Impact of economic policy uncertainty on CO2 emissions: evidence from top ten carbon emitter countries

Environmental Science and Pollution Research - Over the last few decades, economic policy uncertainty (EPU) has surged across the globe. Furthermore, EPU affects economic activities, which may also...     

Managerial policy and economic analysis of wind-generated renewable hydrogen for light-duty vehicles: Green solution of energy crises

Environmental Science and Pollution Research - The unconventional energy sources like hydrogen energy have tremendous potential of filling the gap between economic growth and clean energy...     

Total mercury and methylmercury concentrations in native and invasive fish species in Shadegan International Wetland,Iran, and health risk assessment

Human exposure to mercury (Hg) mainly occurs through consumption of aquatics, especially fish. In aquatic systems, the bioaccumulation of Hg across trophic levels could be altered by invasive species through changing community composition. The present study is aimed at measuring total mercury (T-Hg) and methylmercury (MeHg) concentrations in non-native (redbelly tilapia (Tilapia zillii)) and native (Benni (Mesopotamichthys sharpeyi) and common carp (Cyprinus carpio)) fish species throughout Shadegan International Wetland and comparing health risk of their mercury contents to the local population. The concentrations were measured using a direct mercury analyzer (DMA 80). The average values of T-Hg and MeHg for native fishes were 19.8 and 10.49 μg/kg. These concentrations for the invasive fish were 28 and 14.62 μg/kg respectively. Despite having less length and weight than the native fish species, tilapia showed significantly higher T-Hg content, yet the lowest concentration of MeHg was observed in common carp with larger body length and weight. Concerning mercury health risk to consumers, tilapia demonstrated the highest estimated weekly intake (EWI) and percentages of tolerable weekly intake (%TWI) for both T-Hg and MeHg, while the highest hazard quotient (HQ) values were obtained for tilapia and Benni. Taken together, the mercury concentrations in the two native and non-native fishes were acceptable according to the international safety guidelines although the local people shall be warned for consumption of tilapia. Furthermore, the low calculated value of tissue residue criterion (TRC) for the wetland fishes sounds a warning.     

Elevated exposure to polycyclic aromatic hydrocarbons (PAHs) may trigger cancers in Pakistan: an environmental,occupational, and genetic perspective

Environmental Science and Pollution Research - Polycyclic aromatic hydrocarbons (PAHs) are carcinogenic compounds which are emitted through incomplete combustion of organic materials, fossil fuels,...     

The potential of cost-effective coconut husk for the removal of toxic metal ions for environmental protection

Coconut (Cocos nucifera) husk, an agricultural waste, has been thoroughly investigated for the removal of toxic Cd(II), Cr(III) and Hg(II) ions from aqueous media. The parameters like nature and composition of electrolyte, concentration of toxic ions, dosage of coconut husk, and equilibration time between the two phases were optimized for their maximum accumulation onto the solid surface. The effect of common ions on the uptake of metal ions has been monitored under optimal conditions. The variation of retention of each metal ion with temperature was used to compute the thermodynamic quantities DeltaH, DeltaS and DeltaG. The values 18.1+/-0.6 kJmol(-1), 74+/-2 Jmol(-1)K(-1), and -3.8+/-0.04 kJmol(-1) at 298 K; 10.8+/-0.8 kJmol(-1), 48.8+/-2.7 Jmol(-1)K(-1), and -4.6+/-0.3 kJmol(-1) at 298 K; and -37.4+/-2k Jmol(-1), 105+/-7 Jmol(-1)K(-1) and -2.58+/-0.5 kJmol(-1) at 298 K were obtained for Cd(II), Cr(III) and Hg(II) ions, respectively. The sorption data were analysed by applying different sorption isotherms. The sorption capacity and energy were evaluated for each metal ion. The values of the Freundlich constants 1/n and C(m) were 0.92+/-0.04 and 52.6+/-22.2 mmolg(-1); 0.85+/-0.05 and 56.0+/-0.03 mmolg(-1); and 0.88+/-0.03 and 6.84+/-0.45 mmolg(-1) for Cd(II) Cr(III) and Hg(II) ions, respectively. Similarly, the Dubinin-Radushkevich (D-R) constants beta, X(m,) and E were evaluated for the three metal ions. To check the selectivity of the sorbent, sorption of a number of elements was measured under similar conditions. Separation of Zn(II) from Cd(II); Cr(III) from I(I), Zr(IV), Se(IV), and Hg(II) from Se(IV) and Zn(II) can be achieved using this sorbent. This cheap material has potential applications in analytical chemistry, water decontamination, industrial effluent treatment and in pollution abatement.     

Production and optimization of biodiesel using mixed immobilized biocatalysts in packed bed reactor

Vegetable oils are used as raw materials for biodiesel production using transesterification reaction. Several methods for the production of biodiesel were developed using chemical (alkali and acidic compounds) and biological catalysts (lipases). Biodiesel production catalyzed by lipases is energy and cost-saving processes and is carried out at normal temperature and pressure. The need for an efficient method for screening larger number of variables has led to the adoption of statistical experimental design. In the present study, packed bed reactor was designed to study with mixed immobilized biocatalysts to have higher productivity under optimum conditions. Contrary to the single-step acyl migration mechanism, a two-step stepwise reaction mechanism involving immobilized Candida rugosa lipase and immobilized Rhizopus oryzae cells was employed for the present work. This method was chosen because enzymatic hydrolysis followed by esterification can tolerate high free fatty acid containing oils. The effects of flow rate and bed height on biodiesel yield were studied using two factors five-level central composite design (CCD) and response surface methodology (RSM). Maximum biodiesel yield of 85 and 81 % was obtained for jatropha oil and karanja oil with the optimum bed height and optimum flow rate of 32.6 cm and 1.35 L/h, and 32.6 cm and 1.36 L/h, respectively.     

