东洞庭湖湿地生态系统健康状态与水位关系研究

基于CBERS卫星遥感影像数据,以东洞庭湖国家级自然保护区为研究区,通过光谱特征分析建立决策树分类模型,提取东洞庭湖湿地的地物类型。以生态系统健康理论为基础,依据东洞庭湖湿地的特点,综合湿地生产力、组织结构、弹性和功能4个方面,建立湿地生态系统健康状态评价指标体系和评价模型,利用GIS技术,分析东洞庭湖湿地在2000～2006年10个时相的生态系统健康状态。结合城陵矶水文站的水位数据,探讨了东洞庭湖湿地健康状态与城陵矶水位之间的相关性,并利用2007年两个时相的数据进行检验。研究结果表明：东洞庭湖湿地健康状态与城陵矶水位之间存在着较大的相关性,当城陵矶水位达到30 m左右时,东洞庭湖湿地健康状态达到最佳值     

Enhanced nitrogen removal upon the addition of volatile fatty acids from activated sludge by combining calcium peroxide and low-thermal pretreatments

This study investigated a combined low-thermal and CaO₂ pretreatment to enhance the volatile fatty acid (VFA) production from waste activated sludge (WAS). The fermentative product was added to a sequencing batch reactor (SBR) as an external carbon source to enhance nitrogen removal. The results showed that the combined pretreatment improved WAS solubilization, releasing more biodegradable substrates, such as proteins and polysaccharides, from TB-EPS to LB-EPS and S-EPS. The maximum VFA production of 3529 ± 188 mg COD/L was obtained in the combined pretreatment (0.2 g CaO₂/g VS + 70 °C for 60 min), which was 2.1 and 1.4-fold of that obtained from the sole low-thermal pretreatment and the control test, respectively. Consequently, when the fermentative liquid was added as an external denitrification carbon source, the effluent total nitrogen decreased to Class A of the discharge standard for pollutants in rural wastewater treatment plants in most areas of China.     

国投新登煤矿生产过程中的节能减排措施与实践

在统计矿井生产系统动力分布和能耗状况的基础上,对各种耗能设备的节能技术改造及其节能潜力进行了重点分析.变频控制、软启动、物流传感器智能控制等技术,是该矿节能技术改造的主要手段,具有显著的节能性和经济性.对于煤矸石、煤矿废水、矿井瓦斯的回收和利用,也作了节能减排分析.     

排水管道沉积物控制的研究进展

排水管道沉积物雨天受冲刷而造成的河湖水体污染,已成为当前我国水环境质量持续改善面临的困境之一。深入了解管道沉积物及其沉积机制对水体污染治理至关重要。综述了管道沉积物的形成与特性,微生物或沉积物中胞外聚合物(extracellular polymeric substance,EPS)的主要组分和相关性质对沉积物抗冲刷特性的影响。结果显示:排水管道沉积物主要是由污水携带的固体颗粒发生沉降而形成,主要包含底层粗颗粒沉积物、有机层和生物膜3类。由于沉积物中富含微生物并可分泌EPS,而EPS的黏性能显著增加管道沉积物的抗冲刷性。通过控制或降解沉积物EPS中的多糖组分,可降低沉积物的抗冲刷性能,有望为控制管道沉积物淤积提供新思路。目前国内外控制管道沉积物淤积的方法主要包括离线和在线水力冲刷或机械清淤。今后的研究方向应着力在真实的排水管网中系统地研究沉积物耐冲刷特性及其影响因素,进而提出更为有效的控制技术。     

铁矿石对脱除烧结废气中NOx的催化效应

向混合料中加添加剂能够在烧结过程中脱除烧结废气中的NO。实验研究了铁矿石对NO脱除反应的催化效应。在900℃下,分别以5种不同铁矿石作为填料层,用2种标准气体和压缩空气配制的混合气体模拟烧结废气。试验结果表明,铁矿石种类对铁矿石的催化能力有重要影响。D型铁矿的催化能力最强而且不会发生弱化,NO转化率接近100%;其它几种铁矿石的催化能力较差,随着反应时间的延长有明显的弱化现象,但很快即基本趋于稳定状态,NO转化率达到了60%~70%。     

The effects of air pollution on the lung cancer mortality in rural areas of eastern China: a multi-region study

Environmental Science and Pollution Research - Recently, the burden of lung cancer (LC) has attracted global attention. Meanwhile, LC has become the leading cause of death in China. Many studies...     

