Integrating total oxidizable precursor assay data to evaluate fate and transport of PFASs

Fate and transport of per‐ and polyfluoroalkyl substances (PFASs) are complex and are not well understood. Among this class of emerging contaminants, perfluoroalkyl acids (PFAAs) comprising perfluoroalkyl carboxylates (PFCAs) and perfluoroalkyl sulfonates (PFSAs) are being studied more frequently than polyfluorinated compounds. PFAAs are persistent in the environment, recalcitrant to biological degradation, and, therefore, widespread. Previous studies have indicated that some PFASs bioaccumulate. The fate and transport of PFAAs can be complicated by the presence of PFAA precursors. The PFAA precursors are defined in this article as those fluorinated chemicals that can be potentially transformed abiotically or biotically into terminal PFCA or PFSA products. Due to potential biotransformation in the environment, PFAA precursors can influence the temporal and lateral distribution of PFAAs in the environment. Presently, only a very small number of PFAA precursors can be quantitatively analyzed by commercial laboratories. For instance, N‐ethyl perfluorooctanesulfonamidoacetic acid and N‐methyl perfluorooctanesulfonamidoacetic acid are the only two precursors included in the most commonly applied PFAS analytical method, U.S. Environmental Protection Agency Method 537. The current commercial laboratory methodologies primarily quantify between 14 and 31 PFASs. As an alternative, a total oxidizable precursor assay (TOPA) was developed to quantify the measurable PFSA and PFCA concentrations after aggressive oxidation converting PFAA precursors abiotically into PFCAs. The difference between PFAA concentrations before and after oxidation can be used to estimate the amount of oxidizable PFAA precursors in the sample. This is one of the first articles that utilized TOPA data to help interpret PFAS fate and transport in the environment.     

Analyzing the Effects of Groundwater Pumping on an Urban Stream‐Aquifer System

When the cone of influence of a pumping well reaches a nearby river, the resulting hydraulic gradient can induce enhanced seepage of streamflow into the aquifer. The rate of seepage is often modeled using analytical solutions that are simple to apply but may not reproduce field data due to mathematical assumptions not being met in the field. Furthermore, the appropriateness of such models has not been investigated in detail due to difficulty in measuring streamflow loss in the field. In this study, a field experiment was conducted on a reach of the South Platte River near Denver, Colorado to estimate pumping‐induced streamflow loss. A network of stream gauges, monitoring wells, and in situ measurements was used to observe streamflow rates, groundwater levels, and temperature to assess if pumping wells have a significant impact on streamflow, and to compare observed streamflow depletion against analytical solutions. Data collected suggest that pumping wells have a noticeable impact on streamflow. The analytical solutions proved accurate if streamflow was low and constant but performed poorly if streamflow was high and variable. Therefore, for this reach, the use of analytical solutions to predict streamflow may only be appropriate under low‐flow, constant‐flow conditions. Methods and results can be used to guide other streamflow depletion studies and to inform cases of pumping‐induced streamflow depletion, particularly in regard to water rights.     

Analyzing the Variability of Remote Sensing and Hydrologic Model Evapotranspiration Products in a Watershed in Michigan

The goal of this paper was to statistically explore the spatiotemporal performance of remotely sensed actual evapotranspiration (ETa) datasets and a remotely sensed ensemble in a region that lacks observed data. The remotely sensed datasets were further compared with ETa results from a physically based hydrologic model (Soil and Water Assessment Tool) to examine the differences and determine the level of agreement between the ETa datasets and the model outputs. ETa datasets were compared on temporal (i.e., monthly and seasonal basis) and spatial (i.e., landuse) scales at both watershed and subbasin levels. The results showed a lack of consistent similarities and differences among the datasets when evaluating the monthly ETa variations; however, the seasonal aggregated data presented more consistent similarities and differences during the spring and summer compared to the fall and winter. Meanwhile, spatial analysis of the datasets showed the MOD16A2 500 m ETa product was the most versatile of the tested datasets, being able to differentiate between landuses during all seasons. Furthermore, the use of an averaging ensemble was able to improve overall ETa performance in the study area. This study showed that the remotely sensed ETa products are not similar throughout the year, but the appropriate application periods for different ETa products were identified. Finally, spatial variabilities of the ETa products are more in tune with landuse and climate characteristics.     

