An examination of the physical properties,fate, ecotoxicity and potential environmental risks for a series of propylene glycol ethers

Propylene glycol ethers (PGEs) are comprised of mono-, di- and tri-PGEs and several of their acetate esters. The nature of the range of applications that use PGEs suggests that there is a potential for both intentional and unintentional entry of the materials into the environment. Selected physical/chemical properties, fate characteristics, aquatic toxicity data and calculated environmental concentrations were used to assess potential risks from the manufacture, handling, use, and disposal of PGEs. In general, the PGEs are low to moderately volatile, have high aqueous solubilities, low octanol-water partition coefficients (Kow), and bioconcentration factor values of <10, which indicate they are unlikely to accumulate in aquatic food chains. Both abiotic and biological degradation processes reduce environmental concentrations of PGEs. In air, vapor-phase PGEs react with photo-chemically produced hydroxyl radicals and have half-lives ranging from 5.5 to 34.4 h. A variety of ready and inherent biodegradation test methods, as well as tests that simulate biodegradation in wastewater treatment plants, surface water and soil have been conducted on PGEs. Significant aerobic biodegradation was generally observed, with a range of biodegradation half-lives on the order of 5-25 d. Acute aquatic toxicity studies with PGEs resulted in LC50 values ranging from approximately >100 to >20,000 mg/l for freshwater fish, the pelagic invertebrate Daphnia magna, green algae Selenastrum capricornutum (now called Pseudokirchneriella capricornutum) and bacteria. Level 3 multi-media modeling (EQC model of Mackay) was used to simulate regional-scale concentrations of PGEs in air, soil, water, and sediment. Toxicity thresholds were then compared with regional-scale water, soil and sediment concentrations to determine hazard quotients. Based upon this analysis, concentrations of PGEs are unlikely to pose adverse risks to the environment.     

Biosynthesized silver nanoparticles regulate the iron status in the spleen of Plasmodium chabaudi–infected mice

Environmental Science and Pollution Research - Malaria is a dangerous disease affecting millions around the globe. Biosynthesized nanoparticles are used against a variety of diseases including...     

Application of a constructed wetland for industrial wastewater treatment: a pilot-scale study

The main objective of this study was to examine the efficacy and capacity of using constructed wetlands on industrial pollutant removal. Four parallel pilot-scale modified free water surface (FWS) constructed wetland systems [dimension for each system: 4-m (L)x1-m (W)x1-m (D)] were installed inside an industrial park for conducting the proposed treatability study. The averaged influent contains approximately 170 mg l(-1) chemical oxygen demand (COD), 80 mg l(-1) biochemical oxygen demand (BOD), 90 mg l(-1) suspend solid (SS), and 32 mg l(-1) NH(3)-N. In the plant-selection study, four different wetland plant species including floating plants [Pistia stratiotes L. (P. stratiotes) and Ipomoea aquatica (I. aquatica)] and emergent plants [Phragmites communis L. (P. communis) and Typha orientalis Presl. (T. orientalis)] were evaluated. Results show that only the emergent plant (P. communis) could survive and reproduce with a continuous feed of 0.4m(3)d(-1) of the raw wastewater. Thus, P. communis was used in the subsequent treatment study. Two different control parameters including hydraulic retention time (HRT) (3, 5, and 7d) and media [vesicles ceramic bioballs and small gravels, 1cm in diameter] were examined in the treatment study. Results indicate that the system with a 5-d HRT (feed rate of 0.4m(3)d(-1)) and vesicles ceramic bioballs as the media had the acceptable and optimal pollutant removal efficiency. If operated under conditions of the above parameters, the pilot-plant wetland system can achieve removal of 61% COD, 89% BOD, 81% SS, 35% TP, and 56% NH(3)-N. The treated wastewater meets the current industrial wastewater discharge standards in Taiwan.     

DDT is still a problem in developed countries: the heavy pollution of Lake Maggiore

The Zebra mussel (Dreissena polymorpha), one of the most widely used bioindicators of persistent organic pollutants, trace metals and radionuclides in several worldwide freshwater ecosystems, has been used to monitor DDT contamination trends in Lake Maggiore since 1996, caused by industrial effluents on a tributary of the River Toce, one of the major affluents of the lake. Dreissena specimens were collected at two sampling sites, one within the Baveno Bay, where the River Toce flows, and the other outside (Villa Taranto). Total DDT levels (3119.6 ng/g lipids at Baveno and 1351.2 ng/g lipids at Villa Taranto) in the soft tissues of the Zebra mussel decreased at both stations by about 30-50% in the first year after the closure of the chemical plant reaching an almost steady-state condition. The high concentrations measured in Zebra mussel specimens of Baveno Bay in 2000 (1947 ng/g lipids) and the percentage of pp'DDE in comparison with total DDT concentration, which showed a slight increase in the last years, clearly indicate that a contamination source is still present, deriving probably from the lacustrine sediments and the River Toce. Data show that the environmental risk is very high within the Baveno Bay and the recovery time should be longer than in the other parts of the lake, where DDT levels in Dreissena are presently two times higher than those measured in the other Italian subalpine lakes.     

Modelling episodic acidification of surface waters: the state of science

Field studies of chemical changes in surface waters associated with rainfall and snowmelt events have provided evidence of episodic acidification of lakes and streams in Europe and North America. Modelling these chemical changes is particularly challenging because of the variability associated with hydrological transport and chemical transformation processes in catchments. This paper provides a review of mathematical models that have been applied to the problem of episodic acidification. Several empirical approaches, including regression models, mixing models and time series models, support a strong hydrological interpretation of episodic acidification. Regional application of several models has suggested that acidic episodes (in which the acid neutralizing capacity becomes negative) are relatively common in surface waters in several regions of the US that receive acid deposition. Results from physically based models have suggested a lack of understanding of hydrological flowpaths, hydraulic residence times and biogeochemical reactions, particularly those involving aluminum. The ability to better predict episodic chemical responses of surface waters is thus dependent upon elucidation of these and other physical and chemical processes.     

