Influence of sediment acidification on the bioaccumulation of metals in Ruditapes philippinarum

Background, aim and scope

The influence of pH (range 6.5–8.5) on the uptake of Zn, Cd, Pb, Cu, Ni, Cr, Hg, and As by juveniles of the clam Ruditapes philippinarum was examined in order to understand whether variation in sediment pH has significant repercussions on metal bioaccumulation.

Materials and methods

Clams were exposed to sediments collected in three locations in the Gulf of Cadiz (Huelva, Guadalquivir and Bay of Cadiz) and to contaminated particles derived from an accidental mining spill in Spain.

Results

With a notable exception of metal Cd, the concentration of metals within clams significantly increased (p?<?0.1) when sediment pH was lowered by one or two units. Moreover, the magnitude of this effect was dependent on the type of sediment contamination.

Discussion

Lower pH increases metal solubility and reduces or invert the metal sorption of metals to sediments. Increases in free metal ions in water favors metal uptake by clams, hence pH is an important factor controlling the mobility of these metals within sediments and their subsequent bioaccumulation within biota. Although sediment-water exchange of Cd can increase with acidification, this excess may be counterbalanced by the presence of ligands in seawater preventing the uptake by organism. Besides chlorines, Cd has also an affinity with carbonates and other ligands present in sea water. These Cd-carbonate complexes may reduce the bioavailable to organisms.

Conclusions

These results highlight the potential implications of sediment acidification, either due to the storage excess of organic matter or to the forced capture of CO₂, on the increasing metal availability to benthic organisms.

Recommendations and perspectives

This kind of studies should be increased to address the influence of acidification in the behavior, bioavailability, toxicity, and risk assessment of contaminants associated with sediments either above sub-seabed geological formations in marine environments or in high enriched by organic matter in estuarine areas. Recently, the capture of CO₂ in marine environments has been approved and started; it is necessary to address the potential impacts associated with leakages or other events occurring during the procedure of injection and storage of CO2.     

Characterization of poly(lactic acid) biocomposites filled with chestnut shell waste

The aim of this study was to determine thermal and mechanical properties and applicability of ground chestnut shell waste as a filler for poly(lactic acid) composites. The used amount of filler was ranging from 2.5 to 30 wt%. Spectroscopic analysis of composites and its ingredients was conducted by means of FT-IR method. The mechanical and thermal properties of the composites were determined in the course of static tensile test, Dynstat impact strength test, DMTA analysis, and DSC method. The fractured surface morphology of biocomposites was evaluated by SEM analysis. Incorporation of the filler influenced the overall mechanical properties of the composites characterized by high stiffness and lowered impact resistance. Fabricated composites with different amounts of non-reactive natural waste filler exhibited acceptable mechanical and thermal properties. Therefore, these composites can be used as eco-friendly, biodegradable materials for low-demanding applications.     

Determination of Cu and Ni incorporation ratios in Portland cement clinker

Cu and Ni are metals found in galvanic sludges; these sludges are considered hazardous due to their heavy metal content. The main objective of this work is to determine the incorporation amount of Cu and Ni in Portland clinker when a galvanic sludge containing these metals is added to the clinker raw-material. The influence of this addition on the clinkering reactions is evaluated as well as the possibility of co-incinerating galvanic sludges containing Cu and Ni in rotary cement kilns. This study also characterizes the galvanic sludge. Samples were prepared by additions from 0.25 to 5 wt.% of a galvanic sludge to an industrial clinker raw-material. The clinkering process was simulated in a laboratory device. The following techniques were applied to characterize the raw materials and the products of the tests: chemical analysis, differential thermal analysis (DTA) and thermogravimetric analysis (TG). Leaching tests were performed in the produced clinker samples in order to verify the incorporation of the studied metals in the clinker structure. The results led to the conclusion that additions of up to 2 wt.% of a galvanic sludge containing 2.4 wt.%Cu and 1.2 wt.% Ni to clinker raw-material do not affect the clinkering reactions and that these metals are totally incorporated into the clinker.     

Design and Application of Multi-layer Starch-Latex Blends as Phosphorous Delivery System

Journal of Polymers and the Environment - The search for highly productive agriculture has considerably increased the use of fertilizers, becoming a worrying source of environmental and health...     

