters of ozonation of NO_x by a numerical simulation method, and the results obtained should be helpful for the design and optimization of ozone oxidation combined with the wet flue gas desulfurization methods (WFGD) method for the removal of NO_x.     

基于功能安全标准的安全仪表系统可靠性评估软件

介绍了以功能安全国际标准IEC61508和IEC61511工程应用要求为依据,集安全仪表系统的安全仪表功能安全完整性等级(SIL)分配、安全要求规范(SRS)制定、SIL验证、可靠性数据管理等多功能为一体的安全仪表系统可靠性专用评估软件。     

传感技术用于甲醛测定的研究

甲醛是一种重要的工业原料,在化工、食品、建材等方面有着广泛的应用。由于甲醛毒性大,且被怀疑具有致癌作用,目前已被认为是工厂区和室内空气中最重要的污染物之一。随着人们对空气污染的日益关注,对甲醛的准确及时检测显得更加重要。基于传感器技术而研制出的甲醛测定仪,让我们看到传感技术运用于甲醛测定领域的发展前景。本文就测定甲醛的传感器技术如电化学传感器、光化学传感器、金属氧化物传感器、电子鼻以及声表面波式传感器的一些重要应用进行了阐述。     

芳香烃清洁硝化催化剂

综述了国内外有关芳香烃硝化过程中替代硫酸的催化剂的研究进展;介绍了沸石类催化剂、粘土类催化剂、离子交换树脂催化剂、固载化液体酸催化剂、金属氧化物及金属盐催化剂、杂多酸催化剂以及固体超强酸催化剂的合成及催化效率与优缺点.     

低pH值对大型溞（Daphnia magna Straus）存活、生长和生殖的影响

在静置换水条件下,研究了低pH值对大型存活、生长和生殖的影响。结果表明,在25±1℃下,急性试验低pH值对大型的24h和48hLL50值及其95％可信限分别为pH值4.66±0.19和4.94±0.20。慢性试验进行了14天,对存活和生长,pH值1.75有影响,pH值5.0没有影响;对生殖,pH值5.0有影响,pH值5.5没有影响。显示出低pH值对大型的毒性阈限在pH值5.00－5.50之间。     

气相色谱法测定固定污染源废气中氯甲基甲醚和二氯甲基醚的研究

氯甲基甲醚(CMME)和二氯甲基醚(BCME)属于确认人类致癌物,因此,建立精准、绿色的CMME和BCME检测分析方法十分必要。基于2,4,6-三氯苯酚+乙醇钠+乙醇衍生化体系,利用气相色谱法(电子捕获检测器)测定了固定污染源废气中的CMME和BCME,并且系统地优化了采样条件、衍生化条件,确定了衍生化产物的结构及衍生比率。结果表明：工作曲线相关系数均大于0.990;当采样量为10 L时,检出限均为0.003 mg/m³;当实际样品加标量分别为0.010、0.100、1.00 mg/m³时,测定结果的相对标准偏差分别为15%～16%、8.9%～13%、10%～11%,加标回收率分别为89.2%～90.8%、75.3%～78.6%、76.5%～77.2%。     

东北玉米热量指数预测方法研究(Ⅲ)——GM(1,1)预测方法

GM(1,1)是开展时间序列环境要素变化趋势预测的有效方法之一。通过对东北地区玉米热量指数的分析,建立了热量指数时间变化趋势的GM(1,1)预测模型,各模型的平均预测精度虽低于逐步回归统计模型,但也都达91%以上,可以应用该模型的预测结果指导农业生产。