Sludge granulation and e ciency of phase separator in UASB reactor treating combined industrial e uent

Sludge granulation and the effect of gas-liquid-solid separator （GLSS） design on the efficiency of upflow anaerobic sludge blanket （UASB） and upflow anaerobic sludge filter （UASF） reactors, operating at HRTs ranging from 3 to 12 h was investigated. VSS/TS ratio gradually increased in both the reactors with increasing sludge age （from 0.5 to more than 0.7 for UASB reactor and 0.012 to 0.043 for UASF reactor）. X-Ray diffraction analysis of the UASF sludge showed the presence of expanding clays revealing its additional absorption capability. Fuoraphyllite and albite precipitation related to excellular polymers of the microbial shell structure, showed the extended growth of microorganisms during sludge granulation. A gradual decrease （82%-69%） in COD removal with decreasing HRT was apparent in UASF reactor. In case of UASB reactor, this decrease was marginal because addition of GLSS device significantly improved （14%-20%） the overall efficiency of the UASB reactor. GLSS enhanced the efficiency of the UASB reactor by increasing the settleability of suspended particles and accelerating the coagulation of colloidal particles due to the velocity gradient.     

Development of Water-Borne Green Polymer Used as a Potential Nano Drug Vehicle and its In Vitro Release Studies

This paper describes an ecofriendly development of a nanodrug delivery vehicle from seed oil. The entire synthesis, starting from the ZnO nanoparticle to the polymeric vehicle is purely microwave assisted with minimal usage of organic solvents. Multifunctional features like enhanced UV absorbance, antimicrobial properties and appreciable in vitro release can be attributed to the nanoparticle loaded polymeric vehicle. Characterization of the synthesized species was done through FT-IR, ¹HNMR, SEM and XRD. The physical characterizations were carried out using conventional laboratory techniques.     

Fabrication and Characterization of Biodegradable Composite Films Made of Using Poly(caprolactone) Reinforced with Chitosan

Chitosan was dissolved in 2?% aqueous acetic acid solution and the films were prepared by solution casting. Values of tensile strength (TS), tensile modulus (TM), elongation at break (Eb?%) and water vapor permeability (WVP) of the chitosan films were found to be 30?MPa, 450?MPa, 8?% and 4.7?g?mm/m²?day?kPa, respectively. Poly(caprolactone) (PCL) films were prepared from its granules by compression molding and the values of TS, TM, Eb and WVP were 14?MPa, 220?MPa, 70?% and 1.54?g?mm/m²?day?kPa, respectively. PCL was reinforced with chitosan films, and composite films were prepared by compression molding. Amount of chitosan in the composite films varied from 10 to 50?% (w/w). It was found that with the incorporation of chitosan films in PCL, both the values of TS and TM of composite films increased significantly. The highest mechanical properties were found at 50?% (w/w) of chitosan content. The Oxygen transmission rate (OTR) of composite film was found to decrease significantly than PCL films. Thermal properties of the composite were also improved as compared to PCL. The water uptake test of the composite also showed promising results with a good stability of composite films. The interface of the composite was investigated by scanning electron microscopy and showed good interfacial adhesion between PCL and chitosan films.     

Elevated blood lead levels and cytogenetic markers in buccal epithelial cells of painters in India

Background, aim, and scope  

Lead, a major contaminant, is highly used in paint manufacturing due to its anticorrosive properties. Recent reports indicated high lead content among Indian paints used for commercial purposes. Painters are continuously exposed to these lead containing paints during painting of both commercial as well as residential buildings. Lead is well-known for its genotoxicty in occupational workers; however, in Indian painters the genotoxic effects of lead have not been reported to date. Therefore we aimed to study the genotoxic end points in painters due to their long-term exposure to these high lead-containing Indian paints.     

A simple ligandless microextraction method based on ionic liquid for the determination of trace cadmium in water and biological samples

A simple and efficient ionic liquid-based ligandless microextraction method has been developed for preconcentration of cadmium ions (Cd²⁺) as a step prior to its determination by flame atomic absorption spectrometry (FAAS) with a micro-sample introduction system. In this approach, the ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate [C₄mim][PF₆] and ethanol were used as extractant and dispersive solvents to preconcentrate the Cd²⁺ in different waters, acid digested scalp hair, and nail samples. Some analytical parameters influencing the extraction efficiency of Cd²⁺ and its subsequent determination, including pH, IL volume, dispersant solvent volume, sample volume, temperature, incubation time, and matrix effect, were optimized. Under optimal conditions, the limit of detection (LOD), limit of quantification (LOQ), and enhancement factor (EF) were 0.4 μg L^?1, 1.3 μg L^?1, and 50, respectively. The relative standard deviation (RSD) of 100 μgL^?1 Cd²⁺ was 4.3% (n = 6). The validity of the proposed method was checked by determining Cd²⁺ in certified reference material (TM-25.3 fortified water) and standard addition; the results showed sufficient recovery (>98%) of Cd²⁺ within the certified value. The method was applied for preconcentration and determination of cadmium in waters and biological samples.     

