Validation of two air quality models for Indian mining conditions

All major mining activity particularly opencast mining contributes to the problem of suspended particulate matter (SPM)directly or indirectly. Therefore, assessment and prediction are required to prevent and minimize the deterioration of SPM due tovarious opencast mining operations. Determination of emission rate of SPM for these activities and validation of air quality models are the first and foremost concern. In view of the above, the study was taken up for determination of emission rate for SPMto calculate emission rate of various opencast mining activitiesand validation of commonly used two air quality models for Indianmining conditions. To achieve the objectives, eight coal and three iron ore mining sites were selected to generate site specific emission data by considering type of mining, method of working, geographical location, accessibility and above all resource availability. The study covers various mining activitiesand locations including drilling, overburden loading and unloading, coal/mineral loading and unloading, coal handling orscreening plant, exposed overburden dump, stock yard, workshop, exposed pit surface, transport road and haul road. Validation of the study was carried out through Fugitive Dust Model (FDM) and Point, Area and Line sources model (PAL2) by assigning the measured emission rate for each mining activity, meteorologicaldata and other details of the respective mine as an input to the models. Both the models were run separately for the same set ofinput data for each mine to get the predicted SPM concentrationat three receptor locations for each mine. The receptor locationswere selected such a way that at the same places the actual filedmeasurement were carried out for SPM concentration. Statisticalanalysis was carried out to assess the performance of the modelsbased on a set measured and predicted SPM concentration data. The value of coefficient of correlation for PAL2 and FDM was calculated to be 0.990-0.994 and 0.966-0.997, respectively, which shows a fairly good agreement between measured and predicted values of SPM concentration. The average index of agreement values for PAL2 and FDM was found to be 0.665 and0.752, respectively, which represents that the prediction by PAL2 and FDM models are accurate by 66.5 and 75.2%, respectively. These indicate that FDM model is more suited for Indian mining conditions.     

Heterogeneous Traffic Induced Effects on Vertical Dispersion Parameter in the Near Field of Roadways - a Wind Tunnel Study

The varying traffic parameters such as traffic volume, speed, shape and size, and terrain roughness conditions play a vital role on dispersion of pollutants in the near field of roadways. Simulation experiments were carried out in the Environmental Wind Tunnel (EWT) to evaluate the traffic induced effects on vertical dispersion parameter (σ _z ) for heterogeneous traffic conditions in the near field of roadways for evaluating the effect of variations in traffic volume, terrain roughness condition and approaching wind direction. The model vehicle movement system was fabricated and made operational in the EWT, which allowed the variation in traffic volume, speed and wind road inclination. Sixty-six hydrocarbon tracer experiments were performed to evaluate σ _z in the near field of roadways for variable traffic volume, three terrain roughness conditions and two approaching wind directions (i.e., 90° and 60°). The values of σ _z for heterogeneous traffic conditions were found to be higher for low roughness conditions in comparison to other two higher roughness conditions for various traffic volumes and approaching wind directions. This revised version was published online in July 2006 with corrections to the Cover Date.     

Measuring sorption of hydrophilic organic compounds in soils by an unsaturated transient flow method

Determination of sorption of hydrophilic, weakly sorbing organic compounds in soil by conventional batch methods using a slurried suspension is often prone to considerable errors because small changes in the solution concentration on equilibration must be accurately determined. This difficulty is exacerbated for compounds susceptible to degradation, which also decreases the solution concentration. The objective of this study was to determine sorption of hydrophilic pesticides by applying an unsaturated transient flow method, which enables determination of sorption at sufficiently small solution to soil ratios. The method makes use of piston-like displacement of the antecedent solution in equilibrium with sorbed phase when pesticide-free water is infiltrated into a soil column spiked with a pesticide. Pesticide sorption and the solution concentration are inferred from a plot of total pesticide content per unit mass of soil vs. water content in a region where the antecedent solution is accumulated. Thus, extraction of solution from relative dry soil is unnecessary. We tested this method for two hydrophilic pesticides, monocrotophos [dimethyl (E)-1-methyl-2-(methyl-carbamoyl) vinyl phosphate] and dichlorvos (2,2-dichlorovinyl dimethyl phosphate). The sorption coefficient, K(d), obtained for monocrotophos was slightly lower than that by batch method (K(d) = 0.10 vs. 0.19 L kg(-1)), whereas for dichlorvos, a compound highly susceptible to degradation, the unsaturated flow method yielded a much smaller K(d) (0.19 vs. 3.22 L kg(-1)). The K(d) values for both compounds were consistent with the observed retardation in the pesticide displacement in the columns. The proposed method is more representative of field conditions and particularly suitable for weakly sorbing organic compounds in soils.     

