The stability of butyltin compounds in a dredged heavily-contaminated sediment

A treatment process for marine sediment heavily contaminated with tributyltin (TBT) was designed that included dehydrating, sunlight drying and dumping processes. The time course in butyltin (BTs) compounds, TBT, dibutyltin (DBT) and monobutyltin concentrations were investigated in the sediment treated under various conditions (light (UV, sunlight and light exclusion), moisture (air-drying and water saturation) and wetting and drying cycles). Significant changes in all the BT compound concentrations with time were not found regardless of the sediment conditions for light and moisture. The results indicated the high stabilities of TBT and DBT in the sediments versus light and moisture condition changes, probably taking place in the treatment process. It is also estimated that the BTs in the sediment are resistant to photo-degradation and biochemical degradation and their half lives are relatively long. In contrast, the decreases in the TBT and DBT were observed during the wetting and drying cycle treatment for the water saturated sediment both during exposure to sunlight and under a dark condition. This result suggested the hypothesis that the TBT degradation could be accelerated by the high microbial activity induced by the moisture changing treatments.     

End-of-life vehicle recycling and automobile shredder residue management in Japan

The Japanese Government introduced the Law on Recycling of End-of-Life Vehicles (ELV Recycling Law) in 2002. This law requires manufacturers to retrieve chlorofluorocarbons (CFCs), airbags, and automobile shredder residue (ASR) from ELVs and to properly recycle the remaining materials. This framework is compared with European ELV directives. Pilot-scale incineration plant testing has revealed a greater formation of by-product persistent organic pollutants (POPs) during the primary combustion of ASR compared to normal municipal solid waste. This may be attributed to the abundance of chlorine, Cu, and Fe in ASR, as Cu and Fe have been found to catalyze the formation of POPs under certain conditions. However, most by-product POPs were destroyed by the secondary combustion, and almost all were removed after flue gas treatment. The direct melting system is a shaft-type gasification and melting technology that has proved effective in many municipal solid waste applications. This system can be applied to ASR recycling for effective decomposition of brominated flame retardants and polybrominated dioxins.     

Investigation of saponification for determination of polychlorinated biphenyls in marine sediments

The effects of saponification conditions (temperature and water content of saponifying solution) on the determination of chlorinated biphenyls (CBs) in marine sediments were investigated. Although highly chlorinated biphenyls (nona- to deca-CBs) decomposed during high-temperature saponification, the degree of degradation was reduced by adding water to the ethanolic potassium hydroxide saponifying solution. Room-temperature saponification yielded quantitative recovery of highly chlorinated biphenyl surrogates but low extraction efficiencies of lightly chlorinated biphenyls (mono- to di-CBs). The same samples were analyzed by other extraction techniques, for example, pressurized liquid extraction, and analytical results were compared. The mono- and di-CB concentrations were correlated with the extraction temperatures of various extraction techniques. In particular, the concentrations of some CB congeners (CB11, CB14) were higher with saponification. The low degree of degradation of highly chlorinated biphenyls and the high recovery of lightly chlorinated biphenyls were compatible when room-temperature and high-temperature saponification were combined. Except for the anomalies of CB11 and CB14, the combined method gave satisfactory results for analysis of PCBs.     

Concentrations, enrichment and predominant sources of Sb and other trace elements in size classified airborne particulate matter collected in Tokyo from 1995 to 2004

APM was collected and trace elements existing in the particles were monitored since May 1995 in this study. APM sample was collected separately by size (d < 2 microm, 2-11 microm and >11 microm) on the roof of the university building (45 m above ground) in the campus of Faculty of Science and Engineering, Chuo University, Tokyo, Japan, using an Anderson low volume air sampler. The collected sample was digested by HNO3, H2O2 and HF using a microwave oven, and major elements (Na, Mg, Al, K, Ca and Fe) were measured by ICP-AES, and trace elements (Li, Be, Ti, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Cd, Sb, Ba and Pb) were measured by ICP-MS. It was observed that the APM concentration was higher between the winter and the spring, compared to during the summer. The enrichment factor was calculated for each element in each set of APM (d < 2 microm, 2-11 microm and >11 microm). Seasonal trends of enrichment factors were examined, and the elements were classified into 3 groups according to the common seasonal behavior. It is likely that the elements in the same group have common origins. Toxic pollutant elements (Sb, Se, Cd, Pb and As) were found in small particles with d of <2 microm in concentrated levels. Antimony (Sb) had the highest enrichment factor, and the results suggested that Sb level in APM was extremely high. The origins of Sb were sought, and wastes from plastic incineration and brake pad wears of automobiles were suspected. Each set of APM (d < 2 microm, 2-11 microm and >11 microm) was classified by the shape, and the shape-dependent constituents of a single APM particle were quantitatively measured by SEM-EDX. High concentration of Sb was found in APM <2 microm and square particles. Particles less than 2 microm and square shaped particles were major particles produced by actual car braking experiments. From these experimental results it was concluded that the source of Sb in squared APM <2 microm is considered to be from brake pad wear.     

