Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.     

Nitrous Oxide in Agricultural Drainage Waters Following Field Fertilisation

Dissolved nitrous oxide (N₂O), nitrate (NO₃ ^-), and ammonium (NH₄ ⁺) concentrations in an agricultural field drain were intensively measured over the period of field nitrogen (N) fertilisation and for several weeks thereafter. Supersaturations of dissolved N₂O were observed in field drain waters throughout the study. On entry to an open drainage ditch, concentrations of dissolved N₂O rapidly decreased and a total N₂O-N emission via this pathway of 13.2 g over the period of study (45 days) was calculated. This compared with a predicted emission of the order of 300 g, based on measured losses of NO₃ ^- and NH₄ ⁺ in the field drainage water, and the default IPCC emission factor of 0.01 kg N₂O-N per kg Nentering rivers and estuaries. In contrast to widespread evidence of a clear relationship between the amount of N applied to agricultural land and subsequent direct N₂O emission from the soil surface, the relationship between the amount of N₂O in soil drainage waters and the amount of N applied was poor. We conclude that the complexity, both spatially and temporally, of the processes ultimately responsible for the amount of N₂O in agricultural drainage waters make a straightforward relationship between N₂O concentration and N application rate unlikely in all but the simplest of systems.     

On the Methods for the Delimitation of Seasons

It is well known that air pollution is one of the major factors affecting human health and the activities in a town. Among the various air pollutants an interesting one, especially for sunny climates, is the reactive O₃. O₃ varies significantly through the year; it is therefore very important to know the onset and the duration of the warm period of the year since at that time O₃ concentrations increase significantly. In this work, an attempt was made to determine the onset of warm season of the year as well as its duration in various sites located in Northeastern Mediterranean. For this purpose, a fuzzy clustering method is used. The method was applied on the isobaric thickness between 1000 and 500 hPa for the period from 1974 to 1997. The results were compared to conventional methods based on synoptic classification and were found to be in good agreement.     

Assessing the Collection of Urban Solid Wastes: A Step Towards Municipality Benchmarking

The assessment of collection systems for municipal wastes is becoming an issue of increasing importance among local authorities. This paper contributes to this task by addressing and discussing a set of parameters that are characterizing certain aspects of the efficiency and effectiveness of the waste collection process. Case-study area for testing this set is the Thessaloniki Urban Area in Northern Greece. Specifically, a set of four evaluation indicators is initially discussed and quantified for each of the 14 considered municipalities, while the multiple-criteria decision support method of Analytical Hierarchy Process is finally applied to globally rank the municipalities. As a result, a classification of all examined municipalities is derived and various conclusions are drawn on certain efficiency and effectiveness aspects of waste collection systems.     

Review of in situ remediation technologies for lead,zinc, and cadmium in soil

This article presents a review of in situ technologies for the remediation of soils contaminated with lead, zinc, and/or cadmium. The objective of this review is to assess the developmental status of the available in situ technologies and provide a general summary of typical applications and limitations of these technologies. The literature review identified seven in situ remediation technologies—solidification/stabilization, vitrification, electrokinetic remediation, soil flushing, phytoextraction, phytostabilization, and chemical stabilization. These technologies were considered for their ability to meet a specific set of remediation objectives under a range of conditions. Each of these technologies has both strengths and weaknesses for addressing particular remedial situations discussed in the article for each of the technologies. A general summary of which technologies are most applicable to common remedial scenarios is also provided. © 2004 Wiley Periodicals, Inc.     

Do children have one third less peripheral vision than adults?

The following report is a case study example of how problematic information can invade and percolate through the literature on forensic human factors and ergonomics. Initially, a highly doubtful assertion was used to bolster an argument made in a legal case of wrongful death. The assertion was supported through reference to a number of cited works. When the trail of evidence was pursued, however, it became clear that diverse citations had all branched from one, single, original and doubtful source. The fundamental issue, whether children have one third less peripheral vision than adults turns out to be much more complex than the original, simplistic spatial conception suggested. The case study illustrates the importance of ascertaining original citations and is yet another example of the frustration that often accompanies forensic activity where financial and legal concerns frequently over-ride the fundamental search for knowledge.     

Identification of ergonomic issues that affect workers in oilrigs in desert environments.

The main objective of this research was to conduct an assessment of ergonomic-related problems in oilrigs in a desert environment. A checklist, physical audit and medical records were used in the investigation. The results showed significant health, environment and work-related problems that could be attributed to ergonomic deficiencies in the work system of the oilrig. Some major ergonomic issues identified were hard physical work, back pain, discomfort, hot environment, long shift, and diverse schedule. Ninety-four percent of the employees perceived the workday as very long, 79% were dissatisfied with the work schedule, while 61% of the employees perceived the summer work environment as extremely hot. Ergonomics should be considered in the work system design so as to reduce or eliminate problems in oilrigs in hot desert environments.     

Change in vegetation cover in East Timor, 1989–1999

Forest resources play a key role and provide many basic needs to communities in developing economies. To assess the patterns of vegetation cover change, as a corollary of resource utilization, satellite imagery, ground truth data, and image processing techniques can be useful. This article is concerned with identifying change in major vegetation types in East Timor between 1989 and 1999, using Landsat Thematic Mapper data. The results highlight a significant level of deforestation and decline in foliage cover. All major vegetation cover types declined from 1989 to 1999, and there was a sizeable increase in degraded woodlands. This decline has had considerable impact on the livelihoods of rural and urban communities. Causes for these changes include: economic exploitation of abundant resources; and implications of transmigration policies implemented during Indonesian rule, resulting in increased competition for land and woodland resources. As the new nation of Timor‐Leste establishes itself, it must consider its current stock and distribution of natural capital to ensure that development efforts are geared towards sustainable outcomes. Without the knowledge of historical patterns of resource consumption, development efforts may, unwittingly, lead to continuing decline in forest resources.     

Environmental assessment of supercritical water oxidation of sewage sludge

Environmental aspects of using supercritical water oxidation (SCWO) to treat sewage sludge were studied using a life cycle assessment (LCA) methodology. The system studied is the first commercial scale SCWO plant for sewage sludge in the world, treating sludge from the municipal wastewater treatment facility in Harlingen, TX, USA. The environmental impacts were evaluated using three specific environmental attributes: global warming potential (GWP), photo-oxidant creation potential (POCP) and resource depletion; as well as two single point indicators: EPS2000 and EcoIndicator99. The LCA results show that for the described process, gas-fired preheating of the sludge is the major contributor to environmental impacts, and emissions from generating electricity for pumping and for oxygen production are also important. Overall, SCWO processing of undigested sewage sludge is an environmentally attractive technology, particularly when heat is recovered from the process. Energy-conserving measures and recovery of excess oxygen from the SCWO process should be considered for improving the sustainability potential.