Siting MSW landfill using weighted linear combination and analytical hierarchy process (AHP) methodology in GIS environment (case study: Karaj)

Selection of landfill site is a complex process and needs many diverse criteria. The purpose of this paper is to evaluate the suitability of the studied site as landfill for MSW in Karaj. Using weighted linear combination (WLC) method and spatial cluster analysis (SCA), suitable sites for allocation of landfill for a 20-year period were identified. For analyzing spatial auto-correlation of the land suitability map layer (LSML), Maron’s I was used. Finally, using the analytical hierarchy process (AHP), the most preferred alternative for the landfill siting was identified. Main advantages of AHP are: relative ease of handling multiple criteria, easy to understand and effective handling of both qualitative and quantitative data.As a result, 6% of the study area is suitable for landfill siting and third alternative was identified as the most preferred for siting MSW landfill by AHP.The ranking of alternatives were obtained only by applying the WLC approach showed different results from the AHP. The WLC should be used only for the identification of alternatives and the AHP is used for prioritization. We suggest the employed procedure for other similar regions.     

Evaluation of cleaning and disinfection protocols for commercial farm equipment following a foreign animal disease outbreak

This study evaluated the microbiocidal efficacy of a cleaning and disinfection (C&D) treatment using stainless-steel coupons applied to three common types of animal mortality transport vehicles when exposed to agricultural conditions. Metal test coupons, inoculated with bacteriophage MS2, were affixed to the undercarriage of three types of animal mortality transport vehicles at various locations. Coupons were grimed by maneuvering the test vehicles down a series of wet dirt roads. Coupons were attached and extracted at various points to evaluate C&D performance with and without grime. C&D efficacy using a water-supplied pressure washing system and a dilute sodium hypochlorite (NaOCl) solution was determined by comparing the difference in recovered viable virus between positive control coupons and test coupons. The results demonstrated a relatively high surface decontamination efficacy, with all but one location showing >5 log reduction of MS2. Coupons located on the roll-off truck's inside-back bumper contained the highest level of grime and resulted in a 4 log reduction of MS2. There was no significant difference in C&D efficacy across vehicle types, but locations impacted by grime and lack of accessibility achieved lower efficacies on average. These findings suggest that common C&D protocols, when applied to farm mortality transport vehicles, are effective. Hard-to-access locations containing high levels of grime may be candidates for additional targeted treatment.     

Sorption of strontium on bentonite

Sorption of Sr on bentonite was studied using the batch technique. Distribution coefficients (K_d) were determined as a function of contact time, pH, sorbent and sorbate concentration and temperature. The data were interpreted in terms of Freundlich, Langmuir and Dubinin-Radushkevich isotherms. Thermodynamic parameters for the sorption system were determined at three different temperatures. The positive value of the heat of sorption, ΔH° = 30.62 kJ/mol at 298 K, shows that the sorption of strontium on bentonite is endothermic. The negative value of the free energy of sorption, ΔG° = −10.69 kJ/mol at 298 K, shows the spontaneity of the reaction. ΔG° becomes more negative with increasing temperature, which shows that the sorption process is more favorable at higher temperatures. The mean free energy for sorption, E 9 kJ/mol, suggests that ion exchange is the predominant mode of sorption in the Sr concentration range studied, i.e. 0.01 – 0.3 mol/dm³. The presence of complementary cations depresses the sorption of strontium on bentonite in the order Ca²⁺>Mg²⁺>K⁺>Na⁺. Some organic complexing agents and natural ligands also affect the sorption of strontium. The desorption studies with ground water at low strontium loadings on bentonite show that about 90% of Sr is irreversibly sorbed on the bentonite.     

Municipal solid waste effective stress analysis

The mechanical behavior of municipal solid waste (MSW) has attracted the attention of many researchers in the field of geo-environmental engineering in recent years and several aspects of waste mechanical response under loading have been elucidated. However, the mechanical response of MSW materials under undrained conditions has not been described in detail to date. The knowledge of this aspect of the MSW mechanical response is very important in cases involving MSW with high water contents, seismic ground motion and in regions where landfills are built with poor operation conditions. This paper presents the results obtained from 26 large triaxial tests performed both in drained and undrained conditions. The results were analyzed taking into account the waste particles compressibility and the deformation anisotropy of the waste samples. The waste particles compressibility was used to modify the Terzaghi effective stress equation, using the Skempton (1961) proposition. It is shown that the use of the modified effective stress equation led to much more compatible shear strength values when comparing Consolidated-Drained (CD) and Consolidated-Undrained (CU), results, explaining the high shear strength values obtained in CU triaxial tests, even when the pore pressure is almost equal to the confining stress.     

