Alginate beads containing water treatment residuals for arsenic removal from water—formation and adsorption studies

Water treatment residuals (WTRs) produced in large quantities during deironing and demanganization of infiltration water, due to high content of iron and manganese oxides, exhibit excellent sorptive properties toward arsenate and arsenite. Nonetheless, since they consist of microparticles, their practical use as an adsorbent is limited by difficulties with separation from treated solutions. The aim of this study was entrapment of chemically pretreated WTR into calcium alginate polymer and examination of sorptive properties of the obtained composite sorbent toward As(III) and As(V). Different products were formed varying in WTR content as well as in density of alginate matrix. In order to determine the key parameters of the adsorption process, both equilibrium and kinetic studies were conducted. The best properties were exhibited by a sorbent containing 5 % residuals, formed in alginate solution with a concentration of 1 %. In slightly acidic conditions (pH 4.5), its maximum sorption capacity was 3.4 and 2.9 mg g^?1 for As(III) and As(V), respectively. At neutral pH, the adsorption effectiveness decreased to 3.3 mg As g^?1 for arsenites and to 0.7 mg As g^?1 for arsenates. The presence of carboxylic groups in polymer chains impeded in neutral conditions the diffusion of anions into sorbent beads; therefore, the main rate-limiting step of the adsorption, mainly in the case of arsenates, was intraparticle diffusion. The optimal condition for simultaneous removal of arsenates and arsenites from water by means of the obtained composite sorbent is slightly acidic pH, ensuring similar adsorption effectiveness for both arsenic species.     

An assessment of heavy-metal contamination in surface sediments of the Suez Gulf using geoaccumulation indexes and statistical analysis

An assessment of marine pollution due to metals was made in the Suez Gulf based on surface costal sediment collected from 18 locations along the Gulf. The samples were dried and acid-digested, and the metal contents (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) were determined using a flame atomic absorption spectrophotometer (air-acetylene) with deuterium background correction. An evaluation of the heavy-metal pollution status of the Gulf was carried out using enrichment factors (EF) and geo-accumulation Indexes (I_geo). Also, heavy-metal concentrations in Suez Gulf sediments were evaluated using the Effect Range-Low (ERL) and the Effect Range-Median (ERM). The results of a Spearman correlation and factor and cluster analysis of the heavy metals analysed in the collected sediment were discussed. The main source of contamination is offshore oil field and industrial wastes, which arise due to the ineffective and inefficient operation equipments, illegal discharge and lack of supervision, and prosecution of offenders.     

Speciation of organotin compounds in sediments of semi-closed areas along the Mediterranean coast of Alexandria

Organotin compounds were measured in sediments of four different semi-closed areas of the Mediterranean coast of Alexandria: the Eastern Harbour, Western Harbour, El-Max Bay, and Abu-Qir Bay. Due to the commercial trade activity inside the Western Harbour, in addition to the effect of wastes discharged from El Noubaria canal, it shows the highest concentrations of total tin (6.34 μg g^-1 dry weight), dibutyl tin (1.63 μg g^-1 wet weight), tributyl tin (0.33 μg g^-1 wet weight) and diphenyl tin (1.06 μg g^-1 wet weight) compared with other locations. The concentrations of TBT species showed the highest contents compared with DBT and DPhT compounds in all sampling areas. This trend might be due to the worldwide use of TBT not only as biocides in antifouling paints but also as preserving agents for wood, fungicides in agricultural activities, and heat and UV stabilizers of PVC, which results in a direct release of TBT into the water body, accumulation in aquatic fauna. There is also precipitation into sediments and a decrease in degradation rate into its derivatives. Variations, types, concentrations, and distribution of different organotin compounds are discussed in the areas under investigation. The study reveals a new record of organotin compounds along the Alexandria coast and makes comparisons with other surrounding areas of interest.     