Performance of compostable baby used diapers in the composting process with the organic fraction of municipal solid waste

In modern societies, disposable diapers constitute a significant percentage of municipal solid wastes. They have been traditionally landfilled or incinerated as only limited recycling processes are being implemented in some parts of Europe. With the implementation of separated collection systems for the organic fraction of municipal solid wastes (OFMSWs) and the need to preserve the environment, compostable diapers have appeared in the market to avoid the main environmental impacts associated to non-biodegradable disposable diapers. In this study, a full-scale composting of door-to-door collected OFMSW with a 3% (w/w) of compostable diapers has also been carried out. Previously, lab-scale experiments confirmed that almost 50% of carbon of compostable diapers is emitted as CO₂ under aerobic controlled conditions. The results obtained at full-scale demonstrate that both the composting process and the final end product (compost) are not altered by the presence of compostable diapers in crucial aspects such as pathogenic content, stability and elemental composition (including nutrients and heavy metals). The main conclusion of this study is that the collection of the OFMSW with compostable diapers can be a new way to transform this waste into high-quality compost.     

Planning waste cooking oil collection systems

This research has been motivated by a real-life problem of a waste cooking oil collection system characterized by the existence of multiple depots with an outsourced vehicle fleet, where the collection routes have to be plan. The routing problem addressed allows open routes between depots, i.e., all routes start at one depot but can end at the same or at a different one, depending on what minimizes the objective function considered. Such problem is referred as a Multi-Depot Vehicle Routing Problem with Mixed Closed and Open Inter-Depot Routes and is, in this paper, modeled through a mixed integer linear programming (MILP) formulation where capacity and duration constraints are taken into account. The model developed is applied to the real case study providing, as final results, the vehicle routes planning where a decrease of 13% on mileage and 11% on fleet hiring cost are achieved, when comparing with the current company solution.     

The use of agricultural substrates to improve methane yield in anaerobic co-digestion with pig slurry: Effect of substrate type and inclusion level

Anaerobic co-digestion of pig slurry with four agricultural substrates (tomato, pepper, persimmon and peach) was investigated. Each agricultural substrate was tested in co-digestion with pig slurry at four inclusion levels: 0%, 15%, 30% and 50%. Inclusion levels consisted in the replacement of the volatile solids (VS) from the pig slurry with the VS from the agricultural substrate. The effect of substrate type and inclusion level on the biochemical methane potential (BMP) was evaluated in a batch assay performed at 35 °C for 100 days. Agricultural substrate’s chemical composition was also analyzed and related with BMP. Additionally, Bacteria and Archaea domains together with the four main methanogenic archaeal orders were quantified using quantitative real-time TaqMan polymerase chain reaction (qPCR) at the end of the experiment to determine the influence of agricultural substrate on sludge’s microbial composition. Results showed that vegetable substrates (pepper and tomato) had higher lipid and protein content and lower carbohydrates than fruit substrates (persimmon and peach). Among substrates, vegetable substrates showed higher BMP than fruit substrates. Higher BMP values were obtained with increasing addition of agricultural substrate. The replacement of 50% of VS from pig slurry by tomato and pepper increased BMP in 41% and 44%, respectively compared with pig slurry only. Lower increments in BMP were achieved with lower inclusion levels. Results from qPCR showed that total bacteria and total archaea gene concentrations were similar in all combinations tested. Methanomicrobiales gene concentrations dominated over the rest of individual archaeal orders.     

Testosterone stress does not increase asymmetry of a hormonally mediated sexual ornament in a lizard

The theory that fluctuating asymmetry is sensitive to both environmental and genetic stress is gaining acceptance among evolutionary biologists. Most empirical work has focused on ornamental traits on the assumption that they are more susceptible to stress. In tegumentary coloration is a common ornament in nature, and frequently has a hormonal basis. Earlier studies in the lizard Psammodromus algirus indicate that testosterone induces the development of head nuptial coloration in large males and, at the same time, produces an increase of the ectoparasite load and higher mortality. Hence, the manipulation of testosterone levels may be a way to increase ornament expression and simultaneously create conditions that may make symmetrical development difficult. This positive covariation between character size and symmetry is opposite to that expected in theory for sexually selected traits, so the predicted elevation of asymmetry due to the treatment cannot be confounded by any intrinsic association between symmetry and character size. We firstly consider the effect that testosterone supplementation has on two variables that reflect the symmetry of bilateral throat nuptial coloration in large P. algirus males. Also, we examine whether ornament symmetry is positively associated with reproductive success, a prediction of theory of sexually selected symmetry. Testosterone treatment did not increase the fluctuating asymmetry of throat coloration. Size asymmetry increased with character size in individuals with a fragmented colour pattern, but changed suddenly to a highly symmetric pattern in individuals with non-fragmented coloration. Mirror asymmetry decreased steadily with character size. These results suggest that the development of coloration on both sides of the throat midline follows a random pattern. Asymmetry did not correlate with variables that estimated reproductive success, suggesting that asymmetry is not affected by physiological stress and that this trait is not a sexually selected signal in P. algirus. Received: 1 July 1996 / Accepted after revision: 4 May 1997