Determination of selected microbial volatile organic compounds by diffusive sampling and dual-column capillary GC-FID--a new feasible approach for the detection of an exposure to indoor mould fungi?

A new, analytically valid procedure is described to assess the exposure of human beings to the so-called microbial volatile organic compounds (MVOCs) in air. The method can be used routinely for large sample numbers and is especially valuable as a basis for further research on the correlation between single MVOCs and indoor mould growth. The procedure is based on the fact that fungi produce a variety of volatile organic compounds, such as 3-methylbutan-1-ol, 3-methylbutan-2-ol, fenchone, heptan-2-one, hexan-2-one, octan-3-one, octan-3-ol, pentan-2-ol, alpha-terpineol, and thujopsene, which they emit into the indoor environment. Using diffusive samplers, these MVOCs are adsorbed onto charcoal during a sampling interval of four weeks. The described method is thus superior to existing methods which use short-term active sampling. After desorption with carbon disulfide, the MVOCs were determined by dual-column gas chromatography with flame ionization detection using the large-volume injection technique for sample introduction. The detection limits ranged between 0.15 and 0.53 microgram m-3, within-series precision was found to range between 6.5 and 19.0%, and recovery was between 77 and 118%. The procedure has been successfully applied in the context of a large field study to measure the indoor MVOC exposure in children's rooms of 132 dwellings. The objective of the study was to examine the relation between indoor mould growth, the indoor MVOC exposure and the prevalence of adverse health effects. Information about mould formation has been obtained by a questionnaire and by the determination of colony forming units of mould fungi in mattress dust. With the exception of 3-methylbutan-2-ol, fenchone, nonan-2-one, octan-2-one, and thujopsene, indoor air concentrations of all MVOCs under investigation were significantly higher inside damp and mouldy dwellings. From the primary MVOCs under investigation, 3-methylbutan-1-ol, hexan-2-one, heptan-2-one, and octan-3-ol were found to be most reliable indicators for mould formation. A correlation was also found between selected MVOCs and the occurrence of mould species in mattress dust. Aspergillus sp. correlated with heptan-2-one, hexan-2-one, octan-3-ol, octan-3-one, and alpha-terpineol, while the occurrence of Eurotium sp. was correlated with higher indoor air concentrations of 3-methylbutan-1-ol, 3-methylbutan-2-ol, heptan-2-one, hexan-2-one, octan-3-ol, and thujopsene. Children living in dwellings with elevated MVOC levels had a higher prevalence of asthma, hay fever, wheezing, and irritations of the eyes. These positive associations persisted after controlling for confounding factors such as age, sex, body-mass index, number of siblings, social status, passive smoking, type of heating, and ventilation habits. However, they were not statistically significant. This lack of significance may be a result of the small number of investigated samples.     

Devolving power from the state: local initiatives for nature protection and recreation in Sweden

ABSTRACT

Quests for devolving more power to local actors for nature protection stem from both international and national policies. Also, there is a growing recognition of the need for local governments to promote green infrastructure for citizens to recreate and learn about their environment. Starting in 2004, the Swedish government has allocated special funding towards these goals through the Local Nature Conservation Programme (LONA). Virtually all Swedish municipalities have received such funding in pursuit of facilitating wide access to nature and promoting recreational activities, including the protection of nature areas, creating pathways, information devices, and promoting these areas among new societal groups to enjoy. This study presents the results of ten years of experience with LONA. A survey with respondents from 191 municipalities and 20 county administrations, together with 20 key informant interviews, show that the programme has been a success in several respects. Not only have most municipalities created a wealth of new ways to engage local organisations and citizens in nature conservation and recreation, but they have also broadened the ways they think about how nature is important to their constituencies. Due to innovative ways to count voluntary work as local matching of funding, smaller and less resourceful municipalities have also become engaged. Still, the local needs for further initiatives are deemed considerable. State support coupled with knowledge sharing is important to show policy priority to such bottom-up initiatives.     