Extension of twoCaulerpa species along the Tunisian coast

Two species of the green alga genusCaulerpa are considered as invasive in Tunisia:Caulerpa racemosa andC. taxifolia. C. racemosa is found in a many new localities at the central and southern Tunisian coast, and even in the North of the country in colder water. These new observations lead to the hypothesis of the multiplicity of the origins of the introduction of the species and suggest possible invasive potentialities. The general thallus, and more particularly the number, the shape as well as the arrangement of ramelli on fronds allowed us to identify four morphologically different groups. These groups could be either different systematic entities or polymorphic variations of the same taxon due to different ecological conditions.Caulerpa taxifolia was observed for the first time in Tunisia at the roadstead of Sousse in the beginning of the year 2000. It is recognized as identical to that found in the other Mediterranean localities (GenBank number AJ228960). Up to the end of March 2000, a submarine prospecting campaign revealed an affected area of about 350 ha in front of 2 km of coast. Colonies ofCaulerpa taxifolia disseminating in this area appear in isolated spots. form, In the growing stage, they form surfaces varying between 0.5 to 6 m² and located 20 to 100 m from each other. The total covered surface was estimated to be between 0.5 and 1 ha.     

Contamination of polycyclic aromatic hydrocarbons (PAHs) in microlayer and subsurface waters along Alexandria coast,Egypt

The residues of seven polycyclic aromatic hydrocarbons (PAHs) pollutants in microlayer and subsurface seawater samples collected from Alexandria coast, Egypt, were analyzed by gas chromatography–electron-impact mass spectrometry-selected ion monitoring mode (GC–MS-SIM). The pollutants studied were, fluorene, phenanthrene, anthracene, fluoranthene, pyrene, chrysene and benzo[a]pyrene. Total PAH levels in microlayer ranged from 103 to 523 ng/l, while it ranged in subsurface samples from 13 to 120 ng/l. The Western Harbor location recorded the highest level of PAHs pollutant over all the other location for both subsurface and microlayer waters. The two major PAHs in microlayer water at the Western Harbor were fluorene and phenanthrene, making up 27% and 20% of the total PAHs, while the two major PAHs in subsurface water at the Eastern Harbor were phenanthrene and fluoranthene recording up 21% each of the total PAHs. The total PAH levels were generally in the nano-gram per liter for microlayer and subsurface seawater samples. The dominant PAHs in both subsurface and microlayer samples were fluoranthene, pyrene and benzo[a]pyrene. The microlayer enrichment factor at Alexandria’s Mediterranean coast was ranged from 29 for fluorene to 3 for phenanthrene and benzo[a]pyrene which showed PAHs concentration in the microlayer with an average of five times more than the total PAH in the subsurface samples.     

Invasive plants as biosorbents for environmental remediation: a review

Environmental Chemistry Letters - Water contamination is an environmental burden for the next generations, calling for advanced methods such as adsorption to remove pollutants. For instance,...     

Conditions for the development of anaerobic digestion technologies using the organic fraction of municipal solid waste: perspectives for Poland

This article outlines problems related to the location of facilities designed to treat the organic fraction of municipal solid waste (OFMSW). Anaerobic digestion (AD) facilities are investigated as a treatment option, while taking into account the aspects of renewable energy generation. This research has been spurred on by the relationship between waste management, energy generation issues and spatial planning procedures. The analysis is focused on urban and semi-urban areas of medium and large cities. One of the most difficult issues associated with siting of waste processing plants is its integration with local infrastructures, avoiding conflicts and negative environmental impacts at the same time. This research aims to analyse possible locations for AD plants fuelled by OFMSW in Poland. Based on the experience gained from other countries and lessons learnt from the analysis of existing facilities in Europe, conditions for the location of this type of waste treatment plants have been defined, with the focus on economic, environmental and social issues. Most likely, the results of the multicriteria decision analysis for siting of municipal solid waste AD plants (M-BIST tool) could be transferred to other countries, especially those with a comparable GDP level and a similar framework for a waste management system.