Pyrolysis of the tetra pak

This study deals with pyrolysis of tetra pak which is widely used as an aseptic beverage packaging material. Pyrolysis experiments were carried out under inert atmosphere in a batch reactor at different temperatures and by different pyrolysis modes (one- and two-step). The yields of char, liquid and gas were quantified. Pyrolysis liquids produced were collected as three separate phases; aqueous phase, tar and polyethylene wax. Characterization of wax and the determination of the total amount of phenols in aqueous phase were performed. Chemical compositions of gas and char products relevant to fuel applications were determined. Pure aluminum can be also recovered by pyrolysis.     

Marine Parks for protection and tourism in Turkey

Protected Turkish areas in the Mediterranean region are compared with those of other Mediterranean countries. Policies followed in Turkey for conservation protection of the natural and cultural environment and the use of coastal resources for tourism are discussed. The purpose and application of Turkish law is examined with respect to the interaction between the protection of coastal areas and tourism. Modifications on the administrative and management regulations in Turkey enabling a better use of coastal areas is suggested by combining coastal tourism and protection. The necessity and importance of estabilishing and managing Marine Parks in short-and long-term plans are acknowledged.     

Seasonal Variability of Heavy Metals in Surface Sediment of Lake Sapanca, Turkey

Lake Sapanca is exposed to heavy urbanization and industrialization because of its natural beauty and its proximity to the metropolitan İstanbul, Turkey. In this study, it was aimed to investigate seasonal changes of some heavy metals (Pb, Cr, Cu, Mn, Ni, Zn and Cd) concentration of surface sediment. Nine different stations were chosen as sampling points. Samples were taken every three months and the seasonal and annual average concentration of the elements were determined. Seasonal highest values of heavy metals were observed as follows; Cr, Cu, Mn, Ni and Zn in Summer, Cd in Autumn. There was no seasonal difference for Pb, Cr and Cd. It seems that Lake Sapanca has not been polluted yet. However, it was found that Cu and Ni concentrations in surface sediment exceed lowest effect level.     

Investigation of heavy metal content in the suspended particulate matter and sediments of inner Gokova Bay and creeks

The Bay of Gokova in Southeastern Aegean Sea (Turkey) is important by the potential of agricultural, municipal, and tourism activities. In addition, there is no industrial plant within the area in the Aegean Sea. Kad?n Creek (Azmak) and Ak?ap?nar Creek (Azmak) flowing into the inner Gokova Bay are one of the important factors in determining the character of the inner Gokova Bay. In this study, nine stations were selected in the inner Gokova Bay, Kad?n Creek, and Akcap?nar Creek. The concentrations of Cd, Cu, Fe, Pb, and Zn were measured in suspended particulate matter (SPM) and sediments. The samples of sediments and SPM were collected in between February 2008 and September 2008. The aim of the study is searching the change of concentrations of Cd, Cu, Fe, Pb, and Zn in suspended particulate matter and sediments in the inner Gokova bay, Kad?n Creek, and Ak?ap?nar Creek. It has been identified that the metal concentrations in the creeks are higher than the metal concentrations in the marine environment. It has also been observed that the concentrations of Pb, Cd, and Cu in summer season have been higher than in the winter season, but the concentrations of Fe and Zn have not shown a significant difference between in summer and winter seasons. The obtained results show that the some heavy metals are caused by the agricultural, municipal, and tourism activities operating in the coastal areas and terrestrial environment, and they are transported from the creeks to the Gokova Bay by suspended particulate matter.     

A wind-solar PV hybrid power system with battery backup for water pumping in remote localities

After energy, water is the most critical commodity to be made available to people to keep them alive. Saudi Arabia has vast land and people are living in all regions. Most of these are connected to national grid but some are not, especially in remote areas like in the north, south, and west south. Pumping water in remote areas for domestic needs like agriculture and animals beside human needs is essential and require regular power supply. The present idea of wind-PV-Battery hybrid power system based on 100% renewable source is being proposed to utilize and tested in some of the regions on experimental bases. Of the five locations chosen for the purpose, namely Dhahran, Riyadh, Jeddah, Guriat and Nejran, some are good from both wind and solar intensity point of view some have good winds only and some good solar only. Nearly optimal size of PV-Wind water pumping system is determined for each of these sites considering the availability of solar and wind energy distributions throughout the year in these sites. It is shown that the monthly total water pumping capacity when using nearly optimal PV-Wind water pumping system is fairly uniform throughout the year except for the sites of Guriat and Riyadh. In these sites higher water pumping capacity is observed during the spring and summer months. On the other hand the cost of underground water pumping is found to vary between 6 to 12 US¢/m³ for the five sites considered.     

