Effect of specimen size and grain size on deformation in microextrusion

Miniaturization of systems and devices continues unabated, which in turn requires the production of microscale components. Similar to the macroscale process, microextrusion provides a means to fabricate metallic micropins having characteristic dimensions on the order of 1 mm or less with a lower-cost, high-throughput process. In this paper, the effect of the specimen size and grain size on deformation during microextrusion is investigated. Microhardness, microstructure, and X-ray texture analyses show that when the grain size becomes comparable to the specimen feature size, together with miniaturization, penetration of the shear deformation occurs. As a result, the coarse-grained structure has higher hardness than the fine-grained structure, especially in the central regions of the cross-section for the two smallest size extrusion cases investigated, which have Ø0.76/0.57 mm and Ø1.5/1.0 mm dimensions before and after extrusion, respectively. For the largest size extrusion case investigated, Ø2.0/1.33 mm pins, the coarse-grained structure has a lower hardness than the fine-grained one, which is typical for macroscale processes and consistent with the Hall–Petch relationship.     

Assessment of groundwater quality of the Tatlicay aquifer and relation to the adjacent evaporitic formations (Cankiri,Turkey)

One of the most important hydrogeologic problems in and adjacent areas of evaporitic formations is severe quality degradation of groundwaters. These kinds of groundwaters contain high content of dissolved solids and generally have some limitations for use. Tatlicay basin (north-central Turkey) is an example to effects of the evaporites on groundwater quality in the adjacent alluvium aquifer. Gypsum and anhydrites in the two evaporite formations (Bayindir and Bozkir) effect of the groundwater quality in the alluvium adversely, by dissolution of the evaporites by surface drainage and infiltration into the alluvium aquifer (widespread effect) and by infiltration of low quality gypsum springs (local effect) into the aquifer. Evaporitic formations significantly increased EC, TDS, Ca and SO₄ parameters in the alluvium aquifer in the central and downstream regions. EC has increased roughly from 500–800 to 1,700–2,000 μS/cm, Ca has roughly increased from 3–4 to 10 meq/l, SO₄ has increased 0.5–1 to 11–12 meq/l. Consequently, three clusters were distinguished in the basin; (1) nonevaporitic waters in low TDS, Na, Ca, Mg, Cl and SO₄, (2) diluted waters in high TDS and relatively high Cl, moderate-relatively high Na, Ca, Mg, SO₄, (3) gypsum springs in highest TDS, Ca, SO₄, but moderate Mg and low Na, Cl.     

Concentration of heavy metals in the food web of Lake Egirdir, Turkey

The concentration of heavy metals (Cr, Cd, Hg and Pb,) was determined by atomic absorption spectrophotometry in sediment, water, plankton and fish samples from Lake Egirdir in South-Western Turkey. Lake Egirdir is an important bird nesting and visiting areas, and it is also used as irrigation and drinking water source. The heavy metal concentrations were in the order Cd > Pb > Cr > Hg in water, Cr > Pb > Cd > Hg in sediment, Pb > Cd > Cr > Hg in plankton, Cd > Cr > Pb > Hg in the muscle and Cd > Pb > Cr > Hg in the gills of Ctenophatyngodon idella. The significant differences of concentrations occurred in water, sediment, plankton and fish tissues (Chi square test, p < 0.05). The concentrations of the heavy metals in water and fish tissues of three years old, were above the maximum permissible level for human consumption.     

Analysis of Atmospheric Conditions during Air Pollution Episodes in Ankara,Turkey

ABSTRACT

This paper presents a detailed analysis of the meteorological conditions that are associated with strong air pollution episodes in Ankara, Turkey. Based on climatological and air quality data [SO₂ and TSP (total suspended par-ticulates)] obtained for the winter months during 19891994, the analysis showed that the presence of weak atmospheric pressure gradients and warm air advection were the most important factors leading to high SO₂ and TSP concentrations. In addition, the onset of the high air pollution episodes was generally associated with a trend toward negative vorticity at the 850-hPa level.     

Classification of dimension stone wastes

Purpose

For countries in which the stone industry is well developed, opposition to quarry and plant waste is gradually increasing. The primary step for waste control and environmental management is to define the problem of concern. In this study, natural building stone wastes were classified for the first time in the literature.

