In Situ flushing of contaminated soils from a refinery: Organic compounds and metal removals

This article demonstrates the applicability of in situ flushing for the remediation of soil contaminated with petroleum hydrocarbons at a Mexican refinery. The initial average total petroleum hydrocarbon (TPH) concentration for the demonstration field test was 55,156 g/kg. After six weeks of in situ flushing with alternate periods of water and water/surfactant, an average concentration of 1,407 mg/kg was reached, achieving a total removal efficiency of 98 percent. At the end of the process, no hydrocarbons such as diesel; gasoline; benzene, toluene, ethyl benzene, and xylene (BTEX); or petroleum aromatic hydrocarbons (PAHs) were found. Iron washing achieved a removal efficiency of 70 percent, and for vanadium, the removal efficiency was 94.4 percent. The volume of soil treated was 41.6 m³ (38 m²), equivalent to 69.5 tons of soil. A rough calculation of the process costs estimated a total cost of $104.20/m³ ($114.00/m²). Our research indicates that there are a few studies demonstrating in situ flushing experiences under field conditions where both organic (TPH, diesel, gasoline, PAHs, BTEX) and metal (iron and vanadium) removals are reported. © 2004 Wiley Periodicals, Inc.     

Trace Element Contaminants in Sediments From the Noaa National Status and Trends Programme Compared to Data From Throughout the World

The National Oceanic and Atmospheric Administration's (NOAA) National Status and Trends (NS&T) Programme has analyzed samples of surface sediment collected at almost 300 coastal and estuarine sites throughout the United States since 1984. the overall distributions for concentrations of each element are approximately lognormal allowing a definition of geometric means and of “high” concentrations as those exceeding the mean plus one standard deviation of the lognormal distribution. Those mean and “high” concentrations should be useful for comparing the NS&T data set and with other reports on sediment contamination. A world-wide data set, constructed from data in the literature, was summarized in an identical manner. It was found, after excluding locally extreme values, that the NS&T and world-wide data sets yielded very similar mean and “high” concentrations for Cu, Ni, Pb and Zn. Chromium was the sole element showing higher summary statistics in the NS&T data set, a result attributed to NS&T sampling in areas of naturally (not contaminated) elevated Cr content. It remains undetermined, however, why the world-wide data set, even with exclusion of “hot spots”, yielded higher means and “highs” for Cd, Hg, As, and Ag.     

Sequential removal of heavy metals ions and organic pollutants using an algal-bacterial consortium

The residual algal-bacterial biomass from photosynthetically supported, organic pollutant biodegradation processes, in enclosed photobioreactors, was tested for its ability to accumulate Cu(II), Ni(II), Cd(II), and Zn(II). Salicylate was chosen as a model contaminant. The algal-bacterial biomass combined the high adsorption capacity of microalgae with the low cost of the residual biomass, which makes it an attractive biosorbent for environmental applications. Cu(II) was preferentially taken-up from the medium when the metals were present both separately and in combination. There was no observed competition for adsorption sites, which suggested that Cu(II), Ni(II), Cd(II), and Zn(II) bind to different sites and that active Ni(II), Cd(II) and Zn(II) binding groups were present at very low concentrations. Therefore, special focus was given to Cu(II) biosorption. Cu(II) biosorption by the algal-bacterial biomass was characterized by an initial fast cell surface adsorption followed by a slower metabolically driven uptake. pH, Cu(II), and algal-bacterial concentration significantly affected the biosorption capacity for Cu(II). Maximum Cu(II) adsorption capacities of 8.5+/-0.4 mg g-1 were achieved at an initial Cu(II) concentration of 20 mg l-1 and at pH 5 for the tested algal-bacterial biomass. These are consistent with values reported for other microbial sorbents under similar conditions. The desorption of Cu(II) from saturated biomass was feasible by elution with a 0.0125 M HCl solution. Simultaneous Cu(II) and salicylate removal in a continuous stirred tank photobioreactor was not feasible due to the high toxicity of Cu(II) towards the microbial culture. The introduction of an adsorption column, packed with the algal-bacterial biomass, prior to the photobioreactor reduced Cu(II) concentration, thereby allowing the subsequent salicylate biodegradation in the photobioreactor.     

