Groundwater vulnerability assessment for the Banyas Catchment of the Syrian coastal area using GIS and the RISKE method

Vulnerability assessment to delineate areas that are more susceptible to contamination from anthropogenic sources has become an important element for sensible resource management and landuse planning. This contribution aims at estimating aquifer vulnerability by applying the RISKE model in Banyas Catchment Area (BCA), Tartous Prefecture, west Syria. An additional objective is to demonstrate the combined use of the RISKE model and a geographical information system (GIS) as an effective method for groundwater pollution risk assessment. The RISKE model uses five environmental parameters (Rock of aquifer media, Infiltration, Soil media, Karst, and Epikarst) to characterize the hydro-geological setting and evaluate aquifer vulnerability. The elevated eastern and low western part of the study area was dominated by high vulnerability classes, while the middle part was characterized by moderate vulnerability classes. Based on the vulnerability analysis, it was found that 2% and 39% of BCA is under low and high vulnerability to groundwater contamination, respectively, while more than 52% and 5% of the area of BCA can be designated as an area of moderate and very high vulnerability to groundwater contamination, respectively. The GIS technique has provided an efficient environment for analyses and high capabilities of handling a large amount of spatial data.     

A comprehensive review of hydrophobic silica and composite aerogels: synthesis,properties and recent progress towards environmental remediation and biomedical applications

Environmental Science and Pollution Research - The hydrophobicity of silica and composite aerogels has enabled them to acquire applications in a variety of fields. With remarkable structural,...     

How do climatic change,cereal crops and livestock production interact with carbon emissions? Updated evidence from China

Environmental Science and Pollution Research - Carbon dioxide emission and climatic variation have a detrimental influence on the atmosphere as well as on agriculture production. The key aim of the...     

Evaluation of fresh and stored rainwater quality in fluoride and arsenic endemic area of Thar Desert,Pakistan

In the current study, the chemistry of fresh and stored rainwater of Thar Desert, Pakistan, was estimated during two consecutive monsoon periods. The present research deals with the variation in physicochemical parameters, total arsenic (As^t), inorganic arsenic species (Asⁱ, As^V, As^III), and fluoride (F^?) in stored rainwater (SRW) at different time intervals (1 week to 3 months). The pH of fresh rainwater (FRW) samples showed slightly acidic to neutral in nature (6.08–7.06) which were inconsistent with the reference pH value (5.6) of rainwater. The resulted data indicated that As^t and F^? levels in SRW were enhanced with time duration. The levels of As^t and F^? in SRW after different time intervals were found in the range of 194–683 μg/L and 10–35.4 mg/L, respectively. The values of As^t and F^? were 20–70 and 7–24 times higher than those of WHO permissible limits, 10 μg/L and 1.5 mg/L, respectively. The As^III was dominant species in SRW, which corresponds to >60 % of Asⁱ. The characteristics of the SRW revealed an unacceptable quality to consume for drinking and agricultural purposes in the studied area.     

Cost efficiency analysis and emission reduction by implementation of energy efficiency standards for electric motors

The industrial sector is the biggest electricity consumer in Malaysia. Electric motors account for more than 45% of the electricity consumption in the industrial sector in the country. Therefore, it is very important to implement energy efficiency standards for electric motors to reduce energy consumption growth in this sector. This paper attempts to calculate the cost efficiency analysis and emission reduction by implementing energy efficiency standards for electric motor in Malaysia. The energy efficiency standards are proposed based on the efficiency of electric motors from survey data. The study examines the potential energy, economical and environmental impacts of the implementation of energy efficiency standards for electric motors in three scenarios i.e. 0.5%, 1.0% and 1.5% of standards efficiency improvement. Standards also enable consumers to reduce their electricity bill and contribute to a positive environmental impact.     

Effects of oxidants on soybean growth and yield in the Pakistan Punjab.

Plants of soybean (Glycine max L.) were grown with and without the ozone protectant EDU (N-[2-(2-oxo-1-imidazolidinyl)ethyl]-n2 phenylurea) at a suburban site, a remote rural site and a rural roadside site around the city of Lahore, Pakistan. The development and yield of the plants was determined in two experiments--one immediately post-monsoon and one in the following spring (pre-monsoon). Concentrations of nitrogen dioxide and photochemical oxidants were measured at each site. The effect on yield of EDU at the suburban site (47 and 113% increase in seed weight per plant relative to the untreated plants in the post- and pre-monsoon experiments, respectively) was similar to the effects of filtration on yield on soybean in a parallel open-top chamber study at the same site (77% increase relative to plants subjected to unfiltered air for the pre-monsoon experiment). Effects of EDU on yield were greater at both rural sites than at the suburban site in both experiments, and greater in the spring experiment (182% at the remote rural site and 285% at the rural roadside site) than in the post-monsoon experiment (94% at the remote rural site and 170% at the rural roadside site); oxidant concentrations were also greater at the rural sites than at the suburban site, and greater in the spring experiment than the post-monsoon experiment. The results imply that ozone may be causing significant crop losses in rural areas around Lahore; however, the geographical extent of the problem, and the implications for peri-urban agriculture around other cities of south Asia are uncertain.     

House dust as a source of human exposure to polybrominated diphenyl ethers in Kuwait

This study reports concentrations of polybrominated diphenyl ethers (PBDEs) in dust samples collected from 17 homes in Kuwait. PBDEs were measured in all homes investigated with mean summation operatorPBDEs concentration ranging from 1 to 393 ng g(-1), with a geometric mean of 76 ng g(-1). The dominant congener in all samples was BDE 209 constituting ca. 85% of the summationPBDEs followed by BDE 99 (5%), BDE 47 (4.5%), and BDE 183 (2%). The congener mixture in dust is dominated by those in deca and penta formulations. Using the measured concentrations and estimates of dust ingestion rates for children and adults, estimated human non-dietary exposure based on mean PBDE levels were 14.8 and 1.5 ng day(-1) for children and adults, respectively. The 10-fold difference in exposure estimates between children and adults in this study supports previous reports that children are at greater risk from pollutants that accumulate indoors. The ubiquitous distribution of these chemicals as noted in this study highlights the fact that we are continuously exposed to low doses of chemicals in the indoor environment.     

Numerical parametric study of a new earth-air heat exchanger configuration designed for hot and arid climates

ABSTRACT

Thermal potential for cooling and heating can be achieved by new configuration of earth–air heat exchanger (EAHE). This paper presents a numerical investigation of thermal performance of a spiral-shaped configuration of EAHE intended for the summer cooling in hot and arid regions of Algeria. A commercial finite volume software (ANSYS FLUENT) has been used to carry out the transient three-dimensional simulations and the obtained results have been validated using the experimental and numerical data obtained from the literature. The agreement between our simulation results and those from literature is very satisfactory. A parametric analysis of the new geometry of (EAHE) has been performed to investigate the effect of pitch, depth, pipe length and of the flow velocity on the outlet air temperature and the EAHE’s mean efficiency as well as its coefficient of performance (COP). It has been shown that when the pitch space varies between 0.2 and 2 m the difference of outlet air temperature increases by 6 ^°C. When the air velocity increases from 2 to 5 m/s the mean efficiency decreases from 60 % to 33 % and the COP of the EAHE decreases from 2.84 to 0.46.