Factors influencing cannibalism in the wolf spider Pardosa agrestis (Araneae, Lycosidae)

Cannibalistic tendencies are well known in spiders and may be a significant factor influencing population size. The wolf spider, Pardosa agrestis, is the dominant non-web-building spider in a wide range of central European agricultural habitats. Preliminary field observations indicated an extended reproductive period, which results in a very wide size distribution of juvenile instars. We hypothesised that if cannibalism is enhanced by differences in size, especially during periods when prey is scarce, these populations might be susceptible to cannibalism in an ecologically significant way. Laboratory studies were conducted on juvenile P. agrestis in arenas. We analysed the following specific aspects of cannibalism: (1) the effect of the weight ratio between the opponents; (2) the effect of weight per se, and (3) the role of hunger level in determining cannibalistic tendencies of spiders. The role of weight and hunger were analysed in separate experiments, in both cases by controlling for the other variable. The results showed that cannibalism was strongly positively correlated with both weight ratio and hunger, but absolute size/age of an individual could not predict the occurrence of a cannibalistic event. These experiments generated the plausible hypothesis that cannibalism might be an important phenomenon in the regulation of real populations, which should be tested specifically in future field experiments. Received: 15 December 1997 / Accepted after revision: 10 October 1998     

Low paternity in the hornet Vespa crabro indicates that multiple mating by queens is derived in vespine wasps

Queen mating frequency was studied in the European hornet, Vespa crabro, by analyzing four DNA microsatellite loci in 20 workers from each of 14 nests. Queens were found to be predominantly singly mated (9/14), although double (4/14) and triple mating (1/14) also occurred. For most multiply mated queens, paternity was significantly biased with the majority male fathering on average 80% of the female offspring. The population-wide effective mating frequency was therefore low (1.11), and sister-sister relatedness high (0.701 ± 0.023 SE). Low effective mating frequency in Vespa, in combination with data from other vespines, suggests that high paternity frequency is derived in the group. Some problems with the non-detection of fathers, where the queen was not sampled or shared alleles with males, are analyzed. Received: 16 November 1998 / Received in revised form: 29 March 1999 / Accepted: 12 April 1999     

Megabenthic decapod crustacean assemblages on the Galician continental shelf and upper slope (north-west Spain)

The structure of megabenthic decapod crustacean assemblages on the Galician (north-west Spain) continental shelf (100 to 200 depth) and upper slope (200 to 500 m) was analyzed based on surveys carried out in autumn and spring, from 1980 to 1987. Forty species belonging to 19 families were caught. The portunid crab Polybius henslowii, a species with pelagic phases, was the most abundant species, but displayed strong spatial and temporal fluctuations. Other dominant species were the Norway lobster Nephrops norvegicus, the portunid Liocarcinus depurator, the galatheids Munida intermedia and M. sarsi, and the shrimps Solenocera membranacea, Plesionika heterocarpus, Pasiphaea sivado and Dichelopandalus bonnieri. Total abundance and biomass (average values excluding Polybius henslowii = 255 individuals and 2.06 kg/30 min tow) and species richness and diversity, H′ (6.85 species and H′ = 1.45 per tow) displayed a significant positive correlation with depth, and strong interannual fluctuations. The factors determining community organization were depth and, to a lesser extent, spatial structure. There was clear evidence of bathymetric zonation, differentiating between species characteristic of the slope (D. bonnieri and Pasiphaea sivado), shelf-slope edge (Macropipus tuberculatus, Pontophilus spinosus, Munida sarsi, S. membranacea, Processa spp.) and shelf (L. depurator, Macropodia tenuirostris, Paguridae and Chlorotocus crassicornis). The spatial zonation was related to changes in oceanography and sediment along the continental margin. Goneplax rhomboides, N. norvegicus, C. crassicornis and Alpheus glaber are benthic species which generally exhibit burrowing behaviour, and they were found mainly in the southern area where there are fine sediments due to the outwelling from the Rías Baixas. Different benthopelagic shrimps (Pontophilus spinosus, Plesionika heterocarpus,Processa spp. and Pasiphaea sivado) were typical of the zone just north of Fisterra, characterized by a convergence of water masses bringing about an increase in productivity due to upwelling. The benthic anomuran and brachyuran crabs Munida intermedia, M.␣sarsi, L.␣depurator and Macropipus tuberculatus were characteristic of the northwestern zone between Fisterra and Estaca, where the infauna reaches high biomass despite coarser sediments with a lower concentration of organic material than in the southern area. Lastly, both the Paguridae and Macropodia tenuirostris were species typically found in the waters in the northern shelf. Based on interannual changes in assemblage structure, two periods could be distinguished: between 1980 and 1984, when Polybius henslowii, D. bonnieri and Pasiphaea sivado had abundance peaks; and another period from 1985 to 1987 when L. depurator, Munida intermedia, M.␣sarsi and Macropipus tuberculatus increased in abundance. Received: 21 May 1996 / Accepted: 9 August 1996     

