Characterization and quantification of solid waste generation in the Niger Delta Region of Nigeria: a case study of Ogbe-Ijoh community in Delta State

Journal of Material Cycles and Waste Management - In this study, the composition, characteristics and generation rates of solid waste (SW) in Ogbe-Ijoh community were investigated to provide...     

Fertilizer and sanitary quality of digestate biofertilizer from the co-digestion of food waste and human excreta

This research was aimed at assessing the fertilizer quality and public health implications of using digestate biofertilizer from the anaerobic digestion of food wastes and human excreta. Twelve (12) kg of food wastes and 3 kg of human excreta were mixed with water in a 1:1 w/v to make 30-l slurry that was fed into the anaerobic digester to ferment for 60 days at mesophilic temperature (22–31 °C). Though BOD, COD, organic carbon and ash content in the feedstock were reduced after anaerobic digestion by 50.0%, 10.6%, 74.3% and 1.5% respectively, nitrogen, pH and total solids however increased by 12.1%, 42.5% and 12.4% respectively. The C/N ratios of the feedstock and compost are 135:1 and 15.8:1. The residual total coliforms of 2.10 × 10⁸ CFU/100 ml in the digestate was above tolerable limits for direct application on farmlands. Microbial analysis of the digestate biofertilizer revealed the presence of Pseudomonas, Klebsiella, Clostridium, Bacillus, Bacteroides, Penicillum, Salmollena, and Aspergillus. Klebsiella, Bacillus, Pseudomonas, Penicillum and Aspergillus can boost the efficiency of the biofertilizer through nitrogen fixation and nutrient solubility in soils but Klebsiella again and Salmollena are potential health risks to end users. Further treatment of the digestate for more efficient destruction of pathogens is advised.     

Biosorptive removal of Pb(II) and Cu(II) from wastewater using activated carbon from cassava peels

The ability of activated carbon from cassava peels to remove heavy metals like Cu(II) and Pb(II) from hospital wastewater was investigated. The study showed that a pH of 8 was the best for the sorption of both metal ions onto the biosorbent. The time-dependent experiments for the metal ions showed that the binding of the metal ions to the biomass was rapid and occurred within 20–120 min. Sorption efficiency increased with a rise in adsorbent dosage. It increased from 12 to 73 % for Pb(II) and 26 to 79 % for Cu(II) when the adsorbent dose increased from 2 to 12 g. An increase in temperature led to an increase in sorption for both metal ions. The Langmuir model showed that the biomass has a higher sorption capacity for Cu(II) than Pb(II), with q _m = 5.80 mg g^?1 for Pb(II) and 8.00 mg g^?1 for Cu(II). The Freundlich isotherm K _f was 1.4 for Pb(II) and 1.8 for Cu(II), indicating a preferential sorption of Cu(II) onto the biosorbent. Adsorption capacity was found to decrease with an increase in particle sizes. Sorption occurred by physical mechanisms and was mainly controlled by intraparticle diffusion.     

Drinking water quality at Isoko North communities of the Niger Delta Region,Nigeria

Groundwater samples from boreholes and open-hand-dug wells of six communities in the Isoko North Local Government Area of Nigeria were analyzed in respect to physicochemical factors, biological factors, and the metals Na, K, Mg, Ca, Ba, Pb, Cd, Zn, Cu, and Fe for eight consecutive months to give mean values for the wet (July to October 2010) and the dry seasons (November 2010 to February 2011) for each location. The physicochemical parameters complied with World Health Organization (WHO) guidelines, except for the pH being lower and the concentrations of Pb, Cd, and Ba, being higher than the permissible limits of WHO. Total coliform counts indicated bacterial contaminations, especially in one location. The presence of Pb in the drinking water of all communities seemed to be associated with oil exploration and processing activities.