砂土与EPS颗粒混合的轻质土(LSES)临界循环应力比的试验研究

循环荷载下,砂土与EPS颗粒混合的轻质土(LSES)存在临界循环应力比Sth,将割线弹性模量衰减系数δ与循环次数的关系曲线能保持平缓的最大循环应力比定义为Sth,它是结构稳定与破坏两种状态的界限指标,根据动三轴试验结果,认为影响Sth的主要因素有围压、水泥掺量和EPS颗粒含量。一般来说,水泥掺量的增加、围压和EPS颗粒含量的减小均会提高Sth,但由于高围压下的结构重塑,水泥掺量低且EPS颗粒含量高的试样的Sth表现出一些不同的性状。     

Incorporating organizational factors into probabilistic risk assessment of complex socio-technical systems: Principles and theoretical foundations

The current generation of Probabilistic Risk Analysis (PRA), particularly those for technical systems, does not include an explicit representation of the possible impacts of organization and management on the safety performance of equipment and personnel. There are a number of technical challenges in developing a predictive model of organizational safety performance. There is a need for a widely accepted and theoretically sound set of principles on which models of organizational influences could be developed and validated. As a result of a multidisciplinary effort, this paper explores the feasibility of developing such principles and proposes a set of principles for organizational safety risk analysis. Then, as a realization of the proposed modeling principles, a safety risk framework, named Socio-Technical Risk Analysis (SoTeRiA), is developed. SoTeRiA formally integrates the technical system risk models with the social (safety culture and safety climate) and structural (safety practices) aspects of safety prediction models, and provides a theoretical basis for the integration. A systematic view of safety culture and safety climate leaves an important gap in modeling complex system safety risk, and SoTeRiA, describing the relationship between these two concepts, bridges this gap. The framework explicitly recognizes the relationship among constructs at multiple levels of analysis, and extends the PRA framework to include the effects of organizational factors in a more comprehensive and defensible way.     

Improved power density and Cr/Pb removal using ozone in a microbial desalination cell

Environmental Chemistry Letters - Microbial desalination cells are promising bio-electrochemical technologies for water desalination, treating wastewater and bioelectricity production. In this...     

Obstetrical outcomes following amniocentesis performed after 24 weeks of gestation: A systematic review and meta-analysis

To evaluate obstetrical outcomes for women having late amniocentesis (on or after 24 weeks). Electronic databases were searched from inception to January 1st, 2023. The obstetrical outcomes evaluated were gestational age at delivery, preterm birth (PTB) < 37 weeks, PTB within 1 week from amniocentesis, premature prelabor rupture of membranes (pPROM), chorionamnionitis, placental abruption, intrauterine fetal demise (IUFD) and termination of pregnancy (TOP). The incidence of PTB <37 weeks was 4.85% (95% CI 3.48–6.56), while the incidence of PTB within 1 week was 1.42% (95% CI 0.66–2.45). The rate of pPROM was 2.85% (95% CI 1.21–3.32). The incidence of placental abruption was 0.91% (95% CI 0.16–2.25), while the rate of IUFD was 3.66% (95% CI 0.00–14.04). The rate of women who underwent TOP was 6.37% (95%CI 1.05–15.72). When comparing amniocentesis performed before or after 32 weeks, the incidence of PTB within 1 week was 1.48% (95% CI 0.42–3.19) and 2.38% (95% CI 0.40–5.95). Amniocentesis performed late after 24 weeks of gestation is an acceptable option for patients needing prenatal diagnosis in later gestation.     

Production and Characterization of Sodium Alginate/Gum Arabic Based Films Enriched with Syzygium cumini Seeds Extracts for Food Application

Journal of Polymers and the Environment - Biodegradable sodium alginate/gum Arabic (SG) films were obtained. The influence of Syzygium cumini seeds extract (SCSE) incorporation in SG films on...     

Process Optimization and Adsorptive Mechanism for Reactive Blue 19 Dye by Magnetic Crosslinked Chitosan/MgO/Fe3O4 Biocomposite

Journal of Polymers and the Environment - A new biocomposite cross-linked glutaraldehyde-chitosan/MgO/Fe3O4 (CTS-GL/MgO/Fe3O4) adsorbent with magneto-responsiveness was prepared and applied for the...