Relation of RNA/DNA ratios to growth for the scallop Euvola (Pecten) ziczac in suspended culture

We examined the relation of RNA/DNA ratios to growth for three size groups of the tropical scallop Euvola ziczac maintained in suspended culture at 8, 21 and 34 m in depth in the Golfo de Cariaco, Venezuel. Various growth parameters indicated that production decreased with depth. This was more likely due to a decrease in seston quality with depth than to temperatures or seston abundance (which were similar at the various depths studied). The RNA/DNA ratio was correlated with the G-index of muscle growth for juveniles (r ²=0.55). A much weaker correlation was observed for the maturing scallops (r ²=0.18), probably because of the interaction between reproductive and somatic growth. In fully mature scallops, somatic growth was negligible and the RNA/DNA ratios appeared to be inversely related to the level of physiological stress of the scallops. Whereas RNA/DNA ratios are difficult to interpret for maturing E. ziczac, because an increased ratio can be due to either increased gonadal or somatic growth, they are useful in predicting growth in juveniles and physiological stress in fully mature scallops.     

Proposal for the integration of decentralised composting of the organic fraction of municipal solid waste into the waste management system of Cuba

Municipal solid waste (MSW) generation and management in Cuba was studied with a view to integrating composting of the organic fractions of MSW into the system. Composting is already included as part of the environmental strategy of the country as an appropriate waste management solution. However, no programme for area-wide implementation yet exists. The evaluation of studies carried out by some Cuban and international organisations showed that organic matter comprises approximately 60-70% of the MSW, with households being the main source. If all organic waste fractions were considered, the theoretical amount of organic waste produced would be approximately 1 Mio. Mg/a, leading to the production of approximately 0.5 Mio. Mg/a of compost. Composting could, therefore, be a suitable solution for treating the organic waste fractions of the MSW. Composting would best be carried out in decentralised systems, since transportation is a problem in Cuba. Furthermore, low technology and low budget composting options should be considered due to the problematic local economic situation. The location for such decentralised composting units would optimally be located at urban agricultural farms, which can be found all over Cuba. These farms are a unique model for sustainable farming in the world, and have a high demand for organic fertiliser. In this paper, options for the collection and impurity-separation in urban areas are discussed, and a stepwise introduction of source-separation, starting with hotel and restaurant waste, is suggested. For rural areas, the implementation of home composting is recommended.     

Influence of Technological Process on Biodegradation of PVA/Waxy Starch Blends in an Aerobic and Anaerobic Environment

Improving biodegradability of PVA/starch blends is a reality already documented by a number of works. Admittedly, mechanical properties of products (for example, tensile strength) are somewhat worse, but suitable composition optimizing or chemical modifying of starch may eliminate the problem to a large degree. This work is an attempt to find another potential effect influencing biodegradability, that of technological procedure for producing films from these blends on an extruder. The procedure with a so-called pre-extrusion step (two-stage) and dry-blend (single-stage) produced blends of slightest differences in achieved biodegradability (virtually within limits of experimental error) in aerobic (76 vs. 79%) as well as anaerobic breakdown (48 vs. 52%). Conversely, morphological analysis exhibited superior homogeneity of films prepared by the two-stage process; their tensile strength was also higher.     