The effect of nutrients shortage on plant’s efficiency to capture solar radiations under semi-arid environments

Radiation use efficiency (RUE) is considered critical for calculation of crop yield. The crop productivity can be improved by increasing the interception of solar radiation and maintaining higher RUE for plants. Irrigation water and nitrogen (N) supply are the main limiting factors for RUE in maize (Zea mays L.) across the semi-arid environments. Field experiments were conducted during two consecutive growing seasons (2009–2010) to optimize RUE in relation to N application timings and rates with varying irrigation water management practices. In experiment 1, three N application timings were made, while in experiment 2, three possible water management practices were used. In both experiments, five N rates (100, 150, 200, 250, and 300 kg N ha⁻¹) were applied to evaluate the effects of irrigation water and N on cumulative photosynthetic active radiation (PARi), dry matter RUE (RUE_DM), and grain yield RUE (RUE_GY). The results demonstrated that cumulative PARi and RUEs were not constant during the plant growth under varying the nutrients. The water and N significantly influenced cumulative PARi and RUEs during the both growing seasons. In experiment 1, the maximum cumulative PARi was observed by application of 250 kg N ha⁻¹ in three splits (1/3 N at V2, 1/3 N at V16, and 1/3 N at R1 stage), and the highest RUE_DM was achieved by the application of 300 kg N ha⁻¹. However, the highest RUE_GY was observed by application of 250 kg N ha⁻¹. In experiment 2, the maximum cumulative PARi was attained at normal irrigation regime with 250 kg N ha⁻¹, while the highest RUE_DM and RUE_GY were recorded at normal irrigation regime with the application of 300 kg N ha⁻¹. The regression analysis showed significant and positive correlation of RUE_GY with grain yield. Therefore, optimum water and N doses are important for attaining higher RUE, which may enhance maize grain yield semi-arid environment; this may be considered in formulating good agricultural practices for the environmental conditions resembling to those of this study.

     

Household preferences and willingness to pay (WTP) for freshwater quality improvement in Pakistan’s Swat River Valley

This two-part study investigates household preferences and willingness to pay (WTP) for water quality improvement of the Swat River in Pakistan. First, a four-point Likert scale was used to rank preferences for water quality benefits without using any financial metric. Results show that households have comparatively strong preferences for non-use benefits. Second, a contingent valuation question was designed to determine WTP for adopting a management plan developed exclusively for water quality improvement in the Swat River. The estimated annual mean WTP per household for water quality improvement is $2.40 when donating to an NGO. Generalizing this value to households living in Swat Valley would generate up to $544,000 per year. The present value aggregate benefit for 15 years would be sufficient to cover the present value of aggregate costs to adopt the management plan. A mandatory program that would require paying for the management plan generates half the WTP compared to the voluntary plan, but is still sufficient to cover costs and may be more feasible than a voluntary program because payment is assured.     

Measurement of soil radioactivity levels and radiation hazard assessment in southern Rechna interfluvial region, Pakistan

Rechna interfluvial region is one of the main regions of Punjab, Pakistan. It is the area which is lying between River Ravi and River Chenab, alluvial-filled. Radioactivity levels in soil samples, collected from southern Rechna interfluvial region, Pakistan, have been estimated by using gamma-ray spectrometric technique. ²²⁶Ra, ²³²Th, the primordial radionuclide ⁴⁰K, and the artificial radionuclide ¹³⁷Cs have been measured in the soil of the study area. The mean radioactivity levels of ²²⁶Ra, ²³²Th, ⁴⁰K, and ¹³⁷Cs were found to be 50.6 ± 1.7, 62.3 ± 3.2, 662.2 ± 32.1, and 3.1 ± 0.3 Bq kg^???1, respectively. The mean radium equivalent activity (Ra_eq), outdoor radiation hazard index (H _out), indoor radiation hazard index (H _in), and terrestrial absorbed dose rate for the area under study were determined as 190.8 ± 8.7 Bq kg^???1, 0.52, 0.65, and 69.8 nGy h^???1, respectively. The annual effective dose to the general public was found to be 0.43 mSv. This value lies well below the limit of 1 mSv for general public as recommended by the International Commission on Radiological Protection. The measured values are comparable with other global radioactivity measurements and are found to be safe for the public and the environment.     

An investigation of ergonomics analysis tools used in industry in the identification of work-related musculoskeletal disorders.

Web-based surveys were sent to Canadian certified ergonomists, Joint Health and Safety Committees (JHSCs) and health and safety certification trainers to understand better which ergonomics analysis tools were used in industry and help JHSCs obtain the necessary training required to reduce work-related musculoskeletal disorders (WMSDs). The results showed that most of the certified ergonomists used the Snook/Mital tables, the National Institute of Occupational Safety and Health (NIOSH) equation and rapid upper limb assessment (RULA) /rapid entire body assessment (REBA). The most frequently used methods by JHSCs to identify ergonomics risk were injury reports and worker complaints. The surveys for the health and safety certification trainers revealed that most curricula did not include ergonomics analysis tools. There appears to be a gap between what is recommended by certified ergonomists for JHSC, what is taught in training and what is used by JHSCs for ergonomics risk analysis. A better understanding, modifications in training curricula and education of JHSCs are needed to help reduce WMSDs.