Designing cost efficient buffer zone programs: An application of the FyrisSKZ tool in a Swedish catchment

Riparian buffer zones are the only measure which has been used extensively in Sweden to reduce phosphorus losses from agricultural land. This paper describes how the FyrisSKZ web tool can be used to evaluate allocation scenarios using data from the Svärta River, an agricultural catchment located in central Sweden. Three scenarios are evaluated: a baseline, a uniform 6-m-wide buffer zone in each sub-catchment, and an allocation of areas of buffer zones to sub-catchments based on the average cost of reduction. The total P reduction increases by 30 % in the second scenario compared to the baseline scenario, and the average reduction per hectare increases by 90 % while total costs of the program fall by 32 %. In the third scenario, the average cost per unit of reduction (€163 kg P^?1) is the lowest of the three scenarios (58 % lower than the baseline) and has the lowest total program costs.     

欧洲地表酸化水体恢复--未来展望

到目前为止,有关欧洲地表酸化水体大范围化学恢复的文献层出不穷,而有关生物恢复的报道并不多见.建立在现今欧洲排放减少计划之上的模型研究表明,化学恢复仍将继续.而影响恢复进程的诸多不确定性因素主要包括:未来生态系统内氮的可能行为和气候变化的影响.下列4个与气候变化相关的因子可能对未来恢复进程产生影响:①海水盐分入侵事件爆发频率和强度增加;②干旱发生频率和强度上升;③有机碳交换周期加快;④硝化作用增强.目前降低水体酸化程度的国际性协作是成功的,但是未来还有大量问题需要解决,也会遇到许多困难.对未来硫、氮排放减少后以及气候变化背景下酸化地表水体的水化学和水生生物变化需要继续监测.     

Synthesis of [14C]biphenyl and of some chlorinated [14C]biphenyls containing 4-chloro-, 2,4-dichloro- and 2,3,6-trichlorophenyl nuclei from the corresponding labelled anilines

The preparation of ¹⁴C-labelled biphenyl, 2,5-dichlorobiphenyl, 2,4′,5-trichlorobiphenyl, 2,2′,4,5′-tetrachlorobiphenyl, 2′,3,4,4′,5-pentachlorobiphenyl, 2,2′,3,4,4′-pentachlorobiphenyl, 2,3,3′,4′,6-pentachlorobiphenyl and 2,2′,3,3′,6-pentachlorobiphenyl is described [¹⁴C]Aniline hydrogen sulfate used as a starting material was acetylated, chlorinated and deacetylated followed by coupling to benzene or an appropriate chlorobenzene to give the biphenyls labelled in the phenyl nuclei having chlorine atoms at the 4-, 2,4- or 2,3,6-positions, respectively. The structures of the labelled compounds were established by comparison with authentic samples among which 2′,3,4,4′,5- and 2,2′,3,4,4′-pentachlorobiphenyl were not earlier described.A simple method for the preparation of 2,3,6-trichloroacetanilide, unlabelled and labelled, was worked out. 2,6-Dichloroacetanilide in concentrated hydrochloric acid gave the $\text{meta}$ substituted product when treated with chlorine.An improved thin layer chromatographic technique utilizing plates impregnated with certain tetraalkylammonium salts was used for separation of some of the labelled compounds prepared.     

Influence of trophic status on PCB distribution in lake sediments and biota

We investigated the relationship between trophic status and polychlorinated biphenyl (PCB) distribution in 19 Swedish lakes. We analyzed PCB in water, phytoplankton, zooplankton, fish and sediment during two sampling periods, in spring and summer. The mass of sigma PCB in the lake sediments was positively related to lake trophy, i.e. more PCBs were accumulated and buried in the sediment of eutrophic lakes than in oligotrophic lakes. In the oligotrophic lakes a greater fraction of the total PCB load was dissolved in water. We conclude that this is a result of higher sedimentation rates in eutrophic lakes and relatively lower turnover of organic carbon in the water column of the shallow, eutrophic lakes. In the stratified lakes, the amount of PCB per cubic meter in the epilimnion decreased from spring to summer. We suggest that sedimentation of plankton beneath the thermocline during stratification act as a sink process of PCBs from the epilimnion.     