Metal accumulation in Raphanus sativus and Brassica rapa: an assessment of potential health risk for inhabitants in Punjab,Pakistan

Pakistan is an agricultural country and due to the shortage of clean water, most of the irrigated area (32,500 ha) of Pakistan was supplied with wastewater (0.876?×?109 m³/year). Concentrations of heavy metals in radish (Raphanus sativus) and turnip (Brassica rapa) taken from vegetable fields in Sargodha, Pakistan, were measured. Untreated wastewater was used persistently for a long time to irrigate these vegetable fields. A control site was selected that had a history of fresh groundwater irrigation. Mean metal concentrations were found for irrigation water, soil, and vegetables. In irrigation water, concentrations of Mo and Pb at three sites and Se at sites II and III were higher than the recommended limits. In vegetables, concentrations of Mo and Pb were above the maximum permissible limits. High bioconcentration factor was observed for Zn (12.61 in R. sativus and 11.72 in B. rapa) at site I and high pollution load index was found for Pb (3.89 in R. sativus and 3.87 in B. rapa) at site II. The differences in metal concentrations found in samples depended upon different soil nature and assimilation capacities of vegetables at different sites which in turn depended upon different environmental cues. The entrance of metal and metalloids to human body may happen through different pathways; however, the food chain is the chief route through which metals are transferred from vegetables to individuals. Health risk index observed for metals, (Mo, As, Ni, Cu, and Pb) higher than 1 indicated high risk through consumption of these vegetables at three sites.

     

Forest land conversion dynamics: a case of Pakistan

The present research focuses on estimating forest area change with respect to the ongoing forest land conversion. The study tests the hypothesis that forest land is being converted to the selected land use categories with high growth tendency and controlling deforestation rate to its half of the present level would significantly improve the land cover under forest. The rate of forest land conversion to other land use categories is analyzed and then compared with the total area expanded under three land use classes. We used Systems dynamic modeling approach to estimate forest area by simulating forest land conversion in Pakistan, projecting to 2030. The results show that rangeland, built-up area and cultivated land have increased over time; growth rate of built-up area (9%) is highest followed by rangeland area (1.7%) and cultivated area (0.3%), respectively; rangeland is the dominant category in terms of area expanded (0.74 m. ha). Sensitivity analysis showed that reducing deforestation rate to half of the past level of 1% could not significantly improve forest area; therefore, it is suggested that controlling deforestation alone is not an effective strategy unless drastic measures, e.g., demarcation of forest boundaries, land use control policy and afforestation campaign would be started in the country.     

Geo-accumulation index and contamination factors of heavy metals (Zn and Pb) in urban river sediment

The aim of the present study was to appraise the levels of heavy metal contamination (Zn and Pb) in sediment of the Langat River (Selangor, Malaysia). Samples were collected randomly from 15 sampling stations located along the Langat River. The parameters measured were pH, redox potential, salinity, electrical conductivity, loss of ignition, cation exchanges capacity (Na, Mg, Ca, K), and metal ions (Zn and Pb). The geo-accumulation index (I _geo) and contamination factor (C _f) were applied to determine and classify the magnitude of heavy metal pollution in this urban river sediment. Results revealed that the I _geo of Pb indicated unpolluted to moderately polluted sediment at most of the sampling stations, whereas Zn was considered to be within background concentration. The I _geo results were refined by the C _f values, which showed Pb with very high C _f at 12 stations. Zinc, on the other hand, had low to moderate C _f values. These findings indicated that the sediment of the Langat River is severely polluted with Pb. The Zn concentration at most sampling points was well below most sediment quality guidelines. However, 40% of the sampling points were found to have a Pb concentration higher than the consensus-based probable effect concentration of 128 mg/kg (concentrations above this value are likely to cause harmful effects). This result not only highlights the severity of Pb pollution in the sediment of the Langat River, but also the potential risk it poses to the environment.     

