Estimation of Biogas Generation from a Uasb Reactor via Multiple Regression Model

In this study, regression analysis based an estimation model for biogas generated from an up-flow anaerobic sludge blanket (UASB) reactor treating landfill leachate is developed using several leachate parameters, such as pH, conductivity, total dissolved solids, chemical oxygen demand, alkalinity, chloride, total Kjeldahl nitrogen, ammonia, total phosphorus. These landfill leachate parameters are monitorized over a period of 1000 days at 35 ± 1°C in the UASB reactor. In order to develop the best model giving highest estimation performance, eight model equations including different input parameter combinations are analyzed. Based on the results of regression analysis, the best coefficients of the model equation are determined. As a conclusion, the developed model in this study can give accurate biogas amount prediction for the USAB reactor-based leachate treatment system.     

Resident perceptions of livelihood impacts arising from the Kızıldağ National Park,Turkey

In this study, perceptions, needs, expectations and participation levels in the park management of residents of the K?z?lda? National Park were investigated. It was focused on especially how residents’ livelihood was affected by establishment and management of K?z?lda? National Park. It was examined why residents do not support protection efforts. Research data were obtained with the help of a survey form prepared to determine the perceptions of residents living in the national park. For the analyses of obtained data, statistics package program (SPSS 20) was used and also independent-samples t test and one-way analyses of variance were applied. As a result, the most important negative effects were loss of income and changes in traditional lifestyle. The most affected group from these negative effects was the ones dealing with animal husbandry. For the sustainable management and protection of national park, sense of belonging should be brought to residents so as to increase participation, traditional lifestyle of residents should be conserved and new sources of income should be generated for residents. To improve the participation of residents in national park management, community engagement mechanisms can be used as a tool.     

Bioclimatic characteristic of oak species Quercus macranthera subsp. syspirensis and Quercus petraea subsp. pinnatiloba in Turkey

This study was carried out to determine some bioclimatic characteristics such as humidity category (Q2), winter variant (m), the length of the dry season (LDS) and the dry season water deficit (DSWD) of naturally growing two endemic oak taxa, Quercus macranthera subsp. syspirensis and Q. petraea subsp. pinnatiloba, living in Turkey. Our findings showed that bioclimatic tolerance range of Q. macranthera subsp. syspirensis possess 7 different types of Mediterranean bioclimate while Q. petraea subsp. pinnatiloba had 8 of them. Although Q. macranthera subsp. syspirensis was ranging among the semiarid, freezing and very cold, Q. petraea subsp. pinnatiloba was among sub-humid, freezing and very cold ambient. It was briefly established that Q. macranthera subsp. syspirensis prefers semi-arid and very cold/freezing conditions and Q. petraea subsp. pinnatiloba prefers sub-humid and cold/very cold climatic conditions.     

A review of plastic pollution in aquatic ecosystems of Turkey

Environmental Science and Pollution Research - Turkey is one of the major plastic pollution sources in the Mediterranean and the Black Sea. This review summarizes present information, data, and...     

Geoenvironmental behavior of foundry sand amended mixtures for highway subbases

The high cost of landfilling and the potential uses of waste foundry sands have prompted research into their beneficial reuse. Roadways have a high potential for large volume usage of the foundry sands. A laboratory testing program was conducted on soil-foundry sand mixtures amended with cement and lime to assess their applicability as highway subbase materials. The mixtures were compacted in the laboratory at a variety of moisture contents and compactive efforts and subjected to unconfined compression, California bearing ratio, and hydraulic conductivity tests. The environmental suitability of the prepared mixtures was evaluated by analyzing the effluent collected during hydraulic conductivity tests. Finally, required subbase thicknesses were calculated using the laboratory-based strength parameters. The results of the study show that the strength of a mixture is highly dependent on the curing period, compactive energy, lime or cement presence, and water content at compaction. The resistance of foundry sand-based specimens to winter conditions is generally better than that of a typical subbase reference material. Laboratory leaching tests indicated that if these mixtures later come in contact with water that has been discharged directly to the environment (e.g., drainage through asphalt pavement), the quality of water will not be affected.     

