重庆大气可吸入颗粒物中多环芳烃的分析测定

本文报告了重庆大气可吸入颗粒物(IP)中多环芳烃(PAH)的分析测定方法和结果.用GC-MS定性和定量分析了重庆IP中的PAH;研究了IP中PAH的种类和分布情况;确认重庆IP中存在甲基多环芳烃(MePAH)、约占33%;颗粒大小分布表明,约有98%PAH存在于小于3μm的颗粒中.     

物理化学法治理印染废水的研究

本文提出了两个治理印染废水的综合物化流程:(1)SE—J型絮凝剂絮凝→气浮→次氯酸钙氧化→炉渣吸附;(2)SE—型絮凝剂絮凝→气浮→活性炭吸附,并对每个处理过程进行了条件实验。实验结果表明:废水经流程(1)处理后,COD去除率达82—87%,色度去除率达88—92%,废水经流程(2)处理后,COD去除率达89—92%,色度去除率达97—98%。经两个流程处理后的出水水质分别接近或达到国家排放标准。     

A complete set of procedure for determination of multiresidue of pesticides in vegetables

A complete set of procedure for determination of multiresidue of pesticides in vegetables was presented in this paper.The complete set of procedure included three steps:bioassay,cholinesterase inhibition and GLC analysis.The samples could be identified to be contaminated with pesticides if 5% of house flies was knocked down in 50 tested house flies. Those samples contaminated with pesticides needed to be detected by AChE inhibition method.The qualitative and quantitative analyses were carried out by GLC.Recoveries ranged from 83.7% in Chinese cabbages to 105.6% in tomatoes for pyrethroids,and 84.0% in tomatoes to 102.7% in sweetbell redpeppes for organophosphorus compounds.Coefficients of variations ranged from 0.59% to organophosphorus compounds.Coefficients of variations ranged from 0.59% to 7.87% for pyrethroids. and 0.33% to 9.88% for organophosphorus compounds with vegetables. The complete set of procedure has been used successfully to analyze 7000 samples collected in Beijing. About 1% of the samp     

Environmental impact of China''''s village and township industry(1988-1992): a comparison with urban industry

１ＩｎｔｒｏｄｕｃｔｉｏｎＶｉｌａｇｅａｎｄｔｏｗｎｓｈｉｐｉｎｄｕｓｔｒｙ（ＶＴＩ）ｉｓｂｅｃｏｍｉｎｇａｖｅｒｙｉｍｐｏｒｔａｎｔｃｏｍｐｏｎｅｎｔｏｆＣｈｉｎａｓｅｃｏｎｏｍｙａｎｄｅｎｖｉｒｏｎｍｅｎｔ．Ｉｎ１９９２，ＶＴＩｐｒｏｄｕｃｅｄ...     

UV/H2O2/

以     

异型材挤压模具开裂失效原因分析

分析了异型材热挤压时造成挤压模具开裂失效的各种原因,并提出了预防和补救措施。     

温压工艺中聚合物添加剂的加入方式

采用温压技术制备铁基粉末冶金材料,研究了干混和湿混两种聚合物添加剂加入方式及压制温度对生坯和烧结体性能的影响,并对其作用机理进行了探讨.试验结果表明,干混混合粉生坯及烧结体的性能略高于湿混混合粉生坯及烧结体的性能,但前者的最佳压制温度范围略高.     

冷摆辗模具的材料选择及其热处理

模具寿命是冷摆辗的关键问题之一。选择合理的模具材料以及采用适宜的热处理工艺可以提高冷摆辗模具的强韧性,从而提高模具寿命。基于摆动辗压工艺的基本原理,分析研究了冷摆辗模具的受力情况,并对冷摆辗模具材料的选择及热处理工艺作了探讨。     

方轧件在椭圆孔型中轧制温度场的三维有限元分析

应用MARC/autoforge有限元软件对方轧件在椭圆孔型中的轧制温度场进行了热力耦合模拟.研究了模拟过程中的传热边界条件,分析了轧制前和轧制过程中轧件中温度场的分布和变化规律.模拟计算结果和实验结果的比较说明二者基本是相符的.