Methods

Following on-site physical observations and research at more than 50 quarries and 20 plants, stone wastes were classified as (1) solid, (2) dust and (3) semi-slurry, slurry and cake.

Conclusions

As a result of this study, the characteristics of wastes, their main environmental threats and the industries in which wastes could be used were defined for each group.     

Assessment of the radiological impacts of utilizing coal combustion fly ash as main constituent in the production of cement

The purpose of this study is to assess potential radiological impacts of utilizing pulverized fly ash (PFA) as a constituent in ordinary Portland cement. For this purpose, the activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K in samples of PFA and Portland cement containing 15%, 20%, and 25% by mass PFA were measured using gamma-ray spectrometry with HPGe detector. The mean activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K were found as 366.6, 113.7, and 460.2 Bq kg^???1, 94.2, 25.9, and 215.3 Bq kg^???1, 113.7, 34.3, and 238.3 Bq kg^???1, and 124.2, 41.8, and 279.3 Bq kg^???1 for the examined samples of PFA, Portland cement with 15%, 20%, and 25% by mass PFA, respectively. Radiological parameters such as radium equivalent activity, external exposure index (activity concentration index), internal dose index (alpha index), indoor absorbed gamma dose rate, and the corresponding the annually effective dose were assessed for Portland cement samples containing three percentages (15%, 20%, and 25%) by mass PFA. The results of assessment show that all Portland cement samples are within the safe limits recommended for building materials for dwellings.     

Airborne and soilborne microfungi in the vicinity Hamitabat Thermic Power Plant in Kirklareli City (Turkey), their seasonal distributions and relations with climatological factors

Soil and air samples of seven different localities around Hamitabat Thermic Power Plant, 10 km far away from Luleburgaz/Kirklareli (Turkey), were taken between the years 2003 and 2004 with seasonal intervals. The samples were brought to the laboratory and their microfungal identifications were done. From the air samples, 737 microfungi colonies were isolated comprising 26 species belonging to eight genera. From soil samples, 170.6 × 10⁴ colony-forming unit (CFU)/g was isolated from 33 species belonging to 16 genera. The most isolated genus from air samples was Alternaria (324 CFU, 43.96%), followed by Cladosporium (208 CFU, 25.52%) and Phoma (44 CFU, 5.40%). Penicillium was the most isolated genus from the soil samples with a value of 560,000 CFU/g (32.8%), followed by Fusarium (226,000 CFU/g, 13.12%) and Aspergillus (154,000 CFU/g, 9.03%). Among these species, Alternaria citri and Alternaria alternata are the most abundant species in air with 164 and 107 CFU, respectively, whereas Fusarium graminearum and Penicillium citrinum are the most abundant species in soil with CFU per gram values of 17.8 × 10⁴ and 1.3 × 10⁵. Correlation analysis was applied to determine whether or not there was a relationship between colony number of isolated fungal genera and meteorological factors. Some parameters of soil samples’ incontent during the research period were calculated using a computer analysis program. From the air samples, a positive correlation was found between relative humidity and Alternaria colonial counts and Cladosporium spore counts (r?=?0.912 and r?=?1.000, respectively). Similarly, with the analysis of soil samples, a positive correlation between colonial counts of Alternaria and soil pH and a positive correlation between colonial counts of Aspergillus and Penicillium and salt percentage concentration of soil were found.     

Re-usage of waste foundry sand in high-strength concrete

In this study, the potential re-use of waste foundry sand in high-strength concrete production was investigated. The natural fine sand is replaced with waste foundry sand (0%, 5%, 10%, and 15%). The findings from a series of test program has shown reduction in compressive and tensile strengths, and the elasticity modulus which is directly related to waste foundry inclusion in concrete. Nevertheless the concrete with 10% waste foundry sand exhibits almost similar results to that of the control one. The slump and the workability of the fresh concrete decreases with the increase of the waste foundry sand ratio. Although the freezing and thawing significantly reduces the mechanical and physical properties of the concrete. The obtained results satisfies the acceptable limits set by the American Concrete Institute (ACI).