The EXPURT model for calculating external gamma doses from deposited material in inhabited areas

EXPURT, NRPB's model for calculating external gamma doses in inhabited areas, was originally developed in the mid-1980s. Deposition on surfaces in the area, the subsequent transfer of material between different surfaces or its removal from the system, and dose rates in various locations from material on the different surfaces are modelled. The model has been updated to take account of more recent experimental data on the transfer rates between surfaces and to make it more flexible for use in assessing dose rates following an accidental release. EXPURT is a compartmental model and models the transfer of material between the surfaces using a set of first order differential equations. It enables the impact of the decontamination of surfaces on doses and dose rates to be explored. The paper describes the EXPURT model and presents some preliminary results obtained using it.     

Radon exhalation from phosphogypsum building boards: symmetry constraints, impermeable boundary conditions and numerical simulation of a test case

Comprehensive understanding of (222)Rn exhalation from phosphogypsum-bearing building material and its accumulation in indoor air is likely to rely on numerical simulation, particularly if transient effects, three-dimensional domains and convection are to be included and investigated. Yet, experimental data and analytical results are helpful (if not crucial) as far as validation is concerned. Having in mind computational code simplicity and in the light of a recent experimental and theoretical report on (222)Rn release from phosphogypsum boards for housing panels, this paper presents and discusses an alternative testing set-up and the corresponding boundary conditions, namely one side of the panel bounded by impermeable wall. Although this is a new facility to be tested, the resultant steady-state one-dimensional diffusion-dominant analytical solution is shown to match the counterpart deduced in the aforementioned previous report, despite it relaxes the constraint of symmetry about the phosphogypsum board centerline, which is inferred in that prior experimental scenario. In addition, numerical results are conducted for a diffusion-dominant two-dimensional time-varying test case concerning (222)Rn accumulation in a closed chamber having an exhaling phosphogypsum board tightly placed at one wall.     

加油站：过去的问题与将来的解决办法

６０多年来燃料贮存系统实际上一直没有改变，石油工业中地面设施的开发已经取得可观的进展，但花在地下贮油设备上的钱却一直是微乎其微，据统计，一个加油站的总开发费用中仅有５－７％用于地下贮罐和管线，这一直是一个“眼不见，心不烦”的问题，直到最近石油工业才在执法部门督促下认识到，为了环境需要做出改变。     

不同碳源条件下草菇内切型纤维素酶基因（eg1）转录表达的分析

利用Northernblot方法分析了不同碳源条件下草菇切型纤维素酶基因(eg1)的表达.结果发现,在含有纤维素的液体培养基中生长10d,eg1在草菇菌丝中有高效表达;纤维二糖、α-乳糖、β-乳糖,也能诱导eg1的表达,但和纤维素相比,eg1的表达量相对较低,并且它们的诱导效应在加入这类糖12h后迅速减弱;槐糖和龙胆二糖的诱导作用非常弱.在天然稻草为基质的固体栽培料生长时,草菇eg1的表达和草菇菌丝生长与出菇相对应,在菌丝生长期(d8)可见eg1的表达,d12时菌丝已长满,表达减弱,在出菇及菇体的分化及增大期,eg1的表达量逐渐增强,在成熟期达到最高水平;表明在草菇菇体发育中需要更多碳源及能源的补充,eg1在这方面起着非常重要的作用.图4参14     

