Paper electrophoretic separations of some common pesticides : Determination of monocrotophos,rogor and malathion in soil samples

Abstract

Paper electrophoretic movements of a number of pesticides belonging to organophosphorus, organochlorine and pyethroid groups in various acid background electrolytes have been studied. The effect of pH and pKa of the acids on the movement of these pesticides have also been studied. It has been observed that the movement of most of the pesticides is enhanced with increase in the degree of ionisation of the acids (pKa) studied as background electrolytes. The movement also increases with increase in the pH of acids. On the basis of differential movement of pesticides towards cathode and anode, a number of separations have been achieved from binary mixtures. Monocrotophos, rogor and malathion have been determined quantitatively (28.6 ‐ 29.2 μg) in alcoholic extracts of soil samples.     

Upper trapezius fatigue in carpet weaving: the impact of a repetitive task cycle

Introduction. Shoulder disorders are one of the most prevalent musculoskeletal disorders among carpet weavers. The most important cause of these disorders is muscle fatigue. The aim of the present study is to investigate the effect of carpet weaving characteristics on upper trapezius (UTr) muscle fatigue during a task cycle. Method. In this cross-sectional study, 9 women and 3 men participated. During an 80-min cycle of carpet weaving, a times-series model was applied to assess electromyography amplitude and frequency changes. Result. According to the joint analysis of electromyogram spectrum and amplitude method, the participants experienced 0% force decrease, 0.9% recovery, 18% force increase and 72% fatigue in the left UTr. Furthermore, the rates of force decrease, recovery, force increase and fatigue in the right UTr were 18%, 18%, 18% and 45%, respectively. Fatigue in the right and the left UTr was reported to be the dominant state during one carpet weaving task cycle. Conclusion. Task cycle appears to have a significant impact on UTr fatigue in participants, and UTr fatigue can be considered a serious risk factor in shoulder musculoskeletal disorders. Hence, further studies should focus on better workstations and work–rest periods during various subtasks.     

Report: Healthcare waste characterization in Chittagong Medical College Hospital, Bangladesh

Healthcare waste management (HCWM) options are inconsistent in Bangladesh. One of the first critical steps in the process of developing a reliable waste management plan requires a comprehensive understanding of the quantities and characteristics of the waste that needs to be managed. This study took into consideration both the quantity and quality of the generated waste to determine the generation rates and physical properties of healthcare waste (HCW) in Chittagong Medical College Hospital (CMCH) and also to estimate the amount of infectious and non-infectious waste generated in different wards. CMCH, the second largest hospital in Bangladesh, comprises 34 wards, 12 of which were selected randomly. Waste materials were collected from these wards and then segregated and weighed. Waste generation per day was found to be 73.22 kg/ward, 1.28 kg/bed and 0.57 kg/patient. A total of 2490 kg of HCW was produced each day in CMCH (37% being infectious and the rest being non-infectious waste). Infectious waste was 27.07 kg per ward, 0.47 kg per bed and 0.21 kg per patient and the non-infectious waste was 46.15 kg per ward, 0.81 kg per bed and 0.36 kg per patient per day. HCW comprised eight categories of waste materials with vegetable/food waste being the largest component (50.21%) and varied significantly (P < 0.05) among the 12 different wards studied. The greatest amount of HCW was recorded (154 kg) in Orthopaedics followed by 96.66 kg in the Medicine Unit-3 and the smallest amount was recorded in Casualty (8.79 kg). The amount of HCW was positively correlated with the number of occupied beds (rxy = 0.79, P < 0.01). There is no structured form of medical waste treatment in CMCH and most waste materials are dumped in open areas for natural degradation or re-sold by scavengers. It is essential to develop a national policy and implement a comprehensive action plan for HCWM that will provide environmentally sound technological measures to improve HCWM in Bangladesh.     

Multivariate analysis of accumulation and critical risk analysis of potentially hazardous elements in forage crops

Environmental Monitoring and Assessment - Few estuaries remain unaffected by water management and altered freshwater deliveries. The Caloosahatchee River Estuary is a perfect case study for...     

A systematic review of emerging human coronavirus (SARS-CoV-2) outbreak: focus on disinfection methods,environmental survival,and control and prevention strategies

Recently, an outbreak of a novel human coronavirus which is referred to as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) (COVID-19) by the World Health Organization (WHO) was identified in Wuhan, China. To help combat the pandemic, a systematic review (SR) was performed to collect all available studies concerning inactivation methods, environmental survival, and control and prevention strategies. A comprehensive literature survey yielded 42 eligible studies which included in the SR. The results confirmed that the WHO recommended two alcohol-based hand rub formulations (ethanol 70–95% and 2-propanol 70–100%) had an efficient virucidal activity in less than 60 s by more and equal 4 log₁₀ (≥ 99.99) approximately and could be used for disinfection in public health and health-care facilities. The findings indicated that SARS-CoV-1 and SARS-CoV-2 can survive under different environmental conditions between 4 and 72 h approximately. The results also demonstrate that temperature and relative humidity are important factors in the survival of SARS-CoV-2. The main strategies recommended by the WHO to avoid contracting SARS-CoV-2 are hand washing several times in the day and maintaining social distancing with others. It is important to note that the more studies require addressing, the more possible airborne transmission due to the survival of SARS-CoV-2 in aerosols for 3 h approximately. We hope that the results of the present SR can help researchers, health decision-makers, policy-makers, and people for understanding and taking the proper behavior to control and prevent further spread of SARS-CoV-2.