Investigation on chemical species of arsenic, selenium and antimony in fly ash from coal fuel thermal power stations

Investigations of the existing chemical forms and the concentrations of arsenic (As), selenium (Se) and antimony (Sb) in samples of fly ash obtained from six coal-fired power stations in various countries were carried out. The concentration of As was found to vary from 5.4 to 22.3 mg kg(-1), and the most common mode of occurrence of As in the fly ashes is in association with carbonates or Fe-Mn oxides. The concentrations of Se and Sb ranged from 2.3-5.2 and 1.0-3.9 mg kg(-1), respectively. The dominant chemical forms of Se and Sb in the fly ashes were as extractable species. Also, water-soluble As, Se and Sb in the fly ashes were extracted, and the chemical species of As, Se and Sb in the extract determined using HPLC-ICP-MS. This was done as the potential release of soluble As, Se and Sb through leaching of fly ash is of environmental concern. The most abundant form of As in the extract was the low toxicity As(V). The main species of Se was Se(IV), although it was found that the ratio of Se(VI) to Se(IV) in acidic fly ashes is higher than in alkaline fly ash samples. Antimony was mostly present as Sb(III).     

Numerical analysis of gas explosion inside two rooms connected by ducts

Simulations of gas explosion of hydrogen/air mixture inside two rooms connected by ducts are carried out. Scalar transport chemical reaction model and LES turbulence model are utilized to reduce the calculation load and to conduct real-scale analysis. The effects of ignition source locations and volume of ignited room are analyzed, and the time history of pressure and rate of pressure rise in each room are focused in this study. When the volume of the ignited room is larger than the other room, the high pressure from the other room causes a force to act on the partition to the ignited room. This study indicates that the current technique can predict specific features of gas explosions inside two rooms connected by the ducts.     

Bioremediation of cadmium contaminated soil using symbiosis between leguminous plant and recombinant rhizobia with the MTL4 and the PCS genes

Cadmium contamination in rice grains is one of the important issues in Asian countries. We have developed a novel bio-remediation system based on the symbiosis between leguminous plant and genetically engineered rhizobia. We designed two types of recombinant rhizobia, carrying two genes, synthetic tetrameric metallothionein (MTL4) and cDNA encoding phytochelatin synthase from Arabidopsis thaliana (AtPCS). The MTL4 and AtPCS genes were transferred to Mesorhizobium huakuii subsp. rengei B3, which can infect and form nodules on Chinese milk vetch, Astragalus sinicus. The two genes were fused to the nolB or nifH promoter, which generated nodule specific expression of these genes in strain B3. The two recombinant strains, B3(pMPnolBMTL4nifHPCS) and B3::nifHMTL4(pMPnifHPCS), showed 25 and 12-fold increase in Cd concentration, in the free-living cells, respectively. When these recombinant strains established the symbiotic relationship with A. sinicus, the symbionts increased Cd accumulation in nodules by two-fold in hydroponic culture. The expression of the both MTL4 and AtPCS genes showed additive effect on cadmium accumulation in nodules. We also applied these recombinant bacteria to rice paddy soil polluted with Cd (1mgkg(-1) dry weight soil). The accumulation of Cd increased not only in nodules but also in the roots of A. sinicus infected by the recombinant rhizobia. The accumulation of Cd in the plant roots infected by B3(pMPnolBMTL4nifHPCS) achieved three-fold than that by the wild-type B3. After two months of cultivation of the symbiont, a maximum of 9% of Cd in paddy soil was removed. Thus, the symbiosis will be useful in phytoremediation for heavy metals.     

The dynamics of mercury around an artisanal and small-scale gold mining area,Camarines Norte,Philippines

Environmental Science and Pollution Research - To elucidate the dynamics of mercury emitted and released by artisanal and small-scale gold mining (ASGM) activity and to estimate its impact on the...     

Navigating Institutional Challenges: Design to Enable Community Participation in Social Learning for Freshwater Planning

Social learning is a process suited to developing understanding and concerted action to tackle complex resource dilemmas, such as freshwater management. Research has begun to recognise that in practice social learning encounters a variety of institutional challenges from the shared habits and routines of stakeholders (organised by rules, norms and strategies) that are embedded in organisational structures and norms of professional behaviour. These institutional habits and routines influence the degree of willingness to engage with stakeholders, and expectations of behaviours in social learning processes. Considering this, there has been a call to understand how institutions influence social learning and emergent outcomes. We addresses this by presenting a heuristic for implementing social learning cognisant of institutional context to answer three questions: (i) How institutional influences impact implementation of social learning design; (ii) how implementation of social learning design modifies institutions influencing social learning; and (iii) how these changes in design and institutions together shape social learning outcomes? To answer these questions a freshwater planning exercise was designed, implemented and evaluated as a social learning process with community groups in two New Zealand catchments. Incorporating participatory reflection enabled the project team to modify social learning design to manage institutional influences hindering progress toward outcomes. Findings emphasise that social learning is underpinned by participants’ changing assumptions about what constitutes the institution of learning itself—from instruction to a dynamic, collective and emergent process. Reflecting on these assumptions also challenged participants’ expectations about their own and others’ behaviours and roles in freshwater planning.