Degradation of fipronil under laboratory conditions in a tropical soil from sirinhaém pernambuco,Brazil

The objective of this research was to assess the degradation of fipronil [5-amino-1-(2,6-dichloro-α,α,α -trifluoro-p-tolyl)-4-trifluoromethylsulfinylpyrazole-3-carbonitrile] in soils from sugar cane fields in Northeastern Brazil. Degradation experiments were carried out under laboratory conditions (controlled temperature and in the dark), where sterile and non-sterile soils (Ustoxs) were incubated [under moisture content of 55% of the water holding capacity (WHC)] and analyzed for fipronil disappearance and metabolite formation. Microbial communities present in the soil degrade fipronil. However, biodegradation seems to be dependent on the bioavailability of the fipronil and the half-life according to the zero-order model. Fipronil degradation rate appeared to be biphasic. Degradation fipronil ranged from 83 days (initial concentration = 978 ng g^{? 1}; short-term experiment) to 200 days (initial concentration = 689 ng g^{? 1}; long-term experiment). This an initial slower rate followed by a faster rate after 90 days of incubation may lead to shorter half-life than that calculated with the zero-order model. The sulfone derivative (an oxidation product) was the predominant metabolite, but the sulfide (a reduction product) and amide (a hydrolysis product) derivatives were also formed under non-sterile conditions after 120 days of incubation. The metabolites underwent further biodegradation, particularly the sulfone derivative. Bioavailability appears to affect fipronil degradation in soils with an effective capacity to adsorb fipronil (such as Ustoxs), while redox potential was important for the formation of metabolites. Despite the fine texture, more aerobic sites were present, thus favoring the formation of the sulfone metabolite over that of the sulfide metabolite. Therefore, microaggregation of Ustoxs, with high clay content, played a very important role in determining the types of metabolites formed.     

Development of a Natural Chewing Gum from Plant Based Polymer

In this study, Kenger gum obtained from Kenger plant (Gundelia tournefortii) was used in the production of biodegradable and edible chewing gum. Kenger gum was able to be softened by thermal process to improve its textural properties. 80% methanolic extract of gum showed 195.6 gallic acid equivalents (GAE) mg/100 g gum antioxidant activity and 17.9 mm inhibition zone for Escherichia coli O157:H7 as an antimicrobial activity. Softened Kenger gum was also characterized by texture properties, scanning electron microscope (SEM) images and chemical compositions. Hardness value of gum decreased from 864 to 238 g which was comparable to commercial chewing gums. Softened Kenger gum was observed to be a perfect substitute for a synthetic gum base in the production of a conventional chewing gum. Moreover, resilience value was remarkably found to be the best standard parameter to select chewing gums with desired textural properties.     

A puzzle over ecological footprint,energy consumption and economic growth: the case of Turkey

Environmental and Ecological Statistics - The paper investigates the non-linear causality from energy consumption and economic growth to ecological footprint for the case of Turkey by employing...     

Investigation of Synthesis of Copolymers from the Waste Products of Industrial Oil Refinement having Adhesion Properties and Strength to the Thermal Destruction

In this study, the waste products of industrial vegetable oil refinement were transformed into the glycidyl ester for preventing the effects of them to the environment, the ways for evaluating them in polymer chemistry were investigated, copolymers having high adhesion property and strength to the thermal destruction were synthesized and the area of their usage was determined. For this reason, the waste product of sunflower oil refination as a vegetable oil in the industry; soap stock (SS) was converted to the unsaturated glycidyl esters by the interaction with epichlorohidrine in the alkaline medium. After that the copolymerization of synthesized unsaturated glycidyl esters and the other waste product of oil refinement fatty acid (FA) with styrene in the radicalic initiator medium were investigated and copolymers that have high strength to the thermal destruction and adhesion property were synthesized. From the results of TGA and DTA analysis, it was determined that synthesized copolymers have low loss of weight at high temperature. The structures of copolymers were fixed by spectral and chemical analysis methods.     

Biological treatment of synthetic wastewater containing 2,4 dichlorophenol (DCP) in an activated sludge unit

Chlorophenol compounds present in many chemical industry wastewaters are resistant to biological degradation because of the toxic effects of such compounds on microorganisms. Synthetic wastewater containing different concentrations of 2,4 dichlorophenol (DCP) was subjected to biological treatment in an activated sludge unit. Effects of feed DCP concentration on COD, DCP, and toxicity removals and on sludge volume index were investigated at a constant sludge age of 10 days and hydraulic residence time (HRT) of 25 h. The Resazurin method based on dehydrogenase activity was used for assessment of toxicity for the feed and effluent wastewater. Percent COD, DCP, and toxicity removals decreased and the effluent COD, DCP, and toxicity levels increased with increasing feed DCP concentrations above 150 mgl(-1) because of inhibitory effects of DCP. Biomass concentration in the aeration tank decreased and the sludge volume index (SVI) increased with feed DCP concentrations above 150 mgl(-1) resulting in lower COD and DCP removal rates. The system should be operated at feed DCP concentrations of less than 150 mgl(-1) in order to obtain high COD, DCP, and toxicity removals.