Emissions from charbroiling and grilling of chicken and beef

Emission rates for fine particle (<2.5 microm) mass (PM2.5), carbon (organic/elemental), inorganic ions (SO4(2-), NO3-, NH4+), elements (primarily metals), and speciated organic compounds are reported for charbroiling hamburger, steak, and chicken. The PM2.5 rates for charbroiling meats ranged from 4.4 to 11.6 g/kg of uncooked meat in this study. No mass-emission rates are available from grilling, but the speciated organic data are available for these samples. Emission rates varied by type of appliance, meat, meat-fat content, and cooking conditions. High-fat hamburger cooked on an underfired charbroiler emitted the highest amount of PM2.5. The emissions were almost exclusively composed of organic carbon, with small amounts of elements and inorganic ions. Water-soluble K+ and Cl-, which are used as indicators of wood smoke in source apportionment studies, were also present in meat-cooking emissions. The speciated organic compounds that were measured include polycyclic aromatic hydrocarbons (PAHs), cholesterol, and the long-chain gamma-lactones. Charbroiling emissions yielded an average of approximately 3-5 times more PAHs, approximately 20 times more cholesterol, and approximately 10 times more lactones than grilling. These data were utilized in the ambient source apportionment analysis for the 1997 Northern Front Range Air Quality Study source apportionment.     

Comparison of a novel passive sampler to standard water-column sampling for organic contaminants associated with wastewater effluents entering a New Jersey stream

Four water samples collected using standard depth and width water-column sampling methodology were compared to an innovative passive, in situ, sampler (the polar organic chemical integrative sampler or POCIS) for the detection of 96 organic wastewater-related contaminants (OWCs) in a stream that receives agricultural, municipal, and industrial wastewaters. Thirty-two OWCs were identified in POCIS extracts whereas 9-24 were identified in individual water-column samples demonstrating the utility of POCIS for identifying contaminants whose occurrence are transient or whose concentrations are below routine analytical detection limits. Overall, 10 OWCs were identified exclusively in the POCIS extracts and only six solely identified in the water-column samples, however, repetitive water samples taken using the standard method during the POCIS deployment period required multiple trips to the sampling site and an increased number of samples to store, process, and analyze. Due to the greater number of OWCs detected in the POCIS extracts as compared to individual water-column samples, the ease of performing a single deployment as compared to collecting and processing multiple water samples, the greater mass of chemical residues sequestered, and the ability to detect chemicals which dissipate quickly, the passive sampling technique offers an efficient and effective alternative for detecting OWCs in our waterways for wastewater contaminants.     

Emission rates and comparative chemical composition from selected in-use diesel and gasoline-fueled vehicles

Emission samples for toxicity testing and detailed chemical characterization were collected from a variety of gasoline- and diesel-fueled in-use vehicles operated on the Unified Driving Cycle on a chassis dynamometer. Gasoline vehicles included normal particle mass (particulate matter [PM]) emitters (tested at 72 and 30 degrees F), "black" and "white" smokers, and a new-technology vehicle (tested at 72 degrees F). Diesel vehicles included current-technology vehicles (tested at 72 and 30 degrees F) and a high PM emitter. Total PM emission rates ranged from below 3 mg/mi up to more than 700 mg/mi for the white smoker gasoline vehicle. Emission rates of organic and elemental carbon (OC/EC), elements (metals and associated analytes), ions, and a variety of particulate and semi-volatile organic compounds (polycyclic aromatic hydrocarbons [PAH], nitro-PAH, oxy-PAH, hopanes, and steranes) are reported for these vehicles. Speciated organic analysis also was conducted on the fuels and lube oils obtained from these vehicles after the emissions testing. The compositions of emissions were highly dependent on the fuel type (gasoline vs. diesel), the state of vehicle maintenance (low, average, or high emitters; white or black smokers), and ambient conditions (i.e., temperature) of the vehicles. Fuel and oil analyses from these vehicles showed that oil served as a repository for combustion byproducts (e.g., PAH), and oil-burning gasoline vehicles emitted PAH in higher concentrations than did other vehicles. These PAH emissions matched the PAH compositions observed in oil.     

Efficient use of Fe metal as an electron transfer agent in a heterogeneous Fenton system based on Fe0/Fe3O4 composites

In this work a novel heterogeneous Fenton system based on Fe(0)/Fe3O4 composites is described. The composites with several Fe(0)/Fe3O4 ratios were prepared by two different methods, i.e. mechanical alloying of Fe(0) and Fe3O4 powders and controlled reduction of Fe3O4 with H2. Reaction studies and detailed Conversion Electron M?ssbauer surface characterization of the composites Fe(0)/Fe3O4, Fe(0), Fe3O4, alpha-Fe2O3 and gamma-Fe2O3 suggested that Fe2+surf species are essential to produce an active Fenton system. Kinetic studies for the oxidation of the dye methylene blue, used as an organic model molecule, and for the peroxide decomposition suggest that the reactions proceed via HO* radicals generated from Fe2+surf species and H2O2 in a Fenton like mechanism. The increase in activity caused by the addition of Fe(0) is discussed in terms of a creation of Fe2+surf species during the preparation of the composite and by an electron transfer mechanism from Fe(0) to Fe3+surf during the Fenton reaction to regenerate the Fe2+surf active species.     