Preparation of in-situ nitrogen-doped lignin-based porous carbon and its efficient adsorption of chloramphenicol in water

Porous carbon is an excellent absorbent for pollutants in water. Here, we report a breakthrough in performance of porous carbon based on lignin prepared using sodium lignosulfonate (SLS), potassium carbonate and melamine as precursor, activator and nitrogen source, respectively. A series of characterization tests confirmed that in-situ nitrogen doping greatly enhanced porous structure, resulting in a specific surface area of 2567.9 m² g^?1 and total pore volume of 1.499 cm³ g^?1, which is nearly twice that of non-nitrogen-doped porous carbon. Moreover, adsorption experiments revealed that at 303 K, the saturated adsorption capacity of chloramphenicol was as high as 713.7 mg g^?1, corresponding to an improvement of 33.7%. Further, the prepared porous carbon exhibited a strong anti-interference against metal ions and humic acid. The adsorption process was confirmed to be an endothermic reaction dominated by physical adsorption, indicating that an increase in temperature is conducive to adsorption. The results of this study show that nitrogen-doped lignin-based porous carbon prepared by in-situ doping is a promising material to significantly alleviate water pollution owing to its low cost, excellent pore structure and good adsorption properties.

     

典型涂料制造企业VOCs排放量核算与排放特征分析

采集了上海地区8家不同类型的涂料制造企业中不同生产环节有组织排放的废气样本,分析其VOCs组分特征和活性VOCs物种,并应用3种实际排放量核算方法计算企业的VOCs年排放量,分析了其与排污许可排放量的关系。结果表明：1)涂料制造行业排放废气的特征组分为芳香烃、OVOCs、卤代烃,占全部VOCs质量浓度的56.2%~99.1%,乙酸乙酯、乙酸丁酯、4-乙基甲苯、间/对二甲苯、甲苯、甲乙酮是涂料制造行业VOCs排放的典型物种;2)基于MIR值法的计算结果,芳香烃和OVOCs是涂料制造行业排放VOCs的主要活性组分,累计OFP贡献率达36.0%~99.8%,其中,4-乙基甲苯(52.1%)、氯乙烯(48.1%)、乙酸丁酯(47.9%)、乙酸乙酯(42.6%)、间/对二甲苯(41.3%)是各类涂料工艺废气中OFP贡献率最高的物质,除苯系物、乙酸酯类化合物外,氯乙烯、甲乙酮、四氢呋喃也是涂料制造过程中值得关注的活性物质;3)涂料制造企业车间的有组织废气VOCs排放量占全厂VOCs排放量的75.0%以上,其次是实验室废气,VOCs排放量为3.5%~16.8%。在VOCs实际排放量核算中,使用实测法的核算结果与物料衡算法接近,且计算简便,在正常运行时均低于许可排放限值;而产污系数法所核算数值较许可排放限值更高,在现阶段可作为一项惩罚性计算方法。     

铯污染土壤的淋洗修复及淋洗液的回收

核电站事故造成的土壤放射性核素污染会给环境和人群造成极大的健康风险.通过批量实验,研究了不同淋洗剂对铯(Cs)污染土壤的淋洗效果及蒙脱石对其淋洗液的回收效果.结果表明:硫酸铵对土壤中Cs的淋洗效果最佳,当淋洗时间为120min、液固比为20:1时、老化140 d 土壤中Cs的去除率最大为40.0％;在未添加硫酸铵时,蒙...     

基于碳数分段法的石油烃污染土壤异位热脱附工艺的优化

针对石油烃污染土壤成分复杂、污染严重、修复难度高的问题,采用适用性广、效率高且去除彻底的异位热脱附技术修复石油烃污染土壤。利用碳数分段法及室内模拟实验,探究在热脱附过程中的土壤粒径、含水率和有机质对石油烃及各组分热解吸效率的影响;另外,还采用响应面法对各影响因素进行了优化,以获得异位热脱附修复石油烃污染土壤的最优工艺参数。结果表明,当污染土壤粒径高于1 mm时,石油烃脱附效率均可达90%以上,且粒径越大土壤颗粒中石油烃去除率越高。其中,润滑油段(ORO, C28~C40)组分的脱附效率随粒径变化最为明显。当土壤含水率为15%、脱附时间为50 min时,石油烃脱附效率最大为52.63%。另外,土壤中有机质含量越低,越利于石油烃的脱除,且高温(400~500 ℃)条件下可基本消除土壤中高含量有机质(3.82%)对石油烃脱除的阻碍作用。响应面优化实验得到的最佳工艺参数条件为,粒径2 mm、有机质含量1.44%、含水率为17.68%,在此条件下的石油烃脱附去除效率可达65.32%。该研究结果可为热脱附技术在石油烃污染场地的实际应用提供参考。