Phylogenetic relationships within Ovulidae (Gastropoda: Cypraeoidea) based on molecular data from the 16S rRNA gene

Closely interacting groups, such as hosts and parasites, sometimes provide useful models to study evolution and adaptive processes. In Ovulidae, a widespread family of specialised browsing carnivorous molluscs that feed on polyps and tissues of Anthozoa, close association with the host has produced a plethora of adaptations affecting shell morphology, colour pattern and mantle shape. These morphological characters have been widely used in ovulid taxonomy, although putative differences are often based on trivial and inconsistent variations. In this work we used a molecular approach to generate the basal phylogeny of the family. Phylogenetic analyses of mitochondrial 16S rRNA gene sequences of 32 species from 23 genera reveal unexpected taxonomic groupings from the genus up to the family level, as well as unexpected phenomena of homoplasy in conchological features. Since molecular phylogenies also provide an evolutionary framework where character transformations are polarised, we used this basal ovulid phylogeny to explore the specificity of the association and the degree of morphological adaptation to the host.Electronic Supplementary Material Supplementary material is available in the online version of this article at http://dx.doi.org/10.1007/s00227-005-1566-0.Communicated by R. Cattaneo-Vietti, Genova     

Field Trial Assessment of Biological,Chemical, and Physical Responses of Soil to Tillage Intensity,Fertilization, and Grazing

Soil microbial populations can fluctuate in response to environmental changes and, therefore, are often used as biological indicators of soil quality. Soil chemical and physical parameters can also be used as indicators because they can vary in response to different management strategies. A long-term field trial was conducted to study the effects of different tillage systems (NT: no tillage, DH: disc harrow, and MP: moldboard plough), P fertilization (diammonium phosphate), and cattle grazing (in terms of crop residue consumption) in maize (Zea mays L.), sunflower (Heliantus annuus L.), and soybean (Glycine max L.) on soil biological, chemical, and physical parameters. The field trial was conducted for four crop years (2000/2001, 2001/2002, 2002/2003, and 2003/2004). Soil populations of Actinomycetes, Trichoderma spp., and Gliocladium spp. were 49% higher under conservation tillage systems, in soil amended with diammonium phosphate (DAP) and not previously grazed. Management practices also influenced soil chemical parameters, especially organic matter content and total N, which were 10% and 55% higher under NT than under MP. Aggregate stability was 61% higher in NT than in MP, 15% higher in P-fertilized soil, and also 9% higher in not grazed strips, bulk density being 12% lower in NT systems compared with MP. DAP application and the absence of grazing also reduced bulk density (3%). Using conservation tillage systems, fertilizing crops with DAP, and avoiding grazing contribute to soil health preservation and enhanced crop production.     

Median lethal concentration of formaldehyde and its genotoxic potential in bullfrog tadpoles (Lithobates catesbeianus)

In order to avoid that contaminated frog farms animals escaping in the environment and become potential vector of emergent diseases, studies with disinfection protocol are strictly necessary. The formaldehyde is one of the compounds tested in fungal disinfection protocols and also used in aquaculture. This study aimed to determine the median lethal concentration (LC_50–96h) of formaldehyde in bullfrog tadpoles and to evaluate the possible genotoxic effects in acute exposition. Accordingly, the animals were exposed to formaldehyde in the concentrations of 6, 9, 12, 15, and 18 mg L^?1, and after 96 h blood samples were drawn for the micronucleus (MN) test. The LC_50–96h was 10.53 mg L^?1, and the MN frequency increased in proportion to the formaldehyde concentrations, with an estimated frequency in the negative control being 1.35 MN/individual. We concluded that formaldehyde is genotoxic to tadpoles of bullfrogs in the tested concentrations, and the choice of this chemical should be contemplated before its use in animals in captivity.     

The effect of bee pollen on secretion activity, markers of proliferation and apoptosis of porcine ovarian granulosa cells in vitro

The general objective of this in vitro study was to examine the effect of bee pollen on the release of insulin-like growth factor I (IGF-I) and steroid hormone progesterone, and expression of markers of proliferation (PCNA) and apoptosis (caspase-3) in porcine ovarian granulosa cells. Concentrations of IGF-I and progesterone were determined by RIA method and expression of PCNA and caspase-3 by immunocytochemistry. Bee pollen addition at the dose of 10 ng/mL significantly (P<0.05) inhibited IGF-I release by porcine ovarian granulosa cells. This growth factor was not influenced by 100 and 1000 ng/mL doses of bee pollen. Progesterone release by cells was not influenced by bee pollen addition at the doses of 10, 100 and 1000 ng/mL as used in our study. Similarly expression of PCNA and caspase-3 was not affected by bee pollen addition. The present study shows dose-dependent regulation of IGF-I by experimental bee pollen addition in vitro. Progesterone release, expression of PCNA and caspase-3 in porcine ovarian granulosa cells was not induced by pollen. Our results contribute to new insights regarding the possible effect of bee pollen on IGF-I release, which is important for regulation of porcine ovarian functions.     