An analysis of reciprocal exchange of helping behavior in the red-cockaded woodpecker (Picoides borealis)

We examine the frequency of reciprocal exchanges of helping behavior in three red-cockaded woodpecker populations to determine if such exchanges might constitute a significant fitness benefit of helping. Specifically, we determine how often helpers, once they become breeders, are assisted by young they previously helped raise. The estimated frequencies of reciprocal exchange of helping based on survival and status transition probabilities are low (2%). Observed frequencies of reciprocity are significantly higher than estimated frequencies in two of the three populations studied, suggesting that male fledglings more often remain on their natal territory as helpers if another helper is already present. High rates of retention of young males as helpers on high-quality territories or preferential helping of kin, as well as preferential helping of former care-givers, might explain this result. When the analysis is restricted to helpers unrelated to the young they help raise, which controls for preferential helping of kin and largely eliminates effects of territory quality, empirical estimates of the frequency of reciprocity do not differ from estimates calculated from population demography. We conclude that young males do not preferentially help former care-givers and that reciprocal exchange of help is not an important factor in the evolution of helping behavior in the red-cockaded woodpecker. In this species, all known benefits of helping behavior are indirect (i.e., derived through kin selection ) rather than direct. We discuss the occurrence of unrelated helpers in this context. Received: 10 August 1999 / Received in revised form: 13 February 2000 / Accepted: 19 February 2000     

The effect of air mass origin on the ambient concentrations of Be and Pb in Islamabad, Pakistan

Concentration of radionuclides ²¹⁰Pb and ⁷Be, having half lives of 22.3 years and 53.29 days, respectively, in the surface air samples of Islamabad (33.38° N, 73.10° E and Altitude ∼536 m asl.) are measured. The non-destructive technique of gamma-spectrometry, with a high purity germanium HPGe detector, was employed for the analysis of all samples. The annual average concentrations of ²¹⁰Pb and ⁷Be in the surface air samples were determined as 0.284 ± 0.15 and 3.171 ± 1.14 mBq m⁻³, respectively. Our results have shown a seasonal variation of the concentration of ⁷Be in air samples with high values for the spring season. High concentrations for ²¹⁰Pb are obtained when air masses originate from plain areas of Pothohar region, located in the South-West, West and North West of Islamabad. Our values of concentrations show a nice agreement with the relevant reported results.     

Effect of Urea on the Mechanical Properties of Gelatin Films Photocured with 2-Ethylhexyl Acrylate

Thin films of gelatin were prepared by casting. Then the films were photocured and the mechanical properties were studied. The tensile strength of UV cured gelatin films showed about 10% enhancement than that of raw gelatin films. Minor amount of urea (1–5%) was used as additive in aqueous gelatin solution and films were prepared using same technique. Four formulations were prepared in methanol with 2-ethylhexyl acrylate in the presence of photoinitiator (darocur-1664). The films were soaked in the prepared formulations and then cured under UV radiation at different intensities (5–25 passes). Percentage of urea, monomer concentration, soaking time and radiation intensities were optimized with the extent of polymer loading, TS and elongation at break of the photocured film. The films containing 2% urea, cured with 3% EHA for 3 min at 15th UV pass showed the highest mechanical properties. A significant improvement of TS (31%) occurred when EHA (3%) was incorporated.     

Effect of lead on the sorption of 2,4,6-trichlorophenol on soil and peat

The effect of lead on the sorption of 2,4,6-trichlorophenol (2,4,6-TCP) on soil and peat was investigated using a batch equilibration method. Lead markedly diminished the sorption of 2,4,6-TCP, and 2,4,6-TCP had little effect on lead sorption. Peat was a more effective adsorbent for 2,4,6-TCP than soil. The desorption hysteresis of 2,4,6-TCP verified the presence of high-energy sorption sites. Mechanisms of lead suppression effect on the 2,4,6-TCP sorption included the following: Firstly, lead accelerated the aggregation of colloids, the aggregates covered the surface in part and shrunk the pore sizes of the adsorbents, hence decreased the sorption of 2,4,6-TCP. Secondly, X-ray absorption and Fourier transform infrared spectroscopy study suggested that lead competed with 2,4,6-TCP for carboxylic, phenolic and Si-OH groups of organic matter and clay minerals. Such competition was partly responsible for the overall suppression effect of lead on the sorption of 2,4,6-TCP.     

Accuracy of bottled drinking water label content

The accurate predictions of ground ozone concentrations are required for proper management, control, and making public warning strategies. Due to the difficulties in handling phenomenological models that are based on complex chemical reactions of ozone production, neural network models gained popularity in the last decade. These models also have some limitations due to problems of overfitting, local minima, and tuning of network parameters. In this study, the predictions of daily maximum ozone concentrations are attempted using support vector machines (SVMs). The comparison between the accuracy of SVM and neural network predictions is performed to evaluate their performance. For this, the daily maximum ozone concentration data observed during 2002–2004 at a site in Delhi is utilized. The models are developed using the available meteorological parameters. The results indicated the promising performance of SVM over neural networks in predicting daily maximum ozone concentrations.