Chemical speciation and bioavailability of rare earth elements (REEs) in the ecosystem: a review

Rare earths (RE), chemically uniform group of elements due to similar physicochemical behavior, are termed as lanthanides. Natural occurrence depends on the geological circumstances and has been of long interest for geologist as tools for further scientific research into the region of ores, rocks, and oceanic water. The review paper mainly focuses to provide scientific literature about rare earth elements (REEs) with potential environmental and health effects in understanding the research. This is the initial review of RE speciation and bioavailability with current initiative toward development needs and research perceptive. In this paper, we have also discussed mineralogy, extraction, geochemistry, analytical methods of rare earth elements. In this study, REEs with their transformation and vertical distribution in different environments such as fresh and seawater, sediments, soil, weathering, transport, and solubility have been reported with most recent literature along key methods of findings. Speciation and bioavailability have been discussed in detail with special emphasis on soil, plant, and aquatic ecosystems and their impacts on the environment. This review shows that REE gained more importance in last few years due to their detrimental effects on living organisms, so their speciation, bioavailability, and composition are much more important to evaluate their health risks and are discussed thoroughly as well.     

Design and Characterization of PVA–Methacrylic Acid Based Smart Polymeric System for Controlled Release of Metoprolol

In the present work covalently crosslinked smart polymeric system of hydrogel based on poly vinyl alcohol (PVA) and methacrylic acid (MA) was designed by free radical polymerization with different compositions using glyoxal (40 % water solution) as crosslinker. It was observed that swelling of hydrogel had a pronounced enhancing effect on increasing the concentration of MA due to availability of more ionized carboxylic groups of MA but produced an opposite effect on increasing the concentration of glyoxal owing to less porous structure. As far as PVA is concerned, swelling did not show significant effect on increasing the concentration of PVA. Hydrophilic polymer PVA rich in hydroxyl group pertained to be highly interactive with water. It was examined that the release of metoprolol tartrate decreased with increased concentration of glyoxal, but increased with increase in concentration of MA. PVA/MA hydrogel was characterized by Fourier transform infrared spectroscopy and X-ray diffraction to study the structure and crystallinity of hydrogel respectively. Morphology was studied through scanning electron microscopy. Furthermore differential scanning calorimetry and thermogravimetric analysis were also performed to characterize thermal stability. It may be concluded that the mechanism of drug release was mainly non-Fickian diffusion.     

Agroforestry environment,potentiality and risk in India: a remote sensing and GIS understanding

Environment, Development and Sustainability - The study utilized the tree covers per cent, agroforestry suitability, present and future (2050) climate, agriculture vulnerability (2050), percentage...     

Quantification,characteristics, and distribution of microplastics released from waste burning furnaces and their associated health impacts

Although investigation of microplastics (MPs) present in air environment has been intensively carried out, quantification, characteristics, and distribution of MPs released from the waste burning furnace (WBF) has been missing in literature. The aim of this study was to characterize the presence of MPs released from WBFs and analyze their associated health impacts. The examined locations were at two WBFs (nominated as TPS1 and TPS2) in Sidoarjo, Indonesia. MPs were collected using a 9 cm diameter glass beaker for a period of 8 h at two different sampling points, which are 3 and 15 m from each WBF. Several characteristics of MPs in terms of the number of particles, size, shape, color, and polymer type were comprehensively characterized. This study found that the obtained MPs were of fiber type and in the range of 46–77 and 41–59 particles at TPS1 and TPS2, respectively. In general, the polymer types of MPs were, respectively, cellophane and polytetrafluoroethylene at TPS1 and TPS2. Moreover, it was estimated that about 1.9–2.3 MPs can enter the human body via inhalation. This study offers a pilot examination of MPs released from WBF and findings from this study are crucial to provide new knowledge as a basis to carefully regulate the use of WBF particularly that are located closely to local community.