Phosphorus recovery from wastewater--expert survey on present use and future potential

Today, a variety of different approaches to the recovery of phosphorus from wastewater, sludge, and sludge ash exist. These approaches differ basically by the origin of the used matter (wastewater, sludge liquor, fermented or nonfermented sludge ash) and the process (precipitation, wet-chemical extraction, and thermal treatment). To rate them according to their characteristics, the latter were phrased as hypotheses and subjected to an international expert survey. The survey showed that phosphorus recovery is expected to become an established process over the next 20 years in industrialized countries for economic reasons. A decisive aspect in this regard will be the quality of the produced fertilizer. Simple technologies such as the recovery from sludge liquor seem to be preferred. If sludge is incinerated, phosphorus recycling from ash then becomes more interesting and has to be considered. Phosphorus recovery and source-separating sanitation technologies are more appropriate for industrialized countries than for developing countries. Because the growing awareness of environmental issues will prevent sludge from being used agriculturally in an increasing number of countries in the next decade, the market potential for nutrient recovery technologies will increase in the immediate future.     

The Great Recession or progressive energy policies? Explaining the decline in US greenhouse gas emissions forecasts

This paper evaluates the causes of the 23% decline in 2030 US greenhouse gas emissions forecasts between 2007 and 2011. Dynamic regression modeling predicts that the Great Recession contributed to about 67% of the 2008–2009 emissions decline, but then fell to about an 18% share for the 2030 emissions forecast. An analysis of electricity generation forecasts show that switching from coal to gas contributed only 6% to the total 2030 decline. In contrast, regulatory impact assessments and policy analysis showed that state and federal policies were responsible for 46% of the 2030 decline in emissions.     

Summary of POHC Audit Results Using VOST and Bag Methods During RCRA Trial Burns

Audit materials containing Principal Organic Hazardous Constituents (POHCs) have been developed by EPA for use by Federal, State, and Local agencies or their contractors to assess the accuracy of measurement methods used during RCRA trial burn tests. Audit materials are currently available for 27 gaseous organics in five-, six-, seven-, and nine-component mixtures at ppb levels (7 to 10,000 ppb) in compressed gas cylinders in a balance gas of nitrogen. The logic used in selecting 27 gaseous organic compounds as audit materials and how these audit materials are successfully used in performance audits is described. Stability studies indicate that all of the organics tested (with the exception of ethylene oxide and propylene oxide below 10 ppb levels) are stable enough to be used as reliable audit materials. As of January 1990, 215 performance audits have been conducted to assess the accuracy of Volatile Organic Sampling Train (VOST) and bag measurement methods during or prior to RCRA trial burn tests. A summary of the audits conducted for each POHC, the measurement system audited, and the frequency of audits is described. The audit results obtained with audit gases are generally within ±50% of the audit concentrations.     

Re-cycling of remediated soil - Evaluation of leaching tests as tools for characterization

In Sweden, leaching tests with deionized water (D.W.) are utilized in risk assessment of materials entering landfills, but implementation of these results to evaluate the risk of spreading of pollutants in the environment is difficult. One problem is that most leaching procedures only consider heavy metals release, whereas organic pollutants are left out. The aim of the present study was to assess the possible pollutant mitigation in four remediated soils, three with heavy metals and one with polycyclic aromatic hydrocarbons (PAH) contamination. The mitigation was evaluated by standardized batch and column leaching tests utilizing three different leaching solutions: D.W., a weak ionic solution (0.001 M CaCl₂) and an artificially made soil water (ASW). In general, batch leaching tests implied larger contaminant removal than column leaching test, possibly due to the more rough treatment of the soil particles, and guidelines would at times be exceeded by the batch leaching test but not by column leaching tests. Utilization of CaCl₂ was found to release less heavy metal than D.W., whereas the metals mobilized by ASW were removed from solution by the filtration of soil leachates. Low molecular weight PAH was most efficiently mobilized by CaCl₂, while D.W. worked better for high molecular weight PAH. Despite very low initial PAH-concentrations, tap- and groundwater criteria were exceeded by all leaching solutions.     

Re-evaluation of the yield response to phosphorus fertilization based on meta-analyses of long-term field experiments

Phosphorus (P) fertilizer recommendations in most European countries are based on plant-available soil P contents and long-term field experiments. Site-specific conditions are often neglected, resulting in excessive P fertilizer applications. P fertilization experiments including relevant site and soil parameters were evaluated in order to analyze the yield response. The database comprises about 2000 datasets from 30 field experiments from Germany and Austria. Statistical evaluations using a classification and regression tree approach, and multiple linear regression analysis indicate that besides plant-available soil P content, soil texture and soil organic matter content have a large influence on the effectiveness of P fertilization. This study methodology can be a basis for modification and specification of existing P fertilization recommendations and thus contribute to mitigate environmental impacts of P fertilization.     

Aktive Stoffe als Handlungsoption gegen die Verschleppung von Organismen durch Seeschiffe?

Background and Scope

The marine shipping lanes have become the most important path for the invasion of foreign aquatic organisms. The increasing global trade results in an increase in the number of marine vessels. Without any protective measures, with every ship carrying foreign organisms the risk of biological invasions will rise.

Results

The International Martime Organization (IMO) of the United Nations developed a convention to reduce the transfer of organisms with ballast water. After the entry-into-force of this convention the fleet of the world has to be equipped with effective ballast water management technology before 2016. This article discusses potential options for action. To comply with the limit values of the ballast water convention, the current state of the art demands the use of active substances. Any decision on the approval of active substances used for ballast water treatment and the environmental impact assessment lies with the IMO. Proposed to day are UV-radiation, active chlorine, active oxygen, the creation of biocides through electrolysis and a change in gases contained in the ballast water. The technologies and the potential risks are presented.

Conclusions

Despite the introduction of an approval procedure by IMO any reliable assessment of the real risks involved in the use of biocides is impossible, as the risk assessment approaches have still to be developed. On the regulatory level, the main focus in data requirements for the risk assessment is on a comprehensive testing of the toxic potential of the biocides proposed. Strategies for the identification and evaluation of the chemical resulting from the treatment of limnic, marine and brackish water are not fully developed. An integrating assessment of risks involved in the introduction of foreign organisms versus the toxic effects of the substances used or created during treatment is still missing.     

Simulation of herbicide degradation in different soils by use of Pedo-transfer functions (PTF) and non-linear kinetics

The degradation behaviour of bentazone in 14 different soils was examined at constant temperature and moisture conditions. Two soils were examined at different temperatures. On the basis of these data the influence of soil properties and temperature on degradation was assessed and modelled. Pedo-transfer functions (PTF) in combination with a linear and a non-linear model were found suitable to describe the bentazone degradation in the laboratory as related to soil properties. The linear PTF can be combined with a rate related to the temperature to account for both soil property and temperature influence at the same time.