Silvicultural management in maintaining biodiversity and resistance of forests in Europe-boreal zone: case Finland

The majority of untouched natural boreal forests have been regenerated through large catastrophes, occurring by intervals between 50 and 100 years. Storm and fire will open the landscape, result in a huge amount of dead or dying trees and let the pioneer tree species germinate. These processes are the guideline for Finnish forest management today.The main focus by maintaining the biodiversity in Finnish boreal forest zone is directed to managed forests. Nature-orientated silviculture on stand level is practised. The site type classification, a reflection of the modern concept of biodiversity and developed by Cajander early in 1900s, on the basis of natural vegetation composition of the site, has the central role by choosing tree species, regeneration methods and thinning procedure, and reflects also on the site productivity. The small size of stands, the abundance of natural seedlings in planted stands and the popularity of mixed stands have a positive impact on biodiversity of forests. The protection of small-sized valuable habitats in commercially managed stands, the leaving of retention trees standing and lying in the forest in all phases of the rotation, are activities made for biodiversity. Many insects and fungi are adapted to catastrophes and so they can survive in single stems left on regeneration areas. Maintaining the biodiversity in multifunctional forests is also supported by the new forest legislation and by the criteria of Finnish Forest Certification System.     

Toxicity of copper in sewage sludge

Sewage sludge is a source of organic matter and nutrients, but a major obstacle for its recycling is that the municipal wastewater sludge has low but significant levels of contaminants. This investigation, on the acute toxicity of copper in sewage sludge, was conducted with three organisms, Daphnia magna, Lemna minor and Raphanus sativus (seeds). The toxicity of the leakage water from sewage sludge spiked with CuSO(4) was studied for 64 days. The toxicity increased during the first 8-16 days and then started to decrease. The first increase in toxicity was due to ammonia, but after 32 days, a dose-related effect of copper was found. After 64 days, L. minor had an EC50 of 3800 mg Cu/kg dw for 7 days growth inhibition, a LOEC of 3200 mg Cu/kg dw and a NOEC of 1600 mg Cu/kg dw. D. magna had an EC50 of 18100 mg Cu/kg dw (24-h immobility) and a NOEC of 12800 mg Cu/kg dw. Root elongation of R. sativus was reduced at 25600 mg Cu/kg dw. Both for Daphnia and Lemna, the pH of the leakage water had an effect of the toxicity. This means that chemical speciation and bioavailability is very important for the hazard assessment of copper in sludge and soil.     

The Use of a Simple Air Quality Index in the Helsinki Area, Finland

2 (1 and 24 h), SO₂ (1 and 24 h), O₃ (1 h) and PM₁₀ (24 h). The AQI is linked to the new air quality guidelines in Finland. The AQI is based on acute health effects, but long-term effects on nature and materials are also taken into consideration. Subindices are calculated hourly for all pollutants and for a given hour the highest subindex becomes the AQI. AQI values are currently calculated for the center of Helsinki and for typical suburban areas.     

Biological monitoring of aromatic diisocyanates in workers exposed to thermal degradation products of polyurethanes