Interaction between ozone and winter stress

In some countries, ozone (O3) is primarily a summer pollutant, but in much of Europe, elevated concentrations occur outside the growing season so perennials and over-wintering annuals may be subjected to the combined stresses of pollution, plus chilling, freezing, and winter desiccation. It is recognised that some air pollutants modify the response of plants to environmental stress, but little is known of interactions involving O3. This paper is part of a programme concerned with the effects of O3 on resistance to chilling, freezing, and winter desiccation. Pea (Pisum sativum L.) was used as a convenient model to confirm that O3 affects freezing resistance. The experiment also served as a further evaluation of the use of induced chlorophyll fluorescence kinetics to detect latent O3 injury. Two cultivars, 'Feltham First' and 'Conquest', were fumigated for 7 days, 7 h day(-1). Diffusive resistance and induced fluorescence were recorded daily during the period, then the plants were hardened at 4 degrees C day/2 degrees C night before exposure to 0, -2, -4, -6 and -8 degrees C. Ozone (0.075 ppm; 150 microg O3 m(-3)) caused stomatal closure in both cultivars, but the response was more rapid in 'Conquest'. There were also rapid effects on fluorescence kinetics, and it was concluded that FR, the rate of rise of induced fluorescence, is a useful parameter for indicating latent injury and for distinguishing between cultivars of different sensitivity. Exposure to O3 increased freezing injury and led to greater electrolyte leakage. The freezing resistance of 'Feltham First' was more affected than that of 'Conquest', probably because of the slower stomatal response to the pollutant leading to greater flux of O3 to the internal tissues. It is concluded that interactions involving pollutants and winter stress have implications for crop loss assessment. Perennials and over-wintering annuals should be exposed to the full range of environmental stresses.     

Outdoor/Indoor/Personal ozone exposures of children in Nashville, Tennessee

An ozone (O3) exposure study was conducted in Nashville, TN, using passive O3 samplers to measure six weekly outdoor, indoor, and personal O3 exposure estimates for a group of 10- to 12-yr-old elementary school children. Thirty-six children from two Nashville area communities (Inglewood and Hendersonville) participated in the O3 sampling program, and 99 children provided additional time-activity information by telephone interview. By design, this study coincided with the 1994 Nashville/Middle Tennessee Ozone Study conducted by the Southern Oxidants Study, which provided enhanced continuous ambient O3 monitoring across the Nashville area. Passive sampling estimated weekly average outdoor O3 concentrations from 0.011 to 0.O30 ppm in the urban Inglewood community and from 0.015 to 0.042 ppm in suburban Hendersonville. The maximum 1- and 8-hr ambient concentrations encountered at the Hendersonville continuous monitor exceeded the levels of the 1- and 8-hr metrics for the O3 National Ambient Air Quality Standard. Weekly average personal O3 exposures ranged from 0.0013 to 0.0064 ppm (7-31% of outdoor levels). Personal O3 exposures reflected the proportional amount of time spent in indoor and outdoor environments. Air-conditioned homes displayed very low indoor O3 concentrations, and homes using open windows and fans for ventilation displayed much higher concentrations.     

Impact of redox conditions on metolachlor and metribuzin degradation in Mississippi flood plain soils

The effect of soil redox conditions on the degradation of metolachlor and metribuzin in two Mississippi soils (Forrestdale silty clay loam and Loring silt loam) were examined in the laboratory. Herbicides were added to soil in microcosms and incubated either under oxidized (aerobic) or reduced (anaerobic) conditions. Metolachlor and metribuzin degradation under aerobic condition in the Forrestdale soil proceeded at rates of 8.83 ngd(-1) and 25 ngd(-1), respectively. Anaerobic degradation rates for the two herbicides in the Forestdale soil were 8.44 ngd(-1) and 32.5 ngd(-1), respectively. Degradation rates for the Loring soil under aerobic condition were 24.8 ngd(-1) and 12.0 ngd(-1) for metolachlor and metribuzin, respectively. Metolachlor and metribuzin degradation rates under anaerobic conditions in the Loring soil were 20.9 ngd(-1) and 5.35 ngd(-1). Metribuzin degraded faster (12.0 ngd(-1)) in the Loring soil under aerobic conditions as compared to anaerobic conditions (5.35 ngd(-1)).     