Impacts of Variable Climate and Effluent Flows on the Transboundary Santa Cruz Aquifer

Assessing groundwater resources in the arid and semiarid borderlands of the United States and Mexico represents a challenge for land and water managers, particularly in the Transboundary Santa Cruz Aquifer (TSCA). Population growth, residential construction, and industrial activities have increased groundwater demand in the TSCA, in addition to wastewater treatment and sanitation demands. These activities, coupled with climate variability, influence the hydrology of the TSCA and emphasize the need for groundwater assessment tools for decision‐making purposes. This study assesses the impacts of changes in groundwater demand, effluent discharge, and climate uncertainties within the TSCA from downstream of the Nogales International Wastewater Treatment Plant to the northern boundary of the Santa Cruz Active Management Area. We use a conceptual water budget model to analyze the long‐term impact of the different components of potential recharge and water losses within the aquifer. Modeling results project a future that ranges from severe long‐term drying to positive wetting. This research improves the understanding of the impact of natural and anthropogenic variables on water sustainability, with an accessible methodology that can be globally applied.     

Predicting the Fate and Transport of E. coli in Two Texas River Basins Using a Spatially Referenced Regression Model1

Abstract: The two main rivers of southeast Texas: Guadalupe and San Antonio have shown high temporal increase in bacteria concentration during the last decade. The SPAtially Referenced Regression On Watershed (SPARROW) attributes model, developed by the U.S. Geological Survey (USGS), has been applied to predict the fluxes and concentrations of contaminants in unmonitored streams and to identify the sources of these contaminants. This model identifies every reach as a basic network unit to distribute the sources, delivery, and attenuation factors. The model is data intensive and implements nonlinear regression to solve the parsimonious relations for describing various watershed processes. This study explored watershed and hydrological characteristics (land uses, precipitation, human and animal population, point sources, areal hydraulic load and drainage density, etc.) as the probable sources and delivery mechanisms of waterborne pathogens and their indicator (Escherichia coli [E. coli]) in the Guadalupe and San Antonio River basins. The effect of using various statistical indices for model selection on the final model’s ability to explain the various E. coli sources and transport processes was also analyzed.     

Development of a SWAT Patch for Better Estimation of Sediment Yield in Steep Sloping Watersheds1

Abstract: The watershed scale Soil and Water Assessment Tool (SWAT) model divides watersheds into smaller subwatersheds for simulation of rainfall‐runoff and sediment loading at the field level and routing through stream networks. Typically, the SWAT model first needs to be calibrated and validated for accurate estimation through adjustment of sensitive input parameters (i.e., Curve Number values, USLE P, slope and slope‐length, and so on). However, in some instances, SWAT‐simulated results are greatly affected by the watershed delineation and Digital Elevation Models (DEM) cell size. In this study, the SWAT ArcView GIS Patch II was developed for steep sloping watersheds, and its performance was evaluated for various threshold values and DEM cell size scenarios when delineating subwatersheds using the SWAT model. The SWAT ArcView GIS Patch II was developed using the ArcView GIS Avenue program and Spatial Analyst libraries. The SWAT ArcView GIS Patch II improves upon the SWAT ArcView GIS Patch I because it reflects the topographic factor in calculating the field slope‐length of Hydrologic Response Units in the SWAT model. The simulated sediment value for 321 subwatersheds (watershed delineation threshold value of 25 ha) is greater than that for 43 subwatersheds (watershed delineation threshold value of 200 ha) by 201% without applying the SWAT ArcView GIS Patch II. However, when the SWAT ArcView GIS Patch II was applied, the difference in simulated sediment yield decreases for the same scenario (i.e., difference in simulated sediment with 321 subwatersheds and 43 subwatersheds) was 12%. The simulated sediment value for DEM cell size of 50 m is greater than that for DEM cell size of 10 m by 19.8% without the SWAT ArcView GIS Patch II. However, the difference becomes smaller (3.4% difference) between 50 and 10 m with the SWAT ArcView GIS Patch II for the DEM scenarios. As shown in this study, the SWAT ArcView GIS Patch II can reduce differences in simulated sediment values for various watershed delineation and DEM cell size scenarios. Without the SWAT ArcView GIS Patch II, variations in the SWAT‐simulated results using various watershed delineation and DEM cell size scenarios could be greater than those from input parameter calibration. Thus, the results obtained in this study show that the SWAT ArcView GIS Patch II should be used when simulating hydrology and sediment yield for steep sloping watersheds (especially if average slope of the subwatershed is >25%) for more accurate simulation of hydrology and sediment using the SWAT model. The SWAT ArcView GIS Patch II is available at http://www.EnvSys.co.kr/~swat for free download.     

Sustainable Water Resources Management in a Conflict Resolution Framework1

Abstract: A decision support system for sustainable water resources management in a water conflict resolution framework is developed to identify and evaluate a range of acceptable alternatives for the Geum River Basin in Korea and to facilitate strategies that will result in sustainable water resource management. Working with stakeholders in a “shared vision modeling” framework, sustainable management strategies are created to illustrate system tradeoffs as well as long‐term system planning. A multi‐criterion decision‐making (MCDM) approach using subjective scales is utilized to evaluate the complex water resource allocation and management tradeoffs between stakeholders and system objectives. The procedures used in this study include the development of a “shared vision model,” a simulated decision‐making support system (as a tool for sustainable water management strategies associated with water conflicts, management options, and planning criteria), and the application of MCDM techniques for evaluating alternatives provided by the model. The research results demonstrate the utility of the sustainable water resource management model in aid of MCDM techniques in facilitating flexibility during initial stages of alternative identification and evaluation in a basin suffering from severe water conflicts.     