Sedimentation and sulfate reduction under a mussel culture

The sedimentation and dissimilatory sulfate reduction under a blue-mussel culture were quantified in order to gain information on the environmental impact of intense mussel farming. The sedimentation rate (3 g C·m^-2·d^-1) under a culture is nearly three times higher than at a nearby reference station. A build-up of sediment rich in organic material and sulfide takes place under the mussels. At 15°C the sulfate reduction rate was 30.5 mmol SO ₌ ⁴ ·m^-2·^-1 in the upper 10 cm of the mussel sediment. The increase in sedimentation under a mussel culture and the consequent effects should be considered when establishing mussel farms.     

An overview of the ERICA Integrated Approach to the assessment and management of environmental risks from ionising contaminants

The ERICA project (environmental risks from ionising contaminants: assessment and management, EC contract no. FI6R-CT-2004-508847) concluded with the publication of two main outputs: the ERICA Integrated Approach to the assessment and management of environmental risks from ionising radiation, of which also introduces the user to the second main output, the ERICA Tool, which is a software programme with supporting databases, that together with its associated help will guide users through the assessment process. More than 60 European scientists contributed to the ERICA Integrated Approach. In addition, a large number of experts, policy makers, and decision-makers in different areas have contributed views on the ERICA Integrated Approach and its associated Tool from the user's perspective, through participation in the End-Users Group set up under the ERICA project. Databases on transfer, dose conversion coefficients and radiation effects on biota have been developed specifically for the purpose of the Integrated Approach, and incorporated into, or interacting with, the Tool. Species sensitivity distributions of biological effects data have been performed and did not reveal, for chronic exposure, any statistical grounds for separation between terrestrial, marine and freshwater ecosystems in terms of species sensitivity to radiation; on the basis of such analysis a universal screening dose rate criterion of 10 microGy h(-1) incremental dose rate is suggested for exiting the assessment procedure while being confident that environmental risks are negligible. This criterion is used for the two first tiers (conservative assessment with limited data requirement and various possibilities of incorporating user-defined parameter values, including the screening dose rate criterion) of the assessment methodology. Exposure situations of concern are carried through a third tier, making use of all relevant databases and with a number of issues and options listed to support and guide decision-making. This article provides an overview to the ERICA Integrated Approach, whereas further articles of this special issue describe in-depth different vital aspects of the Integrated Approach.     

The “Tsesis” oil spill: Acute and long-term impact on the benthos

The “Tsesis” oil spill in October 1977 resulted in the release of over 1 000 tons of medium grade fuel oil in an archipelago in the brackish Baltic Sea. Considerable oil quantities reached the benthos by sedimentation. Within 16 d benthic amphipods of the genus Pontoporeia, as well as the polychaete Harmothoe sarsi Kinberg, showed reduction to less than 5% of pre-spill biomasses at the most impacted station. The clam Macoma balthica (L.) was more resistant, and showed little or no mortality, but was heavily contaminated by oil (about 2 000 μg g^-1 dry wt total hydrocarbons). The meiofauna was strongly affected, with ostracods, harpacticoids, Turbellaria and kinorhynchs showing clear reductions in abundance, while nematodes, as a group, were more resistant. In the winter following the spill gravid Pontoporeia affinis Lindström females showed a statistically significant increase in the frequency of abnormal or undifferentiated eggs. Food-chain transfer of oil to flounder [Platichthys flesus (L.)] was indicated. Not until the second summer after the spill were the first signs of recovery noted at the most heavily impacted station: Amphipods, H. sarsi and harpacticoids increased and the oil concentrations in M. balthica decreased (to about 1 000 μg g^-1). In the area where amphipods had been virtually eliminated, there was an unusually heavy recruitment of M. balthica, reaching 4 000 juveniles, of 1.5–2 mm length, per square metre, probably from settling in summer 1978. Three years after the spill Pontoporeia spp. biomass was still depressed in the most affected area, while H. sarsi showed normal biomass, and M. balthica abundance was inflated. Oil concentrations in M. balthica (about 250 μg g^-1) and flounder were only slightly elevated and the oil could no longer be confidently ascribed to “Tsesis” origin, even using GC/MS-analysis. Recovery was thus underway, but the long lifespan of M. balthica implies that the disturbed community composition may persist for many years at this station. Full recovery is likely to require more than 5 yr and may take a decade or more. An effort to evaluate the accumulated monetary loss to fishery from the accident indicates that direct costs of shoreline cleanup and vessel damage were considerably greater.     