Influence of a dominant consumer species reverses at increased diversity

Theory and experiments indicate that changes in consumer diversity affect benthic community structure and ecosystem functioning. Although the effects of consumer diversity have been tested in the laboratory and the field, little is known about effects of consumer diversity in the subtidal zone, one of the largest marine habitats. We investigated the grazing effects of sea urchins on algal abundance and benthic community structure in a natural subtidal habitat of the Galápagos Islands. Three species of urchins (Eucidaris, Lytechinus, and Tripneustes) were manipulated in inclusion cages following a replacement design with three levels of species richness (one, two, and three species) with all possible two-species urchin combinations. Identity was the main factor accounting for changes in the percentage of substrate grazed and benthic community structure. Two out of the three two-species assemblages grazed more than expected, suggesting a richness effect, but analyses revealed that this increased grazing was due to a sampling effect of the largest and commercially valued urchin species, Tripneustes. Benthic community structure in treatments with Eucidaris, Lytechinus, and Tripneustes alone was significantly different at the end of the experiment, suggesting that resource use differentiation occurred. Communities in Tripneustes enclosures were characterized by abundant crustose coralline algae and grazed substrate, while those without it contained abundant green foliose algae (Ulva sp.). An unexpected emergent property of the system was that the most species-rich urchin assemblage underyielded, grazing less than any other assemblage with Tripneustes, effectively reversing its dominant influence observed in the two-species treatments. While further experiments are needed to discern the mechanisms of underyielding, it may be related to changing interspecific interactions as richness increases from two to three species or to density-dependent Tripneustes grazing. This study highlights the general importance of evaluating consumer richness effects across the entire range of species richness considered, as the performance of the most species-rich consumer assemblage could not be predicted by manipulations of intermediate levels of consumer species richness.     

Do natural disturbances or the forestry practices that follow them convert forests to early-successional communities?

Stand-replacing natural disturbances in mature forests are traditionally seen as events that cause forests to revert to early stages of succession and maintain species diversity. In some cases, however, such transitions could be an artifact of salvage logging and may increase biotic homogenization. We present initial (two-year) results of a study of the effects of tornado damage and the combined effects of tornado damage and salvage logging on environmental conditions and ground cover plant communities in mixed oak-pine forests in north central Mississippi. Plots were established in salvage-logged areas, adjacent to plots established before the storm in unlogged areas, spanning a gradient of storm damage intensity. Vegetation change directly attributable to tornado damage was driven primarily by a reduction in canopy cover but was not consistent with a transition to an early stage of succession. Although we observed post-storm increases of several disturbance indicators (ruderals), we also observed significant increases in the abundance of a few species indicative of upland forests. Increases in flowering were just as likely to occur in species indicative of forests as in species indicative of open woodlands. Few species declined as a result of the tornado, resulting in a net increase in species richness. Ruderals were very abundant in salvage-logged areas, which contained significantly higher amounts of bare ground and greater variance in soil penetrability than did damaged areas that were not logged. In contrast to unlogged areas severely damaged by the tornado, most upland forest indicators were not abundant in logged areas. Several of the forest and open-woodland indicators that showed increased flowering in damaged areas were absent or sparse in logged areas. Species richness was lower in salvage-logged areas than in adjacent damaged areas but similar to that in undamaged areas. These results suggest that salvage logging prevented positive responses of several forest and open-woodland species to tornado damage. Anthropogenic disturbances such as salvage logging appear to differ fundamentally from stand-level canopy-reducing disturbances in their effects on ground cover vegetation in the forests studied here and are perhaps more appropriately viewed as contributing to biotic homogenization than as events that maintain diversity.     

Height-growth response to climatic changes differs among populations of Douglas-fir: a novel analysis of historic data

Projected climate change will affect existing forests, as substantial changes are predicted to occur during their life spans. Species that have ample intraspecific genetic differentiation, such as Douglas-fir (Pseudotsuga menziesii (Mirb.) Franco), are expected to display population-specific growth responses to climate change. Using a mixed-effects modeling approach, we describe three-year height (HT) growth response to changes in climate of interior Douglas-fir populations. We incorporate climate information at the population level, yielding a model that is specific to both species and population. We use data from provenance tests from previous studies that comprised 236 populations from Idaho, Montana, and eastern Washington, USA. The most sensitive indicator of climate was the mean temperature of the coldest month. Population maximum HT and HT growth response to changes in climate were dependent on seed source climate. All populations had optimum HT growth when transferred to climates with warmer winters; those originating in sites with the warmest winters were taller across sites and had highest HT growth at transfer distances closest to zero; those from colder climates were shortest and had optimum HT growth when transferred the farthest. Although this differential response damped the height growth differences among populations, cold-climate populations still achieved their maximum growth at lower temperatures than warm-climate populations. The results highlight the relevance of understanding climate change impacts at the population level, particularly in a species with ample genetic variation among populations.