Exposure to diisocyanates was assessed by biological monitoring among workers exposed to the thermal degradation products of polyurethanes (PURs) in five PUR-processing environments. The processes included grinding and welding in car repair shops, milling and turning of PUR-coated metal cylinders, injection moulding of thermoplastic PUR, welding and cutting of PUR-insulated district heating pipes during installation and joint welding, and heat-flexing of PUR floor covering. Isocyanate-derived amines in acid-hydrolysed urine samples were analysed as perfluoroacylated derivatives by gas chromatography mass spectrometry in negative chemical ionisation mode. The limits of quantification (LOQs) for the aromatic diamines 2,4- and 2,6-toluenediamine (2,4- and 2,6-TDA) and 4,4'-methylenedianiline (4,4'-MDA) were 0.25 nmol l(-1), 0.25 nmol l(-1) and 0.15 nmol l(-1), respectively. The LOQ for the aliphatic diamines hexamethylenediamine (HDA), isophoronediamine (IpDA) and 4,4'-diaminodicyclohexyl methane (4,4'-DDHM) was 5 nmol l(-1). TDA and MDA were detected in urine samples from workers in car repair shops and MDA in samples from workers welding district heating pipes. The 2,4-TDA isomer accounted for about 80% of the total TDA detected. No 2.6-TDA was found in the urine of non-exposed workers. The highest measured urinary TDA and MDA concentrations were 0.79 nmol mmol(-1) creatinine and 3.1 nmol mmol(-1) creatinine, respectively. The concentrations found among non-exposed workers were 0.08 nmol mmol(-1) creatinine for TDA and 0.05 nmol mmol(-1) creatinine for MDA (arithmetic means). Exposure to diisocyanates originating from the thermal degradation of PURs are often intermittent and of short duration. Nevertheless, exposure to aromatic diisocyanates can be identified by monitoring diisocyanate-derived amines in acid-hydrolysed urine samples.     

Air sampling of fungal spores on filters. An investigation on passive sampling and viability

In this study, glycerol was tested as a collection substrate for passive bioaerosol sampling. Filters (mixed cellulose acetate and nitrate) were soaked in glycerol and exposed for an aerosol from three different fungal species: Penicillum commune, Aspergillus versicolor and Paecilomyces variotii. The passive sampling method was compared with a closed-face polycarbonate filter sampling method. Exposure was performed in an exposure chamber. The total number of spores was determined by microscopic techniques, and the cultivable number was determined by cultivation on Malt Extract Agar dishes. The glycerol soaked filter demonstrated a good correlation with the closed-face sampler with regard to the total count. Spores stored in a pumped filter cassette were not affected by storage for up to 7 days. On the other hand, the culturability of the spores was markedly decreased after 1 day when stored on glycerol soaked filters.     

Evaluation of VOC measurments in the EXPOLIS study. Air Pollution Exposure Distributions within Adult Urban Urban Populations in Europe

Personal exposures and microenvironment concentrations of 30 target VOCs were measured for 401 participants living in five European cities as a part of the EXPOLIS (Air Pollution Exposure Distributions within Adult Urban Populations in Europe) study. Measurements in Basel used an active charcoal (Carbotech) adsorbent as opposed to the Tenax TA used in the other study centres. In addition, within each centre, personal and microenvironment VOC sampling required different sampling pumps and, because of different sampling durations, different sampling flow rates. Thus, careful testing of the sampling and analysis procedures was required to ensure accuracy and comparability of collected data. Monitor comparison tests using Tenax TA showed a mean VOC concentration ratio of 0.95 between the personal and microenvironment monitors. The LODs for the target VOCs using Tenax TA ranged from 0.7 to 5.2 microg m(-3). The LODs for the 14 target compounds quantifiable using Carbotech ranged from 0.9 to 3.2 microg m(-3). Tenax TA field blanks showed no remarkable contamination with the target VOCs, except benzaldehyde, a known artefact with this adsorbent. Thus, the diffusion barrier system used prevented contamination of Tenax TA samples by passive diffusion during non-sampling periods. Duplicate and parallel evaluations of the Tenax TA and Carbotech showed an average difference of < 17% in VOC concentrations within the sampling methods, but a systematic difference between the methods (Tenax TA: Carbotech concentration ratio = 1.18-2.36). These field evaluations and quality assurance tests showed that interpretation and comparison of the results in any VOC monitoring exercise should be done on a compound by compound basis. It is also apparent that carefully planned and realised QA and QC (QA/QC) procedures are needed in multi-centre studies, where a common sampling method and laboratory analysis technique are not used, to strengthen and simplify the interpretation of observed VOC levels between participating centres.