Comparing the Adoption of Contaminated Land Remediation Technologies in the United States,United Kingdom,and China

In many locations across the world, land contamination poses a serious threat to human health and the wider environment. For instance, a report published on April 17, 2014, revealed that China now has 16.1 percent of its land contaminated by various organic and inorganic contaminants, posing a range of challenges from human health risk to food security. The innovation and adoption of suitable remediation technologies is critical for solving land contamination issues. However, little is known about the pattern of remediation technology adoption, as well as its determining factors. This study uses a questionnaire survey in the United States, United Kingdom, and China to examine the spatial variation of remediation technology adoption. It further explores the temporal trend of remediation technology adoption using secondary data from the U.S. Superfund program. The study identified significant differences in remediation technology adoption among these countries, which are attributed to the different environmental, social, economic, and regulatory contexts. It is argued that the full implications of remediation technology adoption to sustainable development should be further studied, and policy instruments should be designed accordingly to promote those remediation technologies that align the best with long‐term sustainability. Technology developers may also use these implications to adjust their research and development priorities. © 2014 Wiley Periodicals, Inc.     

Aerobic Biodegradation of Hydrocarbons in High Temperature and Saline Groundwater

A series of laboratory microcosm experiments and a field pilot test were performed to evaluate the potential for aerobic biodegradation of aromatic hydrocarbons and methyl tert‐butyl ether (MtBE; a common oxygenate additive in gasoline) in saline, high temperature (>30° C) groundwater. Aquifer, sediment, and groundwater samples from two sites, one in Canada and another in Saudi Arabia, were incubated for 106 days to evaluate the changes in select hydrocarbon and MtBE concentrations and microbial community structure. Almost complete biodegradation of the aromatic hydrocarbons was found in the Saudi Arabian microcosm samples whereas the Canadian microcosm samples showed no significant biodegradation during the laboratory testing. MtBE degradation was not observed in either set of microcosms. Denaturing gradient gel electrophoresis analyses showed that, while the Canadian microorganisms were the most diverse, they showed little response during incubation. The microbial communities for the Saudi Arabian sample contained significant numbers of microorganisms capable of hydrocarbon degradation which increased during incubation. Based on the laboratory results, pilot‐scale testing at the Saudi Arabian field site was carried out to evaluate the effectiveness of enhanced aerobic biodegradation on a high temperature, saline petroleum hydrocarbon plume. Dissolved oxygen was delivered to the subsurface using a series of oxygen diffusion emitters installed perpendicular to groundwater flow, which created a reactive zone. Results obtained from the seven‐month field trial indicated that all the target compounds decreased with removal percentages varying between 33 percent for the trimethylbenzenes to greater than 80 percent for the BTEX compounds. MtBE decreased 40 percent on average whereas naphthalene was reduced 85 percent on average. Examination of the microbial population upgradient and downgradient of the emitter reactive zone suggested that the bacteria population went from an anaerobic, sulfate‐reducing dominated population to one dominated by a heterotrophic aerobic bacteria dominant population. These studies illustrate that field aerobic biodegradation may exceed expectations derived from simple laboratory microcosm experiments. Also, high salinity and elevated groundwater temperature do not appear to inhibit in situ aerobic biorestoration. © 2014 Wiley Periodicals, Inc.     

Effect of dimethoate on the immune system of female mice

Abstract

The functional status of the immune system of female mice exposed to a single oral dose of dimethoate (16 mg / kg) was evaluated by assessing cell mediated and humoral immune responses, in addition to the effect of dimethoate on spleen and body weights after different time intervals. The data showed that dimethoate caused a time ‐ depended decrease in spleen weights in the absence of a change in body weights. The immunologic effect of dimethoate to female mice produced a dose‐dependent decrease in the number of the rosette forming cells (total and active erythrocyte rosette). The ability of splenocytes to proliferation in response to mitogens; phytohemagglutinin (PHA) for T cell and lipopolysaccharide (LPS) for B cell were significantly decreased at the different times. As compared to control, a significant decrease in serum total immunoglobulins (Ig) and IgM was found, while IgG was non‐significant deceased. Results of this study also revealed that dimethoate caused a significant decrease in the number of plaque forming cell (PFC / 10⁶ splenocytes) in a time dependent manner.