Effects of azinphos-methyl exposure on enzymatic and non-enzymatic antioxidant defenses in Biomphalaria glabrata and Lumbriculus variegatus

Azinphos-methyl is an organophosphate insecticide used for pest control on a number of food crops in many parts of the world. The oligochaete Lumbriculus variegatus and pigmented and non-pigmented specimens of the gastropod Biomphalaria glabrata are freshwater invertebrates that have been recommended for contamination studies. Recently, it has been shown that L. variegatus worms exhibit a higher cholinesterase (ChE) activity and a greater sensitivity to in vivo ChE inhibition by azinphos-methyl than pigmented B. glabrata snails. The aims of the present study were (1) to investigate if, in addition to its anticholinesterase action, azinphos-methyl has also pro-oxidant activity in L. variegatus and B. glabrata, and (2) to examine if species that are highly susceptible to the neurotoxic effects of organophosphates also suffer a greater degree of oxidative stress. Therefore, total glutathione (t-GSH) levels and activities of cholinesterase (ChE), superoxide dismutase (SOD), catalase (CAT), glutathione S-transferase (GST), and glucose 6-phosphate dehydrogenase (G6PDH) were measured in the whole body soft tissue of organisms exposed for 48 and 96 h to a level of azinphos-methyl that produces 50% of inhibition on ChE. Results showed different patterns of antioxidant responses between the gastropods and the oligochaetes, and even between the two phenotypes of gastropods: (1) in exposed L. variegatus t-GSH levels increased and CAT and SOD activities decreased with respect to control organisms, (2) in pigmented gastropods, SOD decreased while CAT transiently diminished, and (3) in non-pigmented gastropods, SOD activity showed a biphasic response. GST and G6PDH were not altered by azinphos-methyl exposure. Of note, t-GSH levels were 4-fold times higher in L. variegatus than in both phenotypes of B. glabrata. This may suggest that GSH could play a more important role in antioxidant defense in L. variegatus than in B. glabrata.     

Influence of atmospheric stability on the mass concentration and chemical composition of atmospheric particles: a case study in Rome, Italy

PM(10) concentration and chemical composition (ions and carbon compounds) at three sampling stations in Rome and in its surroundings was determined daily during a one-month field study, carried out during December 2003. PM concentration at the traffic station was considerably higher than at the urban background and semi-rural stations; elemental carbon was detected as one of the chemical components responsible for this increase. The difference in the concentration of sulphate and ammonium was negligible, as it was expected for secondary pollutants. A negative artefact in the determination of ammonium nitrate by means of heated automatic monitors was highlighted. The dilution properties of the lower atmosphere were traced by means of a natural radioactivity monitor. This parameter has been found to play an essential role in pollution buildup. A considerable increase in PM concentration was observed to coincide with periods of atmospheric stability. The main difference in PM composition between periods of high concentration and periods of "clean" air was found to be in the increase of ammonium nitrate concentration.     

Dye-sensitized photodegradation of the fungicide carbendazim and related benzimidazoles

The present work studies the visible-light-promoted photodegradation of the colorless fungicide carbendazim (methyl 2-benzimidazolecarbamate) and several 2-substituted benzimidazoles (SBZ's), in water or water-methanol solution, in the presence of air and, as a photosensitizer, the synthetic xanthene dye Rose Bengal (RB) or the natural pigment riboflavin (Rf). The results indicate that the degradation of each particular SBZ depends on its chemical structure and on the sensitizer employed. In the presence of RB, the degradation always operates via a singlet molecular oxygen (O(2)((1)Delta(g)))-mediated mechanism, through a highly efficient process, as deduced from the comparison of the rate constants for physical and chemical quenching of O(2)((1)Delta(g)). In the presence of Rf, the visible-light irradiation of any of the studied SBZ's produces a series of competitive processes that depend on the relative concentrations of Rf and SBZ. These processes include the quenching of excited singlet and triplet Rf states by the SBZ and the generation of both O(2)((1)Delta(g)) and superoxide radical anion (O(2)(-)), the latter generated by electron transfer from excited Rf species to the dissolved oxygen. The overall result is the photodegradation of the SBZ and the photoprotection of the sensitizer.