Alkali-silica reactions of mortars produced by using waste glass as fine aggregate and admixtures such as fly ash and Li2CO3

Use of waste glass or glass cullet (GC) as concrete aggregate is becoming more widespread each day because of the increase in resource efficiency. Recycling of wastes is very important for sustainable development. When glass is used as aggregate in concrete or mortar, expansions and internal stresses occur due to an alkali-silica reaction (ASR). Furthermore, rapid loss in durability is generally observed due to extreme crack formation and an increase in permeability. It is necessary to use some kind of chemical or mineral admixture to reduce crack formation. In this study, mortar bars are produced by using three different colors of glass in four different quantities as fine aggregate by weight, and the effects of these glass aggregates on ASR are investigated, corresponding to ASTM C 1260. Additionally, in order to reduce the expansions of mortars, 10% and 20% fly ash (FA) as mineral admixture and 1% and 2% Li(2)CO(3) as chemical admixture are incorporated by weight in the cement and their effects on expansion are examined. It is observed that among white (WG), green (GG) and brown glass (BG) aggregates, WG aggregate causes the greatest expansion. In addition, expansion increases with an increase in amount of glass. According to the test results, it is seen that over 20% FA and 2% Li(2)CO(3) replacements are required to produce mortars which have expansion values below the 0.2% critical value when exposed to ASR. However, usages of these admixtures reduce expansions occurring because of ASR.     

Biological nutrient removal from pre-treated landfill leachate in a sequencing batch reactor

Biological treatment of landfill leachate usually results in low nutrient removals because of high chemical oxygen demand (COD), high ammonium-N content and the presence of toxic compounds such as heavy metals. Landfill leachate with high COD content was pre-treated by coagulation-flocculation with lime followed by air stripping of ammonia at pH=12. Nutrient removal from pre-treated leachate was carried out using a lab-scale sequencing batch reactor (SBR). Three different operations consisting of different numbers of steps were tested and their performances were compared. These operations were the three-step anaerobic (An)/anoxic (Ax)/oxic (Ox); the four-step (An/Ox/Ax/Ox), and the five-step (An/Ax/Ox/Ax/Ox) operations with total residence time of seven hours each. Experiments were carried out using three consecutive operations with a total cycle time of 21 h at a constant sludge age of 10 days. The lowest effluent nutrient levels were realized by using the five-step operation which resulted in effluent COD, NH4-N and PO4-P contents of 1,400, 107 and 65 mg l(-1), respectively, at the end of 21 h. Addition of domestic wastewater (1/1, v/v) and powdered activated carbon (PAC, 1 g l(-1)) to the pre-treated leachate improved nutrient removals in the five-step SBR operation, resulting in 75% COD, 44% NH4-N and 44% PO4-P removals after 21 hours of operation.     

Applications of Venturi Principle to Water Aeration Systems

The concentration of dissolved oxygen is an important indicator of water quality because aquatic life lives on the dissolved oxygen in the water. Aeration can increase dissolved oxygen when levels become deficient. Hydraulic structures can significantly improve dissolved oxygen levels by creating turbulent conditions where small air bubbles are carried into the bulk of the flow. Recent researches have focused on developing measurement and predictive techniques for oxygen transfer at hydraulic structures to maintain and enhance water quality. However, reviewing existing studies on aeration performance of hydraulic structures, it seems that there are not too many studies on venturi aeration. The present paper shows applications of venturi principle to water aeration systems. The aeration characteristics of venturi nozzle, venturi conduit and venturi weir are analyzed. The results indicate that venturi aeration might contribute significantly to air entrainment and aeration efficiency. Therefore, venturi device can be used as highly effective aerator in aeration processes.     

Effects of Starch Sources and Supplementary Materials on Starch Based Foam Trays

Firstly, foam trays were produced from glyoxal cross-linked wheat, potato and corn starches and their mixtures. The most suitable starch type for starch-based foam tray production was selected according to the level of water absorption, density, surface and cross-section micrographs of the foam trays. It was decided that a wheat and potato starch blend was the most suitable starch source for producing the foam trays because they have the lowest water absorption percentage (25.5 ± 0.7%), low density (0.17 ± 0.01 g/cm³) and a smooth surface. Potato–wheat starch foam trays with fibres were produced by adding wheat and wood fibres. Unlike wood fibres addition, wheat fibres significantly decreased the percentage of water absorption (16.63 ± 1.2%) and density (0.115 ± 0.013 g/cm³) of the tray. Also, the trays including wheat fibre had a lighter colour than the wheat–potato starch tray. To further reduce water absorption of the tray, the trays were made by adding two different types of lipids (beeswax or shortening and three different types of filler materials—kaolin, montmorillonite or zinc oxide nanoparticles). According to the level of water absorption of the trays, it was decided that shortening and zinc oxide nanoparticles, in addition to kaolin, were respectively the most suitable lipid and filler materials. The foam trays were produced by adding these supplementary materials. The addition of shortening slightly, zinc oxide nanoparticles moderately and kaolin greatly increased the density of the wheat potato starch tray including fibre. However, the percent of water absorption of the trays containing wheat fibre + shortening or wheat fibre + shortening + zinc oxide nanoparticles decreased 6.4 ± 0.01 and 5.9 ± 0.3%, respectively.