Poly(Ethylene Glycol) as a Compatibilizer for Poly(Lactic Acid)/Thermoplastic Starch Blends

A new route to prepare poly(lactic acid) (PLA)/thermoplastic starch (TPS) blends is described in this work using poly(ethylene glycol) (PEG), a non-toxic polymer, as a compatibilizer. The influence of PEG on the morphology and properties of PLA/TPS blends was studied. The blends were processed using a twin-screw micro-compounder and a micro-injector. The morphologies were analyzed by scanning and transmission electron microscopies and the material properties were evaluated by dynamic-mechanical, differential scanning calorimetry, thermogravimetric analysis and mechanical tests. PLA/TPS blends presented large TPS phase size distribution and low adhesion between phases which was responsible for the lower elastic modulus of this blend when compared to pure PLA. The addition of PEG resulted in the increase of PLA crystallization, due to its plasticizing effect, and improvement of the interfacial interaction between TPS and PLA matrix. Results show that incorporation of PEG increased the impact strength of the ternary blend and that the elastic modulus remained similar to the PLA/TPS blend.     

Investigating the potential of functionalized MCM-41 on adsorption of Remazol Red dye

The modification of MCM-41 was performed with 3-aminopropropyltrimethoxysilane. The structural order and textural properties of the synthesized materials were studied by X-ray diffraction, Fourier transform infrared spectroscopy, thermogravimetry/differential thermogravimetry, nitrogen adsorption, and desorption analysis. The adsorption capacity of NH₂-MCM-41 was studied with Remazol Red dye. The following parameters were studied in the adsorption process: pH, temperature, adsorbent dosage, and initial concentration. The desorption process was studied in different concentrations of NaOH solutions. The Freundlich isotherm model was found to be fit with the equilibrium isotherm data. Kinetics of adsorption follows the modified Avrami rate equation. The maximum adsorption capacity was estimated to be 45.9 mg?g^?1, with removal of the dye of 99.1 %. The NH₂-MCM-41 material exhibited high desorption capacity with 98.1 %.     

Biomonitoring the genotoxic effects of pollutants on <Emphasis Type="Italic">Tradescantia pallida</Emphasis> (Rose) D.R. Hunt in Dourados,Brazil

Purpose  

This study aimed to associate the intensity of vehicular traffic in the city of Dourados (Mato Grosso do Sul State, Brazil) with mutagenic effects and alterations in leaf physiology as measured by the quantity of micronuclei and the leaf surface parameters of Tradescantia pallida.     

Count, identification and antimicrobial susceptibility of bacteria recovered from dental solid waste in Brazil

In Brazil, few studies on microbial content of dental solid waste and its antibiotic susceptibility are available. An effort has been made through this study to evaluate the hazardous status of dental solid waste, keeping in mind its possible role in cross-infection chain. Six samples of solid waste were collected at different times and seasons from three dental health services. The microbial content was evaluated in different culture media and atmospheric conditions, and the isolates were submitted to antibiotic susceptibility testing. A total of 766 bacterial strains were isolated and identified during the study period. Gram-positive cocci were the most frequent morphotype isolated (48.0%), followed by Gram-negative rods (46.2%), Gram-positive rods (5.0%), Gram-negative-cocci (0.4%), and Gram-positive coccobacillus (0.1%). Only two anaerobic bacteria were isolated (0.3%). The most frequently isolated species was Staphylococcus epidermidis (29.9%), followed by Stenotrophomonas maltophilia (8.2%), and Enterococcus faecalis (6.7%). High resistance rate to ampicillin was observed among Gram-negative rods (59.4%) and Gram-positive cocci (44.4%). For Gram-negative rods, high resistance was also noted to aztreonam (47.7%), cefotaxime (47.4%), ceftriaxone and cefazolin (43.7%), and ticarcillin-clavulanic acid (38.2%). Against Gram-positive cocci penicillin exhibit a higher resistance rate (45.0%), followed by ampicillin, erythromycin (27.2%), and tetracycline (22.0%). The present study demonstrated that several pathogenic bacteria are present in dental solid waste and can survive after 48 h from the waste generation time and harbor resistance profiles against several clinical recommended antibiotics.     

Natural concentrations and reference values of heavy metals in sedimentary soils in the Brazilian Amazon

The soils of the Brazilian Amazon exhibit large geochemical diversity reflecting the different soil formation processes in an area covering 49% of the Brazilian territory. Soil contamination by heavy metals is one of the threats to the sustainability of this Biome but establishing quality reference values (QRVs) for the region is a challenging owing to the immense territorial area of the Amazon. This study aimed to determine the natural background of heavy metals in soils from the southwestern Brazilian Amazon in order to propose QRVs for Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Sb, and Zn for alluvial sedimentary soils. One hundred and twenty-eight soil samples were collected at a depth of 0.0–0.2 m in sites with minimal anthropogenic interference. Soil sample digestion was based on the EPA 3051A method and metal concentrations were determined by ICP-OES. QRVs calculated for the southwestern Brazilian Amazon are among the lowest recorded in Brazil (mg kg^?1): Ba (16.5), Cd (0.1), Cr (6.9), Cu (2.8), Fe (15.4), Mn (13.4), Ni (1.7), Pb (4.4), Sb (0.9), and Zn (5.7). The low metal concentration is likely a result of the sedimentary origin of the soils. The results of this study can serve as a basis for defining public policies to investigate the environmental impacts resulting from changes in land use in areas of the Brazilian Amazon.     