Fluoride toxicity to aquatic organisms: a review

Published data on the toxicity of fluoride (F-) to algae, aquatic plants, invertebrates and fishes are reviewed. Aquatic organisms living in soft waters may be more adversely affected by fluoride pollution than those living in hard or seawaters because the bioavailability of fluoride ions is reduced with increasing water hardness. Fluoride can either inhibit or enhance the population growth of algae, depending upon fluoride concentration, exposure time and algal species. Aquatic plants seem to be effective in removing fluoride from contaminated water under laboratory and field conditions. In aquatic animals, fluoride tends to be accumulated in the exoskeleton of invertebrates and in the bone tissue of fishes. The toxic action of fluoride resides in the fact that fluoride ions act as enzymatic poisons, inhibiting enzyme activity and, ultimately, interrupting metabolic processes such as glycolysis and synthesis of proteins. Fluoride toxicity to aquatic invertebrates and fishes increases with increasing fluoride concentration, exposure time and water temperature, and decreases with increasing intraspecific body size and water content of calcium and chloride. Freshwater invertebrates and fishes, especially net-spinning caddisfly larvae and upstream-migrating adult salmons, appear to be more sensitive to fluoride toxicity than estuarine and marine animals. Because, in soft waters with low ionic content, a fluoride concentration as low as 0.5 mg F-/l can adversely affect invertebrates and fishes, safe levels below this fluoride/l concentration are recommended in order to protect freshwater animals from fluoride pollution.     

A multi-variate statistical model integrating passive sampler and meteorology data to predict the frequency distributions of hourly ambient ozone (O3) concentrations

A multi-variate, non-linear statistical model is described to simulate passive O3 sampler data to mimic the hourly frequency distributions of continuous measurements using climatologic O3 indicators and passive sampler measurements. The main meteorological parameters identified by the model were, air temperature, relative humidity, solar radiation and wind speed, although other parameters were also considered. Together, air temperature, relative humidity and passive sampler data by themselves could explain 62.5-67.5% (R(2)) of the corresponding variability of the continuously measured O3 data. The final correlation coefficients (r) between the predicted hourly O3 concentrations from the passive sampler data and the true, continuous measurements were 0.819-0.854, with an accuracy of 92-94% for the predictive capability. With the addition of soil moisture data, the model can lead to the first order approximation of atmospheric O3 flux and plant stomatal uptake. Additionally, if such data are coupled to multi-point plant response measurements, meaningful cause-effect relationships can be derived in the future.     

Physical versus chemical effects on bacterial and bromide transport as determined from on site sediment column pulse experiments

Twenty-eight bacterial and Br transport experiments were performed in the field to determine the effects of physical and chemical heterogeneity of the aquifer sediment. The experiments were performed using groundwater from two field locations to examine the effects of groundwater chemistry on transport. Groundwater was extracted from multilevel samplers and pumped through 7-cm-long columns of intact sediment or repacked sieved and coated or uncoated sediment from the underlying aquifer. Two bacterial strains, Comamonas sp. DA001 and Paenibacillus polymyxa FER-02, were injected along with Br into the influent end of columns to examine the effect of cell morphology and cell surface properties on bacterial transport. The effects of column sediment grain size and mineral coatings coupled with groundwater geochemistry were also investigated. Significant irreversible attachment of DA001 was observed in the Fe oxyhydroxide-coated columns, but only in the suboxic groundwater where the concentrations of dissolved organic carbon (DOC) were ca. 1 ppm. In the oxic groundwater where DOC was ca. 8 ppm, little attachment of DA001 to the Fe oxyhydroxide-coated columns was observed. This indicates that DOC can significantly reduce bacterial attachment due electrostatic interactions. The larger and more negatively charged FER-02 displayed increasing attachment with decreasing grain size regardless of DOC concentration, and modeling of FER-02 attachment revealed that the presence of Fe and Al coatings on the sediment also promoted attachment. Finally, the presence of Al coatings and Al containing minerals appeared to significantly retard the Br tracer regardless of the concentration of DOC. These findings suggest that DOC in shallow oxic groundwater aquifers can significantly enhance the transport of bacteria by reducing attachment to Fe, Mn and Al oxyhydroxides. This effect appears to be profound for weakly and strongly charged hydrophilic bacteria and may contribute to differences in observations between laboratory experiments versus field-scale investigations particularly if the groundwater pH remains subneutral and Fe oxyhydroxide phases exist. These observation validate the novel approach taken in the experiments outlined here of performing laboratory-scale experiments on site to facilitate the use of fresh groundwater and thus be more representative of in situ groundwater conditions.     