Wood burning impact on PM10 in three Austrian regions

Anhydrosugars (levoglucosan, mannosan and galactosan) were investigated during one year in three Austrian regions at three types of sites (city-heavy traffic-impacted, city-residential and background) in order to assess the magnitude of the contribution of wood smoke to the particulate matter load and its organic fraction. The annually averaged concentrations of levoglucosan ranged from 0.12 to 0.48 μg m^?3. The levoglucosan concentration exhibited a strong annual cycle with higher concentrations in the cold season. The minor anhydrosugars had a similar annual trend, but their concentrations were lower by a factor of about 5 and about 25 in the cold season for mannosan and galactosan, respectively. Levoglucosan concentrations were higher at the inner-urban as compared to rural sites. The contribution of wood smoke to organic carbon and PM₁₀ levels was calculated using a constant ratio of levoglucosan and OC, respectively PM₁₀ as derived for fire wood typical for Alpine European regions [Schmidl, C., Marr, I.L., Caseiro, A.e, Kotianová, P., Berner, A., Bauer, H., Kasper-Giebl, A., Puxbaum, H., 2008a. Chemical characterisation of fine particle emissions from wood stove combustion of common woods growing in mid-European Alpine regions. Atmospheric Environment 42, 126–141]. The estimated contribution of wood smoke-OC to the OC of PM₁₀ ranged from one third to more than half in the cold season with higher contributions up to 70% in winter (December, January and February) in the smaller cities and the rural background. This indicates, that wood smoke is the predominant source of organic material at rural and small urban sites in central Europe. Consistently, wood smoke was an important contributor to PM₁₀ during the cold season, with contributions of around 10% in the Vienna larger region and around 20% at rural sites in the densely forested regions of Salzburg and Styria during the winter months. In those regions residential sites exhibited highest relative wood smoke contents in PM₁₀ during autumn (September till November), indicating the use of wood stoves for auxiliary heating in the transition of warm to cold season. Using the relationships between the different anhydrosugars the combustion of softwood was found to be dominant for the wood smoke occurrence in ambient air at the investigated sites. Potassium, a commonly used tracer for biomass burning, correlated well to levoglucosan, with a mass ratio of around 0.80 in the cold season.     

The global re-cycling of persistent organic pollutants is strongly retarded by soils

'Persistent organic pollutants' (POPs) are semi-volatile, mobile in the environment and bioaccumulate. Their toxicity and propensity for long-range atmospheric transport (LRAT) has led to international bans/restrictions on their use/release. LRAT of POPs may occur by a 'single hop' or repeated temperature-driven air-surface exchange. It has been hypothesised that this will result in global fractionation and distillation-with condensation and accumulation in polar regions. Polychlorinated biphenyls (PCBs)--industrial chemicals banned/restricted in the 1970s--provide a classic illustration of POP behaviour. A latitudinally-segmented global PCB inventory has been produced, which shows that approximately 86% of the 1.3 x 10(6) tonnes produced was used in the temperate industrial zone of the northern hemisphere. A global survey of background surface soils gives evidence for 'fractionation' of PCBs. More significantly, however, very little of the total inventory has 'made the journey' via primary emission and/or air-surface exchange and LRAT out of the heavily populated source regions, in the 70 years since PCBs were first produced. Soils generally occlude PCBs, especially soils with dynamic turnover of C/bioturbation/burial mechanisms. This limits the fraction of PCBs available for repeated air-soil exchange. The forested soils of the northern hemisphere, and other C-rich soils, appear to be playing an important role in 'protecting' the Arctic from the advective supply of POPs. Whilst investigations on POPs in remote environments are important, it is imperative that researchers also seek to better understand their release from sources, persistence in source regions, and the significant loss mechanisms/global sinks of these compounds, if they wish to predict future trends.     

Residential indoor,outdoor, and workplace concentrations of carbonyl compounds: relationships with personal exposure concentrations and correlation with sources

Personal 48-hr exposures of 15 randomly selected participants as well as microenvironment concentrations in each participant's residence and workplace were measured for 16 carbonyl compounds during summer-fall 1997 as a part of the Air Pollution Exposure Distributions within Adult Urban Populations in Europe (EXPOLIS) study in Helsinki, Finland. When formaldehyde and acetaldehyde were excluded, geometric mean ambient air concentrations outside each participant's residence were less than 1 ppb for all target compounds. Geometric mean residential indoor concentrations of carbonyls were systematically higher than geometric mean personal exposures and indoor workplace concentrations. Additionally, residential indoor/outdoor ratios indicated substantial indoor sources for most target compounds. Carbonyls in residential indoor air correlated significantly, suggesting similar mechanisms of entry into indoor environments. Overall, this study demonstrated the important role of non-traffic-related emissions in the personal exposures of participants in Helsinki and that comprehensive apportionment of population risk to air toxics should include exposure concentrations derived from product emissions and chemical formation in indoor air.     

Impact of municipal solid waste dumpsites on trace metal contamination levels in the surrounding area: a case study in West Africa,Abidjan, Cote d’Ivoire

Environmental Science and Pollution Research - The impact of uncontrolled municipal dumping sites on metal contamination in the surrounding waters, sediments, and soils are of great concern in many...