Removal of Volatile Organic Compounds from polluted air

Volatile Organic Compounds (VOCs) are among the most common air pollutants emitted from chemical, petrochemical, and allied industries. VOCs are one of the main sources of photochemical reaction in the atmosphere leading to various environmental hazards; on the other hand, these VOCs have good commercial value. Growing environmental awareness has put up stringent regulations to control the VOCs emissions. In such circumstances, it becomes mandatory for each VOCs emitting industry or facility to opt for proper VOCs control measures. There are many techniques available to control VOCs emission (destruction based and recovery based) with many advantages and limitations. Therefore, deciding on a particular technique becomes a difficult task. This article illustrates various available options for VOCs control. It further details the merits, demerits and applicability of each option. The authors hope that this article will help in critically analysing the requirements and accordingly decide on the appropriate strategy to control VOCs.     

Metals and metalloid bioconcentrations in the tissues of Typha latifolia grown in the four interconnected ponds of a domestic landfill site

The uptake of metals in roots and their transfer to rhizomes and above-ground plant parts (stems, leaves) of cattails (Typha latifolia L.) were studied in leachates from a domestic landfill site (Etueffont, France) and treated in a natural lagooning system. Plant parts and corresponding water and sediment samples were taken at the inflow and outflow points of the four ponds at the beginning and at the end of the growing season. Concentrations of As, Cd, Cr, Cu, Fe, Mn, Ni and Zn in the different compartments were estimated and their removal efficiency assessed, reaching more than 90% for Fe, Mn and Ni in spring and fall as well in the water compartment. The above- and below-ground cattail biomass varied from 0.21 to 0.85, and 0.34 to 1.24 kg dry weight/m², respectively, the highest values being recorded in the fourth pond in spring 2011. The root system was the first site of accumulation before the rhizome, stem and leaves. The highest metal concentration was observed in roots from cattails growing at the inflow of the system''s first pond. The trend in the average trace element concentrations in the cattail plant organs can generally be expressed as: Fe > Mn > As > Zn > Cr > Cu > Ni > Cd for both spring and fall. While T. latifolia removes trace elements efficiently from landfill leachates, attention should also be paid to the negative effects of these elements on plant growth.     

Separation and determination of trace levels of aromatic amines by HPLC

Aromatic amines were analysed by normal phase and reverse phase high performance liquid chromatography employing silica gel and octadecyl silane (ODS) columns, respectively. A number of mobile phases were used. The results obtained on silica gel column were compared with those achieved on reverse phase column. Excellent results were obtained on ODS and shoulder peaks were eliminated when a mixture of methyl alcohol and sodium perchlorate was used as mobile phase.     

Combined Non-Catalytic Reduction of NOx and SO2 by Ammonia Liquor during Staged Fluidized-Bed Combustion

Emissions of NOx and SO2 were monitored in the presence of ammonia liquor in a 0.09 m2 and 2 m high stainless-steel fluidized-bed combustor. Experiments were carried out at 2 m/s fluidizing velocity, 40% excess air, and 870 °C bed temperature. Ammonia liquor with 7% ammonia by weight was injected into the freeboard of the combustor 52 cm above the distributor through a water-cooled injector. A 65 : 34 primary/secondary air ratio was maintained throughout the investigation. Approximately 70% of NO and 20% of SO2 was reduced at an NH3/NO molar ratio of 2 : 1, respectively. However, a higher reduction in SO2 emissions (62%) was achieved at a very high NH3/NO molar ratio of 7 : 1. These experiments showed that ammonia addition did have a significant effect in SO2 reduction if injected in an excess amount. The injection of ammonia liquor combined with staged combustion was found to be very effective in reducing NOx emissions. A reduction of about 50% was achieved at an NH3/NO molar ratio of 0.6 : 1 which is also coupled with a very low level of ammonia in the flue.     