Characterization and microbial utilization of dissolved organic carbon in groundwater contaminated with chlorophenols

The aim of this study was to characterize the labile part of dissolved organic carbon (DOC) present in groundwater by identification of natural organic carbon substrates and to assess their microbial utilization during aeration of the groundwater. The studied chlorophenol (CP) contaminated groundwater contained 60-2650 micromoll(-1) of DOC of which up to 98.0% were CPs; 1.7% were low-molecular weight organic acids and 0.2% were dissolved free amino acids. Traces of following natural organic carbon substrates were identified: L-alanine, L-isoleucine, L-leucine, L-serine, L-threonine, L-tyrosine, L-valine, L-aspartic, acetic, citric, formic, lactic, malic and oxalic acid. Dissolved oxygen concentration inside the CP-plume was lower (mean 25 micromoll(-1)) than outside of the plume (mean 102 micromoll(-1)). Over a monitoring period of four years the concentrations of CPs, Fe(II) and NH4+ were higher inside than outside of the CP-plume. Oxygen availability within the CP-plume limits in situ biological oxidation of CPs, DOC, NH4+ and Fe(II). The microbial enzymatic hydrolysis rates of 4-methylumbelliferyl and 7-amino-4-methylcoumarin-linked substrates varied from 0.01 to 52 micromoll(-1)h(-1) and was slightly higher inside than outside the plume. Microbial uptake rates of 14C-acetate, 14C-glucose and 14C-leucine were on average 28, 4 and 4 pmoll(-1)h(-1) outside and 17, 25 and 8 pmoll(-1)h(-1) inside the plume, respectively. The indigenous microorganisms were shown able of hydrolysis of dissolved organic matter, uptake and utilization of natural organic carbon substrates. Therefore, the labile part of DOC serves as a pool of secondary substrates beside the CP-contaminants in the groundwater and possibly help in sustaining the growth of CP-degrading bacteria.     

The photocatalytic disinfection of urban waste waters

In this paper we present the results of the photocatalytic disinfection of urban waste water. Two microbial groups, total coliforms and Streptococcus faecalis, have been used as indexes to test disinfection efficiencies. Different experimental parameters have been checked, such as the effect of TiO2, solar or UV-lamp light and pH. Disinfection of water samples has been achieved employing both UV-lamp and solar light in agreement with data shown by other authors. The higher disinfection rates obtained employing an UV-lamp may be explained by the stronger incident light intensity. Nevertheless no consistent differences have been found between TiO2-photocatalysis and direct solar or UV-lamp light irradiation at natural sample pH (7.8). At pH 5 the presence of TiO2 increases the relative inactivation rate compared with the absence of the catalyst. After the photocatalytic bacterial inactivation, the later bacterial reappearance was checked for total coliforms at natural pH and pH 5, with and without TiO2. Two h after the photocatalytic treatment, CFU increment was almost nill. But 24 and 48 h later an important bacterial CFU increment was observed. This CFU increment is slower after irradiation with TiO2 at pH 5 in non-air-purged samples.     

Wastes of multilayer containers as substrate in composting processes

An evaluation of the influence and degradation of ground multilayer containers, such as Tetra Brik Aseptic (TBA), in the composting process of municipal solid wastes (MSW) is presented. Two composting piles were formed by mixing, in different proportions, an organic fraction of MSW and TBA material ground as flakes or stripes. Piles were periodically aerated by mechanical mixing. Evolution of the composting was followed by frequent measurements of suitable parameters such as temperature, moisture, ashes, total organic carbon (TOC), nitrogen, C/N ratio, pH, conductivity, nutrients, and heavy metals. As expected, aluminum and polyethylene films from TBA were not degraded during the processes, but the cardboard fraction of TBA showed a partial decomposition that was more intense in the material ground as flakes. After two months of curing, the composts were refined and analyzed to determine their nutrient and heavy-metals contents. Despite their poor aesthetic properties, mainly resulting from the presence of little pieces of plastic and aluminum films, the composts contained the required amounts of nutrients; furthermore, their heavy-metals content was below the limits proposed by some official European organizations.