     

Nano-inspired systems in food technology and packaging

Creation of food-based nanomaterials for food processing and packaging applications is actually gaining in importance. Indeed, the design of a suitable food carrier system controls the encapsulation efficiency, the product stability and release of bioactives such as micronutrients, antimicrobial compounds and antioxidants. The smaller size of nanomaterials provides higher thermodynamic and kinetic stability. Whereas the higher surface area enhances compound solubility. Nanoemulsions both encapsulate bioactive compounds effectively and address the food safety concerns of the fresh produce associated with foodborne pathogens. Nanoliposomes encapsulate bioactive whey peptides and fat-soluble vitamins with improved functionalities. Encapsulated bioactive molecules are released by diffusion into the surrounding environment after degradation of the surrounding polymeric matrix.     

Ultra-sensitive quantification of copper in food and water samples by electrochemical adsorptive stripping voltammetry

A new electrochemical adsorptive stripping voltammetry method was developed for the determination of trace amounts of copper in food and water samples. The study of electrochemical behavior of Cu ion indicated that Cu(II) and Schiff base formed a complex in H₃BO₄–NaOH buffer solution (pH?=?7.25). An accumulation potential of ?100 mV (vs Ag/AgCl) was applied while the solution was stirred for 60 s. The response curve was recorded by scanning the potential, and the peak current of ?0.31 V (vs Ag/AgCl) was recorded. The peak current and concentration of copper accorded with linear relationship in the range of 0.04–120 ng mL^?1. The relative standard deviation (for 12 ng mL^?1 of copper) was 1.73 %, and the detection limit was 0.007 ng mL^?1. The possible interference of some common ions was studied. The proposed method was applied to the determination of copper in water, rice, wheat, tea, milk, and tomato with satisfactory results.     

Quantitative assessment of medical waste generation in the capital city of Bangladesh

There is a concern that mismanagement of medical waste in developing countries may be a significant risk factor for disease transmission. Quantitative estimation of medical waste generation is needed to estimate the potential risk and as a basis for any waste management plan. Dhaka City, the capital of Bangladesh, is an example of a major city in a developing country where there has been no rigorous estimation of medical waste generation based upon a thorough scientific study. These estimates were obtained by stringent weighing of waste in a carefully chosen, representative, sample of HCEs, including non-residential diagnostic centres. This study used a statistically designed sampling of waste generation in a broad range of Health Care Establishments (HCEs) to indicate that the amount of waste produced in Dhaka can be estimated to be 37 ± 5 ton per day. The proportion of this waste that would be classified as hazardous waste by World Health Organisation (WHO) guidelines was found to be approximately 21%. The amount of waste, and the proportion of hazardous waste, was found to vary significantly with the size and type of HCE.     

New Biopolymer Nanocomposite of Starch-Graft Polystyrene/Montmorillonite Clay Prepared Through Emulsion Polymerization Method

Starch-g-polystyrene (Starch-g-PS)/Montmorillonite nanocomposites were prepared via free-radical graft copolymerization of styrene and starch in the presence of montmorillonite clay, by emulsion polymerization method using potassium persulfate (KPS) as an initiator/catalyst and sodium dodecylbenzensulfonate (SDBS) as an emulsifier. The nanocomposites with different clay content 0, 2.5, 5.0, 7.5 and 10 weight percent of starch were prepared and the changes in layer-stacked structures of the clay particles in the resulted nanocomposite compounds were examined by using of X-ray diffraction and FT-IR spectroscopy. Finally the thermal degradation behavior and morphology of nanocomposites were studied using thermal gravimetric analysis (TGA) and SEM, respectively.     

Modeling trihalomethane formation for Jabal Amman water supply in Jordan

A mathematical model that expresses Total trihalomethane (TTHM) concentration in terms of initial chlorine concentration, total organic carbon, bromide ion concentration, contact time, and pH is developed for Zai water treatment plant which supplies water to Jabal Amman. The developed mathematical model is for constant temperature of 20°C. To adjust model calculated TTHM concentrations for temperatures other than 20°C, another mathematical model that expresses TTHM growth rate as function of temperature is also developed. To test the ability of the two developed models in predicting TTHM concentrations throughout water supplies, a sampling program that aimed at measuring TTHM concentrations in addition to the predictors in the two developed mathematical models namely; chlorine concentration, bromide ion concentration, total organic carbon, temperature and pH throughout Jabal Amman water supply was conducted. The two developed mathematical models and WaterCad, which was used to determine water age, were used to predict TTHM concentrations throughout Jabal Amman water supply. Predicted TTHM concentrations were compared to actual TTHM concentrations measured during the sampling program. Results showed that there is good agreement between measured and, calculated TTHM concentrations, which means that the method presented in this paper, can be used to obtain good estimates of TTHM concentrations throughout networks.