Use of fungi for the bioconversion of rice straw into cellulase enzyme

Cellulase production was carried out by solid state bioconversion (SSB) method using rice straw, a lignocellulosic material and agricultural waste, as the substrate of three Trichoderma spp. and Phanerochaete chrysosporium in lab-scale experiments. The results were compared to select the best fungi among them for the production of cellulase. Phanerochaete chrysosporium was found to be the best among these species of fungi, which produced the highest cellulase enzyme of 1.43 IU/mL of filter paper activity (FPase) and 2.40 IU/mL of carboxymethylcellulose activity (CMCase). The "glucosamine" and "reducing sugar" parameters were observed to evaluate the growth and substrate utilization in the experiments. In the case of Phanerochaete Chrysosporium, the highest glucosamine concentration was 1.60 g/L and a high concentration of the release of reducing sugar was measured as 2.58 g/L obtained on the 4th day of fermentation. The pH values were also recorded. The range of the pH was about 5.15 to 5.56 in the case of Phanerochaete Chrysosporium.     

Preconcentration and determination of lead and cadmium levels in blood samples of adolescent workers consuming smokeless tobacco products in Pakistan

The present study was aimed to evaluate the cadmium (Cd) and lead (Pb) levels in the blood samples of adolescent boys, chewing different smokeless tobacco (SLT) products in Pakistan. For comparative purpose, boys of the same age group (12–15 years), not consumed any SLT products were selected as referents. To determine trace levels of Cd and Pb in blood samples, a preconcentration method, vortex-assisted liquid–liquid microextraction (VLLME) has been developed, prior to analysis by flame atomic absorption spectrometry. The hydrophobic chelates of Cd and Pb with ammonium pyrrolidinedithiocarbamate were extracted into the fine droplets of ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate, while nonionic surfactant, Triton X-114 was used as a dispersing medium. The main factors affecting the recoveries of Cd and Pb, such as concentration of APDC, centrifugation time, volume of IL and TX-114, were investigated in detail. It was also observed that adolescent boys who consumed different SLT products have 2- to 3-fold higher levels of Cd and Pb in their blood samples as compared to referent boys (p?<?0.001).     

Simulation of mixing depths incorporating the urban heat island effect

The main objective of this paper was to establish the effect of anthropogenic heat flux on the formation of mixing depth specially in urban areas. In this study an energy balance mixing depth model was developed for the simulation of mixing depth incorporating the heat island effect. To demonstrate the effect of heat island, mixing depths were simulated under two conditions. Under the first condition, hourly gridded anthropogenic heat flux and variant surface characteristics were considered, while under the second condition anthropogenic heat flux term was ignored and constant surface characteristics were considered throughout the modelling domain. The release of anthropogenic heat flux in the urban environment was found to be responsible for the growth of the unstable layer in the lower atmosphere even during the night. This resulted in higher mixing depth values in urban areas compared to the surrounding countryside. The maximum differential surfaces sensible heat flux between urban and rural areas was estimated as 130 W/m². From the simulation of mixing depth, it was revealed that the maximum increment in mixing depth in urban areas was 300 m due to the heat island effect. This increment in mixing depth in urban areas can provide an extra space for dilution and mixing of pollutants.     

Effect of vehicle exhaust on the quantity of polycyclic aromatic hydrocarbons (PAHs) in soil

PAHs are formed during the incomplete combustion of organic substances containing carbon and hydrogen and are one of the first atmospheric pollutants identified as carcinogens. Most of the PAH environmental burden is found in the soil (95%). Soil samples collected from different roadsides were analyzed for seven polycyclic aromatic hydrocarbons (PAHs). The quantitative and qualitative analysis was carried out by UV Spectrophotometer. The individual PAH value ranged from 0.1 to 18.0 mg/kg. Phenenthrene and Pyrene were found to be the most abundant compounds. Vehicle emissions are the principal source of PAH in the Roadside soils. The highest concentration was found at site S2 (Hasthtnagri Roadside) which shows the highest traffic density.