Development and growth of eggs and larvae of Mytilus edulis exposed to a linear dodecylbenzenesulphonate,LAS

The fertilization and growth of eggs and larvae of Mytilus edulis L. were studied under the influence of an important ingredient in washing powders, linear dodecylbenzenesulphonate (LAS). Observable effects occurred in concentrations as low as 0.05 ppm. The length attained by the larvae was affected even by concentrations of 0.1 ppm. The possible ecological consequences of these effects are discussed.     

PCB in soils and estimated soil-air exchange fluxes of selected PCB congeners in the south of Sweden

PCB concentrations were studied in different soils to determine the spatial variation over a region of approximately 11 000 km(2). PCB congener pattern was used to illustrate the spatial differences, as shown by principal component analysis (PCA). The relationship to different soil parameters was studied. PCB concentrations in soil showed a large variation between sampling-areas with median concentrations ranging between 2.3 and 332 ng g(-1) (dw). Highest concentrations were found at two sites with sandy soils, one with extremely high organic carbon content. Both sites were located on the west coast of southern Sweden. Soils with similar soil textures (i.e. sandy silt moraine) did not show any significant differences in PCB concentrations. PCB congener composition was shown to differ between sites, with congener patterns almost site-specific. PCB in air and precipitation was measured and the transfer of chemicals between the soil and air compartments was estimated. Soil-air fugacity quotient calculations showed that the PCBs in the soil consistently had a higher fugacity than the PCBs in the air, with a median quotient value of 2.7. The gaseous fluxes between soil and air were estimated using standard modelling equations and a net soil-air flux estimated by subtracting bulk deposition from gaseous soil-air fluxes. It was shown that inclusion of vertical sorbed phase transport of PCBs in the soil had a large effect on the direction of the net soil-air exchange fluxes.     

Conceptual design of an integrated heating system at LKAB Malmberget with consideration of social-environmental damage costs

LKAB Malmberget is a Swedish mining site located at Malmberget, Sweden. Seven boiler centers are located in the north part of Malmberget. There are no connections in between these boiler centers, meaning that it is a decentralized heating system. The heat generated is used to heat up buildings and for mine ventilation air mainly during the cold periods. The heat is mainly provided from electric and oil boilers. However, most boilers under use are over 20 years old, and it is time to retrofit the boiler system and infrastructure. The purpose of this work is to design and optimize the heating system by introducing an integrated concept to minimize the heat production cost.An optimization model based on the mixed integer linear programming (MILP) has been developed. Several technical options have been considered in a new centralized heating system. The optimization principle is based on two kinds of perspectives: current price and external costs. With consideration of environmental and health damage from society concerns point of view, instead of environmental taxes in the current price perspective, the monetary values of externalities due to pollutants such as CO₂, NO_x, SO₂ and particulates emitted from the heating system are included. On the basis of data input and assumptions, modeling results indicate that a lower cost could be achieved when a waste heat recovery boiler is installed at the older pelletization plant to recover sensible heat from flue gas. This technical option is the best solution or at least contributes to the best solution in all optimization results. Including the externality cost is useful for making fair evaluation of the social-environmental impacts of the alternatives.