Comparison of USEPA digestion methods to heavy metals in soil samples

The use of appropriate analytical methods is of paramount importance for risk assessment and monitoring of potentially toxic metals in soils. In this sense, the objective of this study was to compare the effectiveness of two sample digestion methods, recommended by the Brazilian legislation for the management of contaminated areas (CONAMA 2009), aiming at the determination of environmentally available metal concentrations (USEPA 3050B, USEPA 3051A), as well as a total digestion method (USEPA 3052). Samples from 10 classes of soils were analyzed for Cu, Zn, Cd, Pb, Ni, and Hg. The results showed that the USEPA method 3051A is more efficient than the USEPA method 3050B in the extraction of levels considered environmentally available of Zn, Cu, Cd, Pb, and Ni. Besides providing a higher recovery of these elements, the method requires shorter digestion time, lower consumption of acids, and reduced risk of contamination. The USEPA method 3051A showed greater efficiency in Hg extraction in soils with higher clay content. Therefore, it is suitable for situations where a wide range of soils with different mineralogical characteristics are analyzed or in order to decrease the losses due to volatilization of the element in open systems.     

Evaluation of genotoxic effects of benzene and its derivatives in workers of gas stations

The search for reliable biomarkers of human exposure to benzene and its derivatives is still subject of research. Many of the proposed biomarkers have limitations ranging from the low sensitivity to the wide variability of results. Thus, the aim of our study was to assess the frequencies of chromosomal abnormalities (CA) and sister chromatid exchanges (SCE) in workers of gas stations, with (cases, n?=?19) and without (local controls, n?=?6) risk of exposure to benzene and its derivatives, comparing them with the results from the general population (external controls, n?=?38). The blood dosages of benzene, toluene, and xylenes were measured in all participants. Blood solvent levels were compared with the findings obtained in cytogenetic evaluation and a research protocol which included data of the workplace, lifestyle, and health of the individuals. We did not detect the presence of benzene and its derivatives and did not find chromosomal damage that may be associated with the gas station activity in cases. Moreover, although we found an association of increased SCE and the working time in the local controls, the values found for SCE are within normal limits. Thus, our evaluation of SCE and CA reflected the levels of benzene and its derivatives observed in the blood. We believe, therefore, that SCE and CA may actually constitute possible tests for the evaluation of these exposures. However, we believe that further studies, including individuals at risk, are important to confirm this assertion.     

Trends in nutrient and sediment retention in Great Plains reservoirs (USA)

Reservoirs are artificial ecosystems with physical, chemical, and biological transitional characteristics between rivers and lakes. Greater water retention time in reservoirs provides conditions for cycling materials inputs from upstream waters through sedimentation, biological assimilation and other biogeochemical processes. We investigated the effects of reservoirs on the water quantity and quality in the Great Plains (Kansas, USA), an area where little is known about these dominant hydrologic features. We analyzed a 30-year time-series of discharge, total phosphorus (TP), nitrate (NO₃ ^?), and total suspended solids (TSS) from six reservoirs and estimated overall removal efficiencies from upstream to downstream, testing correlations among retention, discharge, and time. In general, mean removal of TP (42–74 %), TSS (0–93 %), and NO₃ ^? (11–56 %) from upstream to downstream did not change over 30 years. TP retention was associated with TSS removal, suggesting that nutrient substantial portion of P was adsorbed to solids. Our results indicated that reservoirs had the effect of lowering variance in the water quality parameters and that these reservoirs are not getting more or less nutrient-rich over time. We found no evidence of temporal changes in the yearly mean upstream and downstream discharges. The ratio upstream/downstream discharge was analyzed because it allowed us to assess how much contribution of additional unsampled tributaries may have biased our ability to calculate retention. Nutrient and sediment removal was less affected by hydraulic residence time than expected. Our study demonstrates that reservoirs can play a role in the removal and processing of nutrient and sediments, which has repercussions when valuing their ecological services and designing watershed management plans.     

Assessment of organic and inorganic contaminants in sediments of an urban tropical eutrophic reservoir

Although the Ibirité reservoir (an urban tropical eutrophic reservoir) has been the recipient of the discharge of a large volume of raw urban sewage, the key cause of ecosystem degradation has been historically solely attributed to the discharge of effluents from an oil refinery. This fact motivated an investigation to unravel the compositions of contaminants in the sediments to evaluate their distributions, possible sources, and potential impacts on sediment–water quality. The concentrations of polycyclic aromatic and aliphatic hydrocarbons and of metals and metalloids were, in general, significantly lower than some selected polluted sites used for comparison. Calculated distribution indexes showed that the hydrocarbon sources were petrogenic, pyrogenic, and biogenic. Only a few PAHs exceeded the threshold effects level (TEL) guideline. Industrial activities are the presumed sources of metals and metalloids except for copper, which is from copper sulfate used as algaecide in the reservoir. The bioavailable concentrations of some metal and metalloid exceeded the TEL–PEL guidelines. The acid volatile sulfide concentration was greater than that of the simultaneously extracted metals in the clayey–silty reservoir sediments, whereas the opposite result was observed for the sandy sediments of the tributaries. The sediment interstitial water toxic units were >1 for metals, thus indicating that metals are potentially toxic to the benthos. Considering the data set generated in this study, it can be concluded that the degradation of Ibirité reservoir and its tributaries cannot be solely attributed to the input of hydrocarbons, but predominantly to the discharge of raw urban sewage and effluents from other industrial sources.