Blends of HDPE wastes: study of the properties

In this work we have analysed the properties of blends of recycled high-density polyethylene (HDPE) filled with talc. We have used two kinds of polymer matrices. The first one came entirely from ground injection moulded parts whereas the second was bimodal, incorporating 80% of the previous HDPE and 20% of recycled HDPE coming from bottles. We have also used two kinds of commercial talc characterized by a medium particle size of 2 microm and 10 microm, respectively. The amount of talc added to both matrices weighed of 10% and 20%. With regards to the mechanical properties of the analysed composites, greater values of Young's modulus and break stresses were found using a smaller particle size and higher talc content. On the other hand, the combination of the two HDPEs with very different viscosities produced a notable increase in the strain at break and in the absorbed energy; both measured at high and low strain rates. Despite the differences in viscosities between the two HDPEs, we did not observe separation of phases during either the processing or testing. Under impact loading, the higher energy absorption in the composites was observed when the finest talc grade with a 10% content weight was added to the bimodal matrix.     

Leaching of metals from fly ashes in the presence of complexing agents

The leachability of some metals (Al, As, Ba, Ca, Cr, Cu, Fe, K, Mg, Mn, Ti, Zn) from fly ashes was studied in the presence of ethylenediamine tetraacetic acid (EDTA) and naturally occurring complexing agents-humic acids (HAs). Secondary complex-forming equilibria taking place in the leachates increase significantly the leached amounts of most metals. Kinetic experiments showed that almost the whole "available" amounts of metals are leached from fly ash within a time period of several hours (mostly within 20 h), with exceptions of matrix constituents (typically aluminium), which are released more slowly.     

Effects of Alkali Treatment on the Properties of Short Flax Fiber–Poly(Lactic Acid) Eco-Composites

In this study, the influence of alkali (NaOH) treatment on the mechanical, thermal and morphological properties of eco-composites of short flax fiber/poly(lactic acid) (PLA) was investigated. SEM analysis conducted on alkali treated flax fibers showed that the packed structure of the fibrils was deformed by the removal non-cellulosic materials. The fibrils were separated from each other and the surface roughness of the alkali treated flax fibers was improved. The mechanical tests indicated that the modulus of the untreated fiber/PLA composites was higher than that of PLA; on the other hand the modulus of alkali treated flax fiber/PLA was lower than PLA. Thermal properties of the PLA in the treated flax fiber composites were also affected. T_g values of treated flax fiber composites were lowered by nearly 10 °C for 10% NaOH treatment and 15 °C for 30% NaOH treatment. A bimodal melting behavior was observed for treated fiber composites different than both of neat PLA and untreated fiber composites. Furthermore, wide angle X-ray diffraction analysis showed that the crystalline structure of cellulose of flax fibers changed from cellulose-I structure to cellulose-II.     

One-Component Spray Polyurethane Foam from Liquefied Pinewood Polyols: Pursuing Eco-Friendly Materials

The use of petroleum-derived products should be avoided regarding the principles of green and sustainable chemistry. The work reported herein, is aimed at the liquefaction of pine shavings for the production of an environmentally-friendly polyol suitable to be used in the formulations of sprayable polyurethane foams. The biopolyols were obtained in high yield and were used to replace those derived from fossil sources, to produce more “greener” polyurethane foams and therefore, less dependent on petroleum sources, since the polyol component was substituted by products resulting from biomass liquefaction. The partial and fully exchange of the polyols was accomplished, and the results compared with a reference foam. The foams were afterward, chemical, physical, morphological, and mechanically characterized. The complete replacement of polyether polyol and polyol polyester has presented some similar characteristics as that used as a reference, validating that the path chosen for the development of more sustainable materials is on the right track for the contribution to a cleaner world.