Environmental management auditing: When credentials count!

We all know that the process of driving a car is not as simple as turning a key in the ignition and moving. When you want to drive a car, you take a written test to show your knowledge of the rules of the road. You learn to operate a vehicle (remember the operating difference between a standard shift and an automatic?) and then how to operate that vehicle in moving traffic. After you have gained competence in vehicle operation, you take a “hands-on” driving test to prove to an independent third party (the State) that you know what you are doing. Then, if you do know, you are issued a license, subject to renewal and perhaps retesting at some later point in time. Your license has become your credential to operate. It implies a certain minimum level of knowledge and experience. Should environmental auditing be any different? This article considers the application of a uniform standard for environmental auditor qualification. With an emphasis on ISO 14001¹ and auditing of environmental management systems, it discusses:

• the evolution of environmental auditing;
• established environmental auditor qualification processes;
• limitations of compliance auditing; and
• characteristics of a good auditor.

     

Control of ammonia toxicity to Hyalella azteca by sodium, potassium and pH

The toxicity of ammonia to Hyalella azteca at constant pH in artificial media was controlled by sodium and potassium, and not by calcium, magnesium, or anions. Small increases in the LC50 for total ammonia (from 0.15 to 0.5 mM) occurred as sodium was increased from 0.1 to 1 mM and above, but major increases in the LC50 (to over 10 mM total ammonia) required the addition of potassium. Potassium was, however, more effective at reducing ammonia toxicity at high (1 mM) sodium than at low (0.1 mM) sodium. Ammonia toxicity was independent of pH at low sodium and potassium concentrations, when ammonia toxicity appeared to be associated primarily with aqueous ammonium ion concentrations. At high sodium and potassium concentrations, the toxicity of ammonia was reduced to the point where un-ionized ammonia concentrations also affected toxicity, and the LC50 became pH dependent. A mathematical model was produced for predicting ammonia toxicity from sodium and potassium concentrations and pH.     

The uptake of particulates by an urban woodland: site description and particulate composition

Woodlands may improve local air quality by increasing the uptake rates of gaseous, particulate and aerosol pollutants from the atmosphere and can also act as relatively permanent sinks for some pollutants. Rough Wood, Walsall was selected for a study of the material which accumulates on tree foliage because of its location in a densely populated urban area, and its proximity to a motorway with high traffic flow (the M6) and to other pollutant sources. Methods were developed for leaf washing to allow determination of the quantity of dust and the identification of the dust particles present on oak leaves. Elemental analysis of particles was also undertaken using scanning electron microscopy coupled with electron probe microanalysis. A large proportion of particles were organic in origin. Of the inorganic particles, the majority contained silicon and aluminium in varying proportions suggesting that they were soil derived. Some particles were clearly identified as the products of combustion, and sea or road salt was present on leaf surfaces. Some particles contained copper, tin and titanium which may reflect the proximity of Rough Wood to local metal workings. The number of particles counted on leaf surfaces decreased as distance from the motorway increased.     

Biomonitoring environmental contaminants near a municipal solid-waste combustor

Tetrachlorodibenzo-p-dioxin (TCDD), tetrachlorodibenzofuran (TCDF) and selected metal concentrations were measured in eggs and nestlings of anhingas (Anhinga anhinga) and white ibises (Eudocimus albus) collected from a colony next to a municipal solid-waste (MSW) combustor and ash landfill. Most of the measured residues, including TCDD, TCDF, arsenic, beryllium, cadmium and nickel, remained at pre-operational levels during the first five years of facility operation. Selenium (in anhingas) and mercury (in both anhingas and ibises) occurred at their lowest concentrations in samples collected during the fifth year of facility operation (Year-5). Alternatively, concentrations of lead in ibis nestlings were highest in Year-1 and Year-5 compared to Year-0. The MSW combustor could neither be ruled out nor confirmed as the source of this lead.     

Selectivity in the complexation of actinides by humic substances

The interactions of a range of actinide elements (Th, U, Np, Pu, Am) with humic substances from the Needle's Eye natural analogue site were studied by gel permeation chromatography. Bulk humic substances were isolated by ammonia extraction, followed by dialysis against distilled water and freeze-drying. The gel permeation results suggest that Needle's Eye humic substances can be fractionated into three incompletely resolved fractions with average molecular weights determined by analytical ultracentrifugation around 49 000 for Fraction 1, around 14 700 for Fraction 2 and around 8000 for Fraction 3. Although there are significant differences between the organic matter elution patterns in individual gel permeation experiments, presumably due to differences in column packing, these are much smaller than the differences between metal ions. The uranium that is naturally present in these humic substances is largely bound in the late-eluting fraction. Spikes of the early actinides, including Np and Pu in controlled valency states, have been added to the humic substances, and gel permeation of the spiked humic substances shows that the three humic fractions vary greatly in their effectiveness and selectivity as ligands for early actinides.     

The influence of particle surface characteristics on pollutant metal uptake by cells

The phosphatic mineral, hydroxyapatite, and two ion exchange resins have been used as artificial sediment particles. The surface properties of these materials have been studied using the Langmuir adsorption isotherm to calculate the binding capacity (B(max)) and the adsorption constant (K(L)) for zinc and cadmium ions. Mussels (Mytilus edulis) were fed on the particles and their digestive glands were subsequently removed and subjected to cell fractionation. The supernatant fraction was used to determine cytosol metal levels as a measure of the materials absorbed from the ingested particles. The level of cytosol zinc and cadmium was correlated with the K(L) values of the artificial sediments. It is suggested that phagocytosis of sediment particles plays an important part in transferring pollutants into benthic organisms and that the efficiency of this process is related to the adsorption coefficient of the particle surfaces.     

Enzymatic degradation of poly([R,S] β-hydroxybutyrate)

The synthetic analogue of a bacterially produced polyester, poly(-hydroxybutyrate) (PHB) was synthesized from racemic -butyrolactone using anin situ trimethyl aluminum-water catalyst. The polymer was fractionated into samples differing in molecular weight and isotactic diad content. The latter was closely related to degree of crystallinity. The biodegradation of these fractions were examined by monitoring mass loss over time in the presence of anAlcaligenes faecalis T1 extracellular bacterial poly(-hydroxybutyrate) depolymerase. The fraction with high isotactic diad tacticity content showed little or no degradation over a 50 hour incubation period, whereas the fraction of intermediate isotactic diad content degraded in a continuous steady fashion at a rate that was less than that for bacterial PHB. The low isotactic diad fraction underwent a rapid initial degradation, followed by no further mass loss. The presence of stereoblocks in the polymer structure of the various fractions was an influence on the degree of susceptibility towards degradation and is related to sample crystallinity.     

Reproduction of mallards following overwinter exposure to selenium

Forty pairs of mallards (Anas platyrhynchos) were fed 15 ppm selenium as selenomethionine for about 21 weeks during winter. Twenty pairs served as controls. At the end of 21 weeks, which coincided with the onset of the reproductive season, selenium treatment was ended. Four birds died while on selenium treatment. Treated females lost weight, and their egg-laying was delayed. Hatching success of some of the first eggs laid by selenium-treated females was lower than that of controls, and a few of these early eggs contained deformed embryos, but, after a period of about two weeks off the selenium-treated diet, reproductive success returned to a level comparable with that of controls. The return to normal reproductive success was the result of a corresponding decrease in selenium concentrations in eggs once selenium treatment ended.     

Short-term Pb accumulation by slugs sampled from clean and contaminated sites when fed artificial Pb-spiked diets

Slugs (Deroceras reticulatum and Arion subfuscus) were sampled from two distinct sites, an uncontaminated site at Dinas Powys and a Pb-contaminated, disusedmine site at Llantrisant. Batches of the slugs were exposed for ten days under laboratory conditions to an artificial diet consisting of a 5% (w/v) agar + 5% (w/v) sucrose matrix contaminated with different concentrations of Pb, as Pb (NO(3))(2). The food 'cubes' contained approximately 0, 10, 100, and 1000 microg Pb ml(-1). Tissue-Pb concentrations increased with increasing dietary-Pb concentration in both species. However, at the highest Pb exposure (1000 microg ml(-1)) the tissue-Pb concentrations in D. reticulatum and A. subfuscus sampled originally from the clean site were higher than those in their counterparts from the contaminated site, even though the Llantrisant slugs had significantly higher baseline Pb concentrations than the Dinas Powys slugs. It is suggested that these observations indicate metal tolerance phenotypically expressed as reduced accumulation in the populations with a history of Pb-exposure in their natural habitat. We discuss how biomonitoring may be affected by the way in which different slug populations deal with metals.     

Petroleum and hazardous chemical spills in Newark Bay, New Jersey, USA from 1982 to 1991

Newark Bay, New Jersey, is particularly vulnerable to ecological damage from petroleum and chemical spills, as a result of the enclosed nature and shallow depth of the bay, the high frequency of shipping traffic, and the numerous chemical and petroleum transfer terminals located alongs its shores. To evaluate the potential impacts to the natural resources of this coastal estuarine ecosystem, chemical and petroleum accidents reported to the US Coast Guard (USCG) between 1982 and 1991 were compiled to determine the frequency and volume of these incidents in Newark Bay and in each of its major tributaries. Records obtained from the USCG National Response Center's computerized database indicated that more than 1453 accidental incidents, resulting in the release of more than 18 million US gallons of hazardous materials and petroleum products, occurred throughout Newark Bay during this period of time. The bulk of the materials released to the aquatic environment consisted of petroleum products, specifically No. 6 Fuel Oil (103 spills, 12 829 272 US gal) and gasoline (207 spills, 48 816 US gal). The majority of the reported incidents occurred in the Arthur Kill and its tributaries, as well as in the Kill Van Kull and the Passaic River. The results of this study indicated that the accidental discharge of petroleum and hazardous chemicals represents a significant source of chemical pollution in Newark Bay. Based on the frequency of spills and the volume of materials released to the aquatic environment, it is likely that these events are having a deleterious